✨ LPG Fuel Container Approval, Reserve Bank Notice, Land Notices
4486 NEW ZEALAND GAZETTE, No. 162 5 DECEMBER 2013
Schedule
| Reference No. | Manufacturer | Country of Origin | Specification | Material | Inspection Authority | Maximum Service Pressure (MPa) | Test Pressure (MPa) |
|---|---|---|---|---|---|---|---|
| AF L03B 046 | Antech Manufacturing Limited | New Zealand | AS/NZS 3509 | Carbon steel | I.Q.S. | 2.55 | 3.30 |
Conditions of Approval
These LPG fuel containers are approved subject to the following conditions:
-
That they are permanently and clearly marked, on a suitable attached metal plate, with characters not less than 2mm high, displaying the following information:
(a) The specification to which the container was manufactured.
(b) The manufacturer’s name or mark.
(c) The serial number of the container. Alternatively, this can be stamped on to the container valve pad.
(d) The date of the original container inspection and the identification mark of the inspection authority which carried out the inspection.
(e) The date of any periodic container test and the identification mark of the cylinder testing station which carried out the test.
(f) The container test pressure.
(g) The nominal water capacity of the container. -
That the container surface coating be in accordance with the requirements in Australian/New Zealand Standard AS/NZS 3509.
-
That they are provided with valve threads and fittings which provide the following functions:
(a) Filling connection incorporating a non-return valve.
(b) Service valve incorporating an excess flow valve.
(c) Contents gauge.
(d) Pressure relief valve.
(e) Automatic fill limiter which prevents the container being filled beyond 85% of the total container capacity.
(f) Valves and fittings must have a service pressure rating of at least that of the container to which they are fitted and must comply with the requirements in section 3 of Australian/New Zealand Standard AS/NZS 1425. -
That they are tested prior to installation, and at periods not exceeding 10 years, in accordance with the requirements of Australian Standard AS 2337.
Signed at Wellington this 29th day of November 2013.
H. C. MATHESON, Principal Engineer Vehicles, NZ Transport Agency.
au7742
Reserve Bank of New Zealand
Reserve Bank of New Zealand Act 1989
Notice of Approval of Application Fee for Registration of Covered Bond Programmes
Pursuant to section 139(E)(2)(b) of the Reserve Bank of New Zealand Act 1989, the Minister of Finance hereby approves the application fee of $\$2,500 (including GST) to accompany an application to have a covered bond programme registered under the Reserve Bank of New Zealand Act 1989.
Dated at Wellington this 5th day of December 2013.
HON BILL ENGLISH, Minister of Finance.
au7779
Land Notices
Conservation Act 1987
North Auckland Land District—Kaipara District
Schedule
Declaration That Marginal Strip Not Required
Under section 24B(2)(b) of the Conservation Act 1987, the Minister of Conservation declares that the marginal strip requirements set out in section 24 of the Act shall not apply in the case of the disposition of the land described in the Schedule.
| Area m² | Description |
|---|---|
| 6033 | Section 2 SO 437927 |
| 1909 | Section 3 SO 437927 |
| 4484 | Section 4 SO 437927 |
Next Page →
NZ Gazette 2013, No 162
✨ LLM interpretation of page content
🚂
Automotive LPG Fuel Container Approval
(continued from previous page)
🚂 Transport & Communications29 November 2013
Land Transport Rule, Vehicle Equipment, LPG Fuel Container, NZ Transport Agency
- H. C. Matheson, Principal Engineer Vehicles, NZ Transport Agency
💰 Reserve Bank of New Zealand Application Fee Approval
💰 Finance & Revenue5 December 2013
Reserve Bank of New Zealand Act 1989, Covered Bond Programmes, Application Fee
- Hon Bill English, Minister of Finance
🗺️ Declaration That Marginal Strip Not Required
🗺️ Lands, Settlement & SurveyConservation Act 1987, Marginal Strip, Land Disposition, Kaipara District