20 NOVEMBER

THE NEW ZEALAND GAZETTE

2345

Tariff Notice No. 1969/129—Application for Variation of Approval

NOTICE is hereby given that an application has been made for variation of a current approval of the Minister of Customs as follows:

84.61 Current Approval:
Cocks and valves:
Excluding—
(1) Penstocks, floodgates
(2) Valves, gate, of the following types:
(a) Stainless steel 3 in. to 18 in., or cast iron 3 in.
to 14 in., specially suited for use with
pulp or paper stock
(b) Brass, ½ in. and ¾ in.
(c) ⅜ in. to 4 in. of any kind of bronze
(3) Valves, globe, of any kind of bronze, suited for
use with steam at working pressures of 50 lb
psi or over, of the following types:
(a) Stainless steel seats, screwed ¼ in. to 2 in.
(b) Yoke top with bronze or stainless steel seats,
flanged ¾ in. to 6 in.
(c) Angle yoke top with bronze or stainless steel
seats, flanged, 1 in. to 3 in.
(d) Valves, safety, spring-loaded, screwed or
flanged, ⅜ in. to 4 in.
(e) Fibre or teflon seats, screwed, sizes ½ in. to
2 in.
(4) Valves, foot, of copper alloy, not exceeding 2 in.
(5) Valves, float (sometimes known as “ball”), of
brass or other copper alloy, not exceeding 6 in.
(6) Sluice or wedge gate valves, cast iron, 4 in.,
6 in., and 8 in. double flange or spigot ends,
hand-operated waterworks pattern, for test
pressures not exceeding 600 ft head of water,
not including similar valves with zinc free
bronze trim (U.K. Specification BS 1218 class

1. (7) Check valves (reflux), cast iron, 3 in., 4 in.,
   and 6 in. Standard type for test pressures
   not exceeding 600 ft head of water, not including special non-concussive types of valves with external operating levers
   (8) Plugcocks, bronze, screwed and flanged straight through or 3-way, sizes ½ in. to 4 in. (but not sleeve packed plugcocks)
   (9) Valves of a type used on bulk fuel tankers, viz:
   (a) Pressure vacuum valves, aluminium, screwed
   (b) Bottom outlet valves, aluminium or bronze,
   sizes 3 in. and 4 in., flanged
   (NOTE—This approval does not cover taps, bibcocks, or fire hydrants)

Requested Approval:
Cocks and valves
Excluding—
(1) Penstocks, floodgates
(2) Valves, gate, of the following types:
(a) Stainless steel 3 in. to 18 in., or cast iron 3 in. to 14 in., specially suited for use with pulp or paper stock
(b) Brass, ½ in. and ¾ in.
(c) ⅜ in. to 4 in. of any kind of bronze
(3) Valves, globe, of any kind of bronze, suited for use with steam at working pressures of 50 lb psi, or over, of the following types:
(a) Stainless steel seats, screwed ⅜ in. to 2 in.
(b) Yoke top with bronze or stainless steel seats, flanged ⅜ in. to 6 in.
(c) Angle, yoke top with bronze or stainless steel seats, flanged, 1 in. to 3 in.
(d) Valves, safety, spring-loaded, screwed or flanged, ⅜ in. to 4 in.
(e) Fibre or teflon seats, screwed, sizes ½ in. to 2 in.
(4) Valves, foot, of copper alloy, not exceeding 2 in.
(5) Valves, float (sometimes known as “ball”)
(a) Brass or other copper alloy, not exceeding 6 in.
(b) Screwed, stainless steel and mild steel bodies, sizes ⅜ in. to 2 in. B.S.P.
(c) Flanged, cast stainless steel or cast steel, sizes 3 in. and 4 in.

Free
20%
25%
10.2

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69

45
2/69
12/69