19 OCTOBER
NEW ZEALAND GAZETTE
3743

Schedule 1
Vehicle details

Make: Nissan
Model: CG380
VIN No.: JNBCWB45000P02462

Configuration
8x4 rigid fitted with Patchell convertible unit

Bolster Nos
940705, 940706

Schedule 2
Conditions

(1) Bolster attachments to use existing design with 250,000km recorded truck operation without failure.

(2) Minor modifications to the existing design are only permissible if the certifier can demonstrate by calculation or approved type test that the performance and life of the bolster attachments have not been diminished by the modifications.

(3) This exemption will expire on recertification of the bolster attachments to a type testing process approved by the Log Transport Safety Committee and the Land Transport Safety Authority, or on the expiry of 6 months, whichever occurs soonest.

Signed at Wellington this 12th day of October 2000
P. WARING, acting under authority sub-delegated to me by way of an instrument of delegation dated 3 May 1999.

au7717

Traffic Regulations 1976

Exemption From Specified Requirements of the Traffic Regulations 1976

Pursuant to Regulation 90 (2) of the Traffic Regulations 1976, I, Paul Patrick Chapman, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Traffic Regulations 1976 listed in Schedule 2, subject to the conditions specified in Schedule 3.

Schedule 1
Vehicle details

Make: Cadillac
Model: Limousine
Year: 1985
VIN/chassis No.: 1G6AM6984E9159923

Schedule 2
Exempted requirements
Regulation 78A (c)

Schedule 3
Conditions

(i) All seat belts must be in sound condition and good working order and must not be modified in any way;

(ii) Approved 2-point lap seat belts are to be fitted to the rearward-facing outboard sitting positions;

(iii) All other sitting positions are to be fitted with seat belts required by Regulation 78A;

(iv) This exemption may be revoked at any time;

(v) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection.

Signed at Hamilton this 27th day of September 2000.
PAUL PATRICK CHAPMAN, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated the 3rd day of May 1999.

au7628

Transport (Vehicle Standards) Regulations 1990

Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990

Pursuant to Regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, John Ashley Gregg, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3.

Schedule 1
Vehicle details

Make: Jaguar
Model: E Type
Year: 1963
VIN/Chassis No.: 887567

Schedule 2
Exempted requirements
Regulation 29 (3); 29 (4) Seat belts

Schedule 3
Conditions

(i) The items specified in Schedule 2 must be in sound condition and good working order and must not be modified in any way;

(ii) Static three point lap and diagonal seat belts that comply with the appropriate Vehicle Standard are fitted in the rear outboard sitting positions.

(iii) All other sitting positions are fitted with seat belts required by Regulation 29;

(iv) This exemption may be revoked at any time;

(v) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection.

Signed at Christchurch this 12th day of October 2000.
JOHN ASHLEY GREGG, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 3 May 1999.

au7788

Maritime Safety Authority of New Zealand

Maritime Transport Act 1994

Maritime Rules—Notice of Exemption From Rule 21.13

I, Russell Paul Kilvington, Director of Maritime Safety, hereby give notice, pursuant to sections 47 (2) (a) and section 47 (2) (b) (iii) of the Maritime Transport Act 1994, as follows: