2292

THE NEW ZEALAND GAZETTE

No. 87

The Standards Act 1965--Standard Specifications Proposed for Revocation

NOTICE is hereby given that the New Zealand standard specifications, listed in the Schedule hereto, have been reviewed by committees of the Standards Council and have been recommended for revocation, pursuant to the provisions of the Standards Act 1965.

Any person who may be affected by the proposal to revoke these standard specifications, and who wishes to object to their revocation, is invited to submit comments to the Standards Association of New Zealand, Private Bag, Wellington, not later than 7 November 1975.

SCHEDULE

Number and Title of Standard Specification

NZS 936-51:1951 (AS O 10 to O 45-1948) Grading rules for Jarrah, Karri and Wandoo.

NOTE-The Standards Council proposes to endorse as suitable for use in New Zealand other Australian standards more recently published, which are advertised elsewhere in this issue of the Gazette.

Dated at Wellington this 7th day of October 1975.

G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 114/2/6)

The Standards Act 1965--Overseas Specifications Available for Comment

PURSUANT to subsection (3) of section 23 of the Standards Act 1965, notice is hereby given that the under-mentioned specifications are being considered for declaration as New Zealand standard specifications or for endorsement as suitable for use in New Zealand.

Number and Title of Specification
Australian Standard
AS O 83:1963 Sawn South-Eastern Australian Eucalypt hardwoods.
AS 1483:1973 Structural timbers from Western Australian hardwoods. Metric units.

All persons who may be affected by these specifications and who desire to comment thereon may obtain copies from the Standards Association of New Zealand, World Trade Center, 15-23 Sturdee Street (or Private Bag), Wellington, price 50c a copy each (mailed).

The closing date for the receipt of comment is 7 November 1975.

Dated at Wellington this 7th day of October 1975.

G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 114/2/8)

The Standards Act 1965--Draft New Zealand Standard Specifications Available for Comment

PURSUANT to subsection (3) of section 23 of the Standards Act 1965, notice is hereby given that the following draft New Zealand standard specifications are being circulated:

Number and Title of Specifications

DZ GP 54 Zinc chrome fire retardant priming paint for use on aluminium, aluminium alloys, and steel under marine conditions (GSB 1973/119).
DZ GP 55 Flat latex type paint for use on interior-exterior absorbent surfaces (GSB 1973/125)
DZ GP 56 Undercoat for use with gloss alkyd paint on exterior woodwork (GSB 1973/122)
DZ GP 57 Gloss alkyd paint for finishing coats on exterior woodwork (GSB 1973/121).

All persons who may be affected by these specifications and who may desire to comment thereon may obtain copies from the Standards Association of New Zealand, World Trade Center, 15-23 Sturdee Street (or Private Bag), Wellington, price 50c a copy (mailed).

The closing date for the receipt of comment is 7 November 1975.

Dated at Wellington this 9th day of October 1975.

G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 3-114/2/8)

The Standards Act 1965--Standard Specifications Proposed for Revocation

NOTICE is hereby given that the New Zealand standard specifications, listed in the Schedule hereto, have been reviewed by committees of the Standards Council and have been recommended for revocation, pursuant to the provisions of the Standards Act 1965.

Any person who may be affected by the proposal to revoke these standard specifications, and who wishes to object to their revocation is invited to submit comments to the Standards Association of New Zealand, Private Bag, Wellington not later than 7 November 1975.

SCHEDULE

Number and Title of Specification
NZS 31:1964 (BS 251:1963) Naval brass rods, sections, forging stock and forgings.
NZS 32:1964 (BS 252:1963) Naval brass (special mixture) rods and sections (other than forging stock).
NZS 49:1964 (BS 249:1963) Leaded brass (58 percent copper, 3 percent lead) rods and sections (other than forging stock).
NZS 421:1964 (BS 384:1963) Phosphor-bronze (copper-tin-phosphorus) wire.
†NZS 669:1965 (BS 1224:1965) Electroplated coatings of nickel and chromium.
NZS 746:1950 (BS 1367:1947) Code of procedure in inspection of copper base alloy sand castings.
NZS 825:1962 (BS 1400:1961) Schedule of copper alloy ingots and copper and copper alloy castings.
NZS 835:1967 (BS 1569:1965) Copper sheet and strip for roofing and other building purposes.
†NZS 847:1957 (BS 1004:1955) Zinc alloys for die casting and zinc alloy die castings.
NZS 858:1964 (BS 1541:1963) Rolled copper and copper alloy plate for heat exchanger and condenser tube plates.
NZS 870:1967 (BS 1615:1961) Anodic oxidation coatings on aluminium.
NZS 881:1964 (BS 369:1963) 5 percent phosphor bronze (copper-tin-phosphorus) rods and sections (other than forging stock).
NZS 916:1951 Electro-deposited metal coatings of copper, tin, and lead.
NZS 1053:1952 Lead pipes (for other than chemical purposes).
NZS 1149:1953 (BS 1867:1952) Solid drawn aluminium bronze tubes for general purposes (7 percent aluminium).
NZS 1179:1964 (BS 1949:1963) 60/40 brass rods, sections, forging stock, and forgings.
NZS 1232:1954 (BS 2027:1953) Copper plates for general purposes.
NZS 1418:1964 (BS 1470:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Sheet and strip.
NZS 1419:1964 (BS 1471:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Drawn tube.
NZS 1420:1964 (BS 1472:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Forging stock and forgings.
NZS 1421:1964 (BS 1473:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Rivet, bolt, and screw stock for forging.
NZS 1422:1964 (BS 1474:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Extruded round tube and hollow sections.
NZS 1424:1964 (BS 1476:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Bars and sections.
NZS 1425:1964 (BS 1477:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Plate.
NZS 1569:1964 (BS 2870:1962) Schedule of rolled copper and copper alloys. Sheet, strip, and foil.
NZS 1697:1962 (BS 1001:1960) High tensile brass forging stock and forgings.
NZS 1805:1963 (BS 2614:1959) Aluminium alloy sections for marine purposes.
NZS 1835:1963 (BS 2872:1962) Schedule of copper and copper alloys. Forging stock and forgings.
NZS 1836:1963 (BS 2874:1962) Schedule of copper and copper alloys. Rods and sections (other than forging stock).
NZS 1901:1964 (BS 1948:1963) Copper-silicon rods, sections, forging stock, and forgings.
*NZS 1902:1964 (BS 2873:1963) Schedule of copper and copper alloys. Wire.