Incorporated Material by Reference




12 DECEMBER 2013 NEW ZEALAND GAZETTE, No. 167

ISO Guide 34:2000 General requirements for the competence of reference material producers.

ISO Guide 34:2000 General requirements for the competence of reference material producers.

USEPA - Method 3A - Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure) (2006).

USEPA - Method 3C - Determination of Carbon Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources (1996).

GPA Standard 2166-05 Obtaining Natural Gas Samples for Analysis by Gas Chromatography.

ASTM D1945-03 Standard Test Method for Analysis of Natural Gas by Gas Chromatography.

The Aluminium Sector Greenhouse Gas Protocol (Addendum to the WRI/WBCSD Greenhouse Gas Protocol) - October 2006 (produced by the International Aluminium Institute).

ASHRAE 34-2007 Designation and Safety Classification of Refrigerants published in 2007 by the American Standards Institute/American Society of Heating, Refrigeration and Air-Conditioning Engineers, Inc.

ISO 1170:1977 Coal and coke—Calculation of analyses to different bases.

ISO 501:2003 Hard coal—Determination of the crucible swelling number.

Climate Change (Unique Emissions Factors) Regulations 2009 (first made on 28 September 2009) incorporated the following material by reference:

ASTM D6348 03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy.

ASTM D6866 - 08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis.

VDI 2469-1:2005 Gaseous emission measurement - Measurement of nitrous oxide - Manual gas chromatographic method, February 2005.

ISO 14164:1999(E) Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method.

ISO 12039:2001(E) Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems.

ISO 10780:1994(E) Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts.

USEPA - Method 3A - Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure) (2006).

USEPA - Method 3C - Determination of Carbon Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources (1996).

ISO 18283:2006(E) Hard coal and coke - Manual sampling.

ISO 1928:1995(E) Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value.

ISO 5068-1:2007(E) Brown coals and lignites - Determination of moisture content - Part 1: Indirect gravimetric method for total moisture.

ISO 1171:1997(E) Solid mineral fuels - determination of ash content.

AS 1038.6.4-2005 Coal and coke - Analysis and testing Part 6.4: Higher rank coal and coke - Ultimate analysis - Carbon, hydrogen and nitrogen - Instrumental method.

ASTM D3174 04 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal.

ISO/TS 12902:2001(E) Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods.

ASTM D 3302 Standard Test Method for Total Moisture in Coal.

ASTM E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis.

ASTM E1675-04 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis.

NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories.

ISO 4259:2006(E) Petroleum products - Determination and application of precision data in relation to methods of test.

ASTM D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen and Nitrogen in Petroleum Products and Lubricants.

ASTM D1298-99 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.

ISO 3675:1998(E) Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method.

DD CEN/TS 14778-1:2005 Solid biofuels - Sampling - Part 1: Methods for sampling.

DD CEN/TS 15442:2006 Solid recovered fuels - Methods for sampling.

ASTM D4057-06 Standard Practice for Manual Sampling of Petroleum and Petroleum Products.

ASTM D4177-95 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products.

ISO 3170:2004(E) Petroleum liquids - Manual sampling.

DD CEN/TS 15407:2006 Solid recovered fuels - Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content.

DD CEN/TS 15400:2006 Solid recovered fuels - Determination of calorific value.

ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter.

ISO 5167-1:2003(E) Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements.

DD CEN/TS 15440:2006 Solid recovered fuels - Methods for the determination of biomass content.



Next Page →



Online Sources for this page:

Gazette.govt.nz PDF NZ Gazette 2013, No 167





✨ LLM interpretation of page content

Notice of Material Incorporated by Reference in Climate Change Regulations (continued from previous page)

Environment
Climate Change Response Act 2002, Regulations, Incorporated Material