✨ Gaming Machine Technical Standards
976
NEW ZEALAND GAZETTE
No. 32
NZ1.4 Changes to Appendix
The Authority may issue amendments to sections or clauses in this Appendix either on its own volition or on application from industry stakeholders. Any such amendments will be subject to consultation with interested parties including New Zealand casino gaming machine suppliers, testing agencies, casino operators and the Department of Internal Affairs. The Authority will determine the effective date of any such changes. With each amendment, the version number will be incremented.
NZ2 Hardware Standards
NZ2.1 Keys and Locks (Ref NS2.3.21)
(i) Keys and locks which give access to the interior of a cabinet must be of a different combination to other keys and locks for other areas of the equipment unless otherwise approved by the Authority.
NZ2.2 Logic Area (Ref NS2.3.36…)
(i) A 6mm hole is required for affixing physical seals (NS2.3.43)
(ii) Where the logic cabinet is capable of being removed from a gaming machine cabinet in its entirety and replaced with another complete unit, the logic area shall be fitted with a device or devices that will detect removal regardless whether mains power is switched on or off.
NZ2.3 Hard Meters (Ref NS 2.4.10)
(i) The Authority has no requirement for electromechanical hard meters.
NZ2.4 Switchers and Jumpers (Ref NS 2.4.25…)
(i) The normal operation of a jumper or dipswitch device, if such device has a normal mode, must be clearly marked on or immediately adjacent to the device.
NZ2.5 Power Supply (Ref NS 2.4.27…)
(i) Where a gaming machine cabinet contains more than one power switch, each switch must clearly identify the unit to which it supplies power.
(ii) Communications interfaces are to be independently powered from other devices within the gaming machine to ensure continued monitoring during machine maintenance activities.
NZ2.6 Coin Hoppers (Ref NS 2.6.5)
(i) The following subclause shall be added to this section:
(ii) “(d) hopper disconnection/malfunction of coin out sensor.”
NZ3 Software Standards
NZ3.1 Residual Credit Removal Meters (Ref NS 3.3.22)
(i) Residual credit removal meters are required where the residual credit removal feature is offered.
Next Page →
Online Sources for this page:
VUW Te Waharoa —
NZ Gazette 2002, No 32
Gazette.govt.nz —
NZ Gazette 2002, No 32
✨ LLM interpretation of page content
🏭
Gaming Machine Testing and Approval Requirements
(continued from previous page)
🏭 Trade, Customs & IndustryGaming Machines, Testing, Approval, Modifications, Dispensations, Hardware Standards, Software Standards