NEW ZEALAND GAZETTE, No. 83 — 30 JULY 2015

16. In the band 5150 – 5250 MHz, the maximum power is -7 dBW (200 mW) e.i.r.p. and the maximum permitted power spectral density is -20 dBW/MHz (10 mW/MHz) e.i.r.p. or equivalently -36 dBW/25 kHz (0.25 mW/25 kHz) e.i.r.p.

17. Indoor-Only Systems: In the band 5250 – 5350 MHz, the maximum power is -7 dBW (200 mW) e.i.r.p. and the maximum permitted power spectral density is -20 dBW/MHz (10 mW/MHz) e.i.r.p., provided Dynamic Frequency Selection and Transmitter Power Control are implemented. If Transmitter Power Control is not used, then the maximum power (e.i.r.p.) value must be reduced by 3 dB;

Indoor and Outdoor Systems: In the band 5250 – 5350 MHz, the maximum power is 0 dBW (1 W) e.i.r.p. and the maximum permitted power spectral density is -13 dBW/MHz (50 mW/MHz) e.i.r.p., provided Dynamic Frequency Selection and Transmitter Power Control are implemented in conjunction with the following vertical radiation angle mask where θ is the angle above the local horizontal plane (of the Earth):

18. In the band 5470 – 5725 MHz, the transmitter peak power must not exceed -6 dBW (250 mW). The maximum power is 0 dBW (1 W) e.i.r.p. and the maximum permitted power spectral density is -13 dBW/MHz (50 mW/MHz) e.i.r.p., provided Dynamic Frequency Selection and Transmitter Power Control are implemented. If Transmitter Power Control is not in use, then the maximum power (e.i.r.p.) value must be reduced by 3 dB.

19. In the band 7.4 – 8.8 MHz, use is restricted to inductive systems where the magnetic field strength from devices must not exceed 9 dBµA/m at a distance of 10 metres.

20. In the band 3.155 – 3.400 MHz, the maximum permitted field strength is 13.5 dBµA/m measured in a 10 kHz bandwidth at a distance of 10 metres. In the bands 3.64 – 4.04 MHz and 10.44 – 10.76 MHz, the maximum permitted field strengths are -15 dBµA/m and -20 dBµA/m, respectively, both measured in a 10 kHz bandwidth at 10 metres.

21. In the band 49.82 – 49.98 MHz, transmissions are permitted under this licence from 1 September 2015.

22. Indoor-Only Systems: In the band 57 – 66 GHz, the power spectral density must not exceed -17 dBW/MHz (20mW/MHz) e.i.r.p.

23. Transmissions from devices operating in the band 921 – 928 MHz must not exceed the following unwanted emission limits: -79 dBW (-49 dBm) from 800 – 915 MHz, then varying from -79 dBW (-49 dBm) at 915 MHz to -66 dBW (-36 dBm) at 921 MHz in accordance with the formula y = mx + C, where y = dBm, x = MHz, m = dy/dx, C = the value of y where x = 0 (the y intercept). The maximum value of -63 dBW (-33 dBm) applies from 928 MHz to 1 GHz. The reference bandwidth for emissions is 100 kHz. Outside the band 800 MHz to 1 GHz, the limits prescribed in applicable standards prescribed in the Radiocommunications (Radio Standards) Notice 2015 apply. In the absence of applicable standards, the limits prescribed in Table 2 of the notice apply.

24. (deleted)

25. In the band 0.009 – 0.090 MHz, the magnetic field strength from devices must not exceed 72 dBµA/m at a distance of 10 metres. In the band 0.090 – 0.205 MHz, the magnetic field strength from devices must not exceed 43 dBµA/m at a distance of 10 metres, except in the band 0.119 – 0.135 MHz, where the magnetic field strength from devices must not exceed 66 dBµA/m at a distance of 10 metres. In the band 0.370 – 0.430 MHz, the magnetic field strength from devices must not exceed -5 dBµA/m at a distance of 10 metres.

26. Use is limited to the purpose known as radio microphones (also known as wireless microphones, in ear monitors or wireless audio transmitters). Analogue modulation schemes are permitted with a maximum necessary bandwidth of 300 kHz. Digital modulation schemes are permitted with a maximum necessary

41