12 MAY
THE NEW ZEALAND GAZETTE
1399

“Prepaid” means paid (to an officer authorised by the Board to receive parking fees) before entering a parking place or within 5 minutes after doing so:
“Season” means the winter holiday period:
“Vehicle” has the meaning given to it by section 2 of the National Parks Act 1952:
“Winter holiday period” means the period from 1 June to 31 October in every year or if the Board so resolves any lesser period or periods within the said period.

3. For the use of any parking place on every day during the winter holiday period the driver of every vehicle shall on the day of such use pay a parking fee to an officer in the manner directed by the Board.

4. The parking fee payable in respect of every vehicle shall be as follows:
   (a) For every passenger-service vehicle as defined in the Transport Act 1962 (except a motorcar as defined in the same act) $2 per day or part of a day for the use of a parking place in the Whakapapa Village or alternatively $20 for the season, and $5 per day or part of a day for the use of any other parking place adjacent to State Highway 48, or alternatively $50 for the season.
   (b) For every other vehicle:
   (i) $5 per day or part of a day reducible to $1 per day or part of a day in the Board’s discretion if the fee is prepaid, or alternatively;
   (ii) $10 for the season.

5. (a) Every person paying a daily parking fee of $1 per day or part of a day shall be issued with a wind-screen sticker or other form of receipt.
   (b) Every person paying the parking fee of $10 for the season shall be issued with a season ticket which may be used in respect of any vehicle which shall while such season ticket is properly displayed be exempted from payment of any other parking fees during the season in respect of which the season ticket has been issued.

6. The windscreen sticker or other form of receipt or season ticket as the case requires shall at all times while the vehicle is in any parking place be displayed so that it is visible from the front of the vehicle and no other proof of the payment of the parking fee shall be acceptable or required.

7. The driver of any vehicle in a parking place shall park it in such a way that it will not obstruct the egress of any vehicle already parked in the parking place and also in accordance with any directions given by an officer who is present.

8. The driver of a passenger-service vehicle shall not park the vehicle in any part of the Iwikau or Whakapapa Villages in the Tongariro National Park except in a parking place designated as being for the parking of such vehicles.

9. For the purposes of the loading and unloading of passengers and goods a vehicle shall be entitled to stop or stand for not longer than 5 minutes in an area in which the parking of vehicles is prohibited but which the Board has designated by signs as a loading area.

10. On being informed of any breach of these bylaws alleged to have been committed by a driver of a vehicle and on being requested so to do by the Board or an officer whether orally or in writing the owner of that vehicle and also in the case of a vehicle let on hire the person to whom it is let on hire shall within 14 days after the receipt of the request give to the Board all information in his possession or obtainable by him which may lead to the identification of the driver.

11. Bylaws 9 and 10 of the Tongariro National Park Board Bylaws 1974 are hereby revoked.

The foregoing bylaw was made by resolution of the Board at a meeting held at Mount Ruapehu on 26 November 1976.

J. S. MACLEAN, Chairman.
M. C. BRITTON, Secretary.

The foregoing bylaw of the Tongariro National Park Board was approved by the National Parks Authority at a meeting at Wellington on 23 and 24 March 1977.

P. H. C. LUCAS, Deputy Chairman.

(L. and S. H.O. N.P. 1/1/5; D.O. TNP 22/1 and TNP 31/1)

Indecent Publications Tribunal

I, Gordon Stewart Orr, Secretary for Justice, Wellington, give notice that I have applied to the Indecent Publications Tribunal for a decision as to whether the books, described below, are indecent or not, or for decisions as to their classification:

Forum (New Zealand Edition) Vol. 4, No. 8, 9, and 10, being the January, February, and March 1977 issues. Published by Seven Seas Publishing Pty. Ltd.

(Adm. 2/39/4 (6))

The Standards Act 1965—Specifications Declared to be Standard Specifications

PURSUANT to section 23 of the Standards Act 1965, the Standards Council, on 31 March 1977, declared the under-mentioned specifications to be standard specifications:

Number, Title, and Price of Specification (Post Free)
NZS 3605:1977 Load bearing round timber piles and poles. Metric units. $2.80.
NZS 8601:1977 (BS 4472:1969) Protective skull caps for jockeys. Metric and imperial units. (Including Amendment A) $3.70.

Copies of the standard specifications may be ordered from the Standards Association of New Zealand, World Trade Center, 15-23 Sturdee Street (or Private Bag), Wellington.

Dated at Wellington this 22nd day of April 1977.

DENYS R. M. PINFOLD,
Director, Standards Association of New Zealand.

(S.A.—114/2/2:606-607)

The Standards Act 1965—Overseas Specifications Endorsed as Suitable for Use in New Zealand

PURSUANT to section 17 of the Standards Act 1965, the Standards Council, on 22 April 1977, endorsed the under-mentioned overseas specifications as suitable for use in New Zealand.

Number and Title of Specification
Price of Copy (Post Free)
$

British Standards.
BS 122:— Milling cutters and reamers—
Part 4: 1975 Screwed shank end mills, slot drills and tee slot cutters. Metric units. ……
6.25
BS 1054:1975 Engineers’ comparators for external measurement. Metric units. ……
6.25
BS 1157:1975 Tapping drill sizes for use with fluted taps. Metric and imperial units. ……
10.85
BS 1414:1975 Steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petro-chemical and allied industries. Metric units. ……
10.85
BS 1435:1975 Rubber hose assemblies for oil suction and discharge services. Metric units. ……
10.85
BS 1873:1975 Steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries. Metric units.
15.25
BS 1919:1974 Hacksaw blades. Metric units.
10.85
BS 1943:1975 Woodworking chisels and gouges. Metric units.
8.30
BS 2594:1975 Carbon steel welded horizontal cylindrical storage tanks. Metric and imperial units.
10.85
BS 3037:— Tyres for crane rail wheels—
Part 2: 1975 Forged or rolled steel double flanged rail wheels and tyres. (Metric units). ……
6.25
BS 3650:1976 Oil-extended styrene-butadiene rubbers (SBR). Non-pigmented, emulsion polymerized, general purpose types (1700 series). ……
3.70
BS 4221:1973 Spiral/braid wire reinforced rubber hose and hose assemblies fitted with end couplings. Metric units. ……
8.30
BS 4361:— Woodworking machines—
Part 2: Accuracy tests—
Section 13: 1974 Turning lathes. Metric units. ……
3.70
BS 4656:— The accuracy of machine tools and methods of test—
Part 10: 1975 Drilling machines, radial type. Metric units. ……
8.30
BS 5118:1975 Rubber air hose. Metric and imperial units. ……
6.25
BS 5119:1975 Low pressure rubber water hose. Metric and imperial units. ……
6.25
BS 5120:1975 Rubber hose for gas welding and allied processes. Metric and imperial units. ……
6.25