NEW ZEALAND GAZETTE

1 JUNE

1295

Signed at Auckland this 24th day of May 2000.

JOHN RICHARD WOLFE, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 3 May 1999.
a3847

Traffic Sign—Speed Limit (Threshold)

Pursuant to section 129 (6) of the Traffic Regulations 1976, and pursuant to a subdelegation from the Director of Land Transport Safety by an instrument dated the 3rd day of May 1999, I, John Paul Edgar, Manager Safer Roads, authorise the erection, installation and maintenance of the Regulatory Traffic Sign described in the Schedule to this notice for the purposes of regulation 128 (4) of the Traffic Regulations 1976. The sign may be used in substitution for the sign described as regulation 22 (a) Speed Limit (Normal) in Part IV, Fourth Schedule to the Traffic Regulations 1976.

Schedule

Description of Traffic Sign

The Speed Limit (Threshold) permanent regulatory sign must conform to the layout depicted in the example diagram below and be in accordance with the following.

1. Shape and Size
   Rectangular 1900mm wide, 2700mm high

2. Background colour
   Reflectorised green background.

3. Border
   Reflectorised white border.

4. Legend
   (a) speed limit symbol:
   shape and size—circle 1300mm diameter
   background colour—reflectorised white
   border—reflectorised white
   legend—red roundel with 1200mm external diameter enclosing speed limit in kilometres an hour in black lettering 400mm high, stroke width 62mm.

   (b) place name:
   shape and size—lettering normally fitted within width of sign on one line as shown in the example and must be Modified Series E minimum 160mm high upper case and 120mm high lower case.
   colour—reflectorised white.

   (c) greeting message:
   shape and size—upper case lettering Series D of same size as the lower case lettering of the place name as shown in the example.
   colour—reflectorised white.

Dated at Wellington on this 26th day of May 2000.

JOHN PAUL EDGAR, Manager, Safer Roads.
a3941

Automotive LPG Fuel Container Approvals

Pursuant to regulation 90B of the Traffic Regulations 1976, and pursuant to the powers delegated to me by the Director of Land Transport Safety, I, John Andrew Justice, Acting Manager Safer Vehicle Policy, hereby approve the LPG fuel containers in the Schedule hereto, for inclusion in any LPG automotive fuel system installed and operated in accordance with the requirements of Australian/New Zealand Standard AS/NZS 1425:1999, subject to the conditions of approval set out in this notice.

Schedule

This approval only applies to containers as specified below:

AF L03B 039—Design Verification No. V0020206; APA Drg “Ford Au Sedan–Grizzly”, PP94666B.
AF L03B 040—Design Verification No. V9920579; APA Drg “Ford Au Wagon–Grizzly”, PP94665C.
AF L03B 041—Design Verification No. V167-92 (LH Cyl); APA Drg “Ford Ute–Osprey”, PP94594B.
AF L03B 042—Design Verification No. V164-92 (RH Cyl); APA Drg “Ford Ute–Osprey”, PP94594B.

Conditions of Approval

These LPG fuel containers are approved subject to the following conditions—

1. That they are permanently and clearly marked, on the container valve pad, with characters not less than 4mm high, displaying the following information:
   (a) The specification to which the container was manufactured.