662 THE NEW ZEALAND GAZETTE No. 24

Vesting a Reserve in the Inglewood County Council

PURSUANT to the Reserves Act 1977, and to a delegation from the Minister of Lands, the Assistant Commissioner of Crown Lands hereby vests the reserve, described in the Schedule hereto, in the Inglewood County Council in trust for recreation purposes.

SCHEDULE

TARANAKI LAND DISTRICT—INGLEWOOD COUNTY

4.9372 hectares, more or less, being Sections 1, 2, 58 and 59, Tarata Village, situated in Block III, Huiroa Survey District. All New Zealand Gazette, 1979, page 2175. S.O. Plans 455 and 8967.

Dated at New Plymouth this 19th day of February 1982.

R. LANCASTER,
Assistant Commissioner of Crown Lands.

(L. and S. H.O. Res. 6/2/62; D.O. 8/1/34)

Revocation of Appointment to Control and Manage a Reserve

PURSUANT to the Reserves Act 1977, and to a delegation from the Minister of Lands, the Assistant Commissioner of Crown Lands hereby revokes the appointment of the Tarata Domain Reserves Board to control and manage the reserve for recreation purposes, described in the Schedule hereto.

SCHEDULE

TARANAKI LAND DISTRICT—INGLEWOOD COUNTY

4.9372 hectares, more or less, being Sections 1, 2, 58 and 59, Tarata Village, situated in Block III, Huiroa Survey District. All New Zealand Gazette, 1979, page 2175. S.O. Plans 455 and 8967.

Dated at New Plymouth this 19th day of February 1982.

R. LANCASTER,
Assistant Commissioner of Crown Lands.

(L. and S. H.O. Res. 6/2/62; D.O. 8/1/34)

Reservation of Land

PURSUANT to the Land Act 1948, and to a delegation from the Minister of Lands, the Assistant Director of Land Administration of the Department of Lands and Survey hereby sets apart the land, described in the Schedule hereto, as a reserve for scientific purposes.

SCHEDULE

MARLBOROUGH LAND DISTRICT—MARLBOROUGH COUNTY

4.644 hectares, more or less, being Section 17, Block XI, Clifford Bay Survey District. S.O. Plan 5956.

Dated at Wellington this 24th day of February 1982.

W. J. F. BISHOP,
Assistant Director of Land Administration,
of the Department of Lands and Survey.

(L. and S. H.O. Res. 8/7/2; D.O. LG 80, 8/5/299)

Classification of Reserve

PURSUANT to the Reserves Act 1977, and to a delegation from the Minister of Lands, the Assistant Commissioner of Crown Lands hereby declares the reserve, described in the Schedule hereto, to be classified as a reserve for recreation purposes, subject to the provisions of the said Act.

SCHEDULE

WELLINGTON LAND DISTRICT—WAIMARINO COUNTY

4.4515 hectares, more or less, being Section 21, Block XIII, Mangamuti Survey District. Part New Zealand Gazette, 1899, page 1311. S.O. Plan 14051.

Dated at Wellington this 12th day of February 1982.

C. A. McILROY,
Assistant Commissioner of Crown Lands.

(L. and S. H.O. Res. 7/2/362; D.O. 8/5/178)

Transfer of Unformed Legal Road in Block VIII, Umutoi Survey District, Pohangina County

PURSUANT to section 323, Local Government Act 1974, and to a delegation from the Minister of Lands, the Deputy Commissioner of Crown Lands hereby declares that the land, described in the Schedule hereto, has been transferred to the Crown by the Pohangina County Council pursuant to the said Section 323 and on the publication of this notice the land shall be deemed to be Crown land subject to the Land Act 1948.

SCHEDULE

WELLINGTON LAND DISTRICT—POHANGINA COUNTY

3.8540 hectares, more or less, being unformed legal road adjoining Section 2, Block VIII, Umutoi Survey District, as marked A on S.O. Plan 33138.

2.5340 hectares, more or less, being unformed legal road adjoining Sections 5, 6 and 7, Block VIII, Umutoi Survey District, as marked A on S.O. Plan 33139.

Dated at Wellington this 12th day of February 1982.

C. A. McILROY,
Deputy Commissioner of Crown Lands.

(L. and S. H.O. 16/3292; D.O. CL 33/27)

Timber Preservation Regulations 1955—Branding and Identification of Preservative Treated Timber

PURSUANT to regulation 12 of the Timber Preservation Regulations 1955*, the Timber Preservation Authority hereby gives notice that, subject to the exemptions provided herein, timber which has been preservative treated as provided in the said regulations shall be legibly branded or identified in the manner herein described.

1. Definitions—For the purpose of these regulations, the following definitions shall apply:

1.1 Brand—Means a legible mark placed on preservative treated timber containing the registered number of the plant allocated by the authority and a further mark to identify the TPA Commodity Specification to which the timber has been treated. Such brand shall be in block letters not less than 10 mm high and numerals and letters shall be displayed in the Arabic style. As an example, materials treated to Commodity Specification C3 at plant number 700 will be branded

700 C3
or
C3 700

Exceptions to this clause are detailed in clauses 1.4 (Surface Brand), 1.6 (Packet Brand), 1.7 (Disc Brand), and 2.1.3 below.

1.2 Burn Brand—Means method of applying a brand to timber by means of heated branding irons. Letters shall be not less than 10 mm in height.

1.3 End Brand—Means the position of application of a brand as described in clause 1.1 above. This shall be on or within 150 mm of the end of the piece of sawn timber or roundwood.

1.4 Surface Brand—Means a brand placed on the face, bank, or edge of machined treated timber by incising or branding with a permanent ink approved by the authority. Such brand will be in letters not less than 10 mm high and shall embody the words “TREATED” together with, as a minimum, the number or trade name approved by the authority for the organisation performing the branding and may include the type of treatment and other information. Face brand has a corresponding meaning.

1.4.1 Repetitive Surface Brand—Means a surface brand as defined in clause 1.4 above. The brand must repeat at not more than 600 mm centres.

1.5 Incised Brand—Means a surface brand impressed on to machined timber as described in clause 1.4.1 above.

1.6 Packet Brand—Means a weather resistant, legible brand placed on each side and the top of a pocket of treated timber as detailed in clause 1.1 except that letters shall be not less than 20 mm in height. “Packet” for the purpose of this clause means a made up bundle of timber for subsequent handling as a single unit.

1.7 Disc Brand—Means a metal disc, or other approved material recessed so that the crown shall be not less than 2 mm from the surface of a pole and centred 3 m from the butt end. The disc shall be 50 mm in diameter and shall contain as a minimum information in the manner as described in clause 1.1.