3610 NEW ZEALAND GAZETTE No. 153

(ii) (a) Approved two-point lap seat belts are fitted in the front outboard sitting positions;

(b) All other sitting positions are fitted with the seat belts required by regulation 78A;

(iii) This exemption may be revoked at any time;

(iv) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection.

Signed at Wellington this 9th day of October 1997.

TIMOTHY NEIL BULLOCK, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.

aw7259

Exemption From Specified Requirements of the Traffic Regulations 1976

Pursuant to regulation 90 (1) of the Traffic Regulations 1976, I, Timothy Neil Bullock, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Traffic Regulations 1976 listed in Schedule 2, subject to the conditions specified in Schedule 3.

Schedule 1

Vehicle Details

Make: Chevrolet
Model: Bel Air
Year of Manufacture: 1956
Chassis No.: VC560074223

Schedule 2

Exempted Requirements

Regulation 78 (1) (a) & (b): Front outboard seatbelts
Regulation 78A (a): Front outboard seatbelts

Schedule 3

Conditions

(i) All seat belts must be in sound condition and good working order and must not be modified in any way;

(ii) (a) Approved two-point lap seat belts are fitted in the front outboard sitting positions;

(b) All other sitting positions are fitted with the seat belts required by regulation 78A;

(iii) This exemption may be revoked at any time;

(iv) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection.

Signed at Wellington this 14th day of October 1997.

TIMOTHY NEIL BULLOCK, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.

aw7582

Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990

Pursuant to regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, Timothy Neil Bullock, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3.

Schedule 1

Vehicle Details

Make: Chevrolet
Model: Bel Air
Year of Manufacture: 1956
Chassis No.: VC560074223

Schedule 2

Exempted Requirements

Relating to:

Regulation 78 (1)(a) & (b): Front outboard seatbelts

Schedule 3

Conditions

(i) All seat belts must be in sound condition and good working order and must not be modified in any way;

(ii) (a) Approved two-point lap seat belts are fitted in the front outboard sitting positions;

(b) All other sitting positions are fitted with the seat belts required by regulation 78A;

(iii) This exemption may be revoked at any time;

(iv) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection.

Signed at Wellington this 8th day of October 1997.

TIMOTHY NEIL BULLOCK, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.

aw7254

Exemption From Specified Requirements of the Traffic Regulations 1976

Pursuant to regulation 90 (1) of the Traffic Regulations 1976, I, Timothy Neil Bullock, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Traffic Regulations 1976 listed in Schedule 2, subject to the conditions specified in Schedule 3.

Schedule 1

Vehicle Details

Make: Ford
Model: Mustang Notchback
Year of Manufacture: 1967
Chassis No.: 7R01A236965

Schedule 2

Exempted Requirements

Relating to:

Regulation 13 (8): Brakes
Regulation 17 (3): Rear reflectors
Regulation 20 (2): Direction-indicator lamps
Regulation 27: Windscreen wiping and washing

Regulation 28 (2): Rear-vision mirrors
Regulation 29 (4): Seat belts
Regulation 30 (2): Seat belt anchorages
Regulation 32 (3): Door locks and hinges
Regulation 33 (3): Steering
Regulation 34 (1), (3): Interior fittings

Schedule 3

Conditions

(i) The items specified in Schedule 2 (except for seat belts and seat belt anchorages) must be within the vehicle manufacturer's specifications;

(ii) The items specified in Schedule 2 must be in sound condition and good working order and must not be modified in any way;

(iii) All seat belts must be securely anchored to the vehicle and seat belt anchorages that are not the vehicle manufacturer's original equipment must comply with Specification St 120395;

(iv) This exemption may be revoked at any time;

(v) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection.

Signed at Wellington this 8th day of October 1997.

TIMOTHY NEIL BULLOCK, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.

aw7254

Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990

Pursuant to regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, Timothy Neil Bullock, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3.

Schedule 1

Vehicle Details

Make: Chevrolet
Model: Corvette
Year of Manufacture: 1968
Chassis No.: 1943785428132

Schedule 2

Exempted Requirements

Relating to:

Regulation 13 (8): Brakes
Regulation 17 (3): Rear reflectors