126
THE NEW ZEALAND GAZETTE
No. 5

(5) The basis price shall cover lengths from 16 ft to 35 ft.

(6) The basis price shall cover the following quantities:

Rounds, 5 tonnes and over
Squares, 5 tonnes and over
Flats, 5 tonnes and over
Angles, 5 tonnes and over

} In one size and gauge or
diameter and in one quality

(7) The basis price shall cover the cold straightening of angles.

EXTRAS

6. The maximum charges for extras as appropriate are as follows:

(1) Size (added to Basis Price)

Rounds—
Reinforcing and engineering:

Per Tonne
$ c

1/4" .. .. .. .. .. 10 75
3/8" .. .. .. .. .. 8 00
1/2" .. .. .. .. .. 4 00
5/8" .. .. .. .. .. 1 00
Squares, 3/8" .. .. .. .. .. 3 50

Flats—

1" × 3/16" .. .. .. .. .. 7 00
1" × 1/4" .. .. .. .. .. 5 00
1" × 5/16" .. .. .. .. .. 5 00
1" × 3/8" .. .. .. .. .. 4 00
1" × 7/16" .. .. .. .. .. 4 00
1" × 1/2" .. .. .. .. .. 4 00
1 1/4" × 3/16" .. .. .. .. .. 7 00
1 1/4" × 1/4" .. .. .. .. .. 5 00
1 1/4" × 5/16" .. .. .. .. .. 5 00
1 1/4" × 3/8" .. .. .. .. .. 4 00
1 1/4" × 7/16" .. .. .. .. .. 4 00
1 1/4" × 1/2" .. .. .. .. .. 4 00
1 1/2" × 3/16" .. .. .. .. .. 6 00
1 1/2" × 1/4" .. .. .. .. .. 4 00
1 1/2" × 5/16" .. .. .. .. .. 4 00
1 1/2" × 3/8" .. .. .. .. .. 4 00
1 1/2" × 7/16" .. .. .. .. .. 4 00
1 1/2" × 1/2" .. .. .. .. .. 2 00
1 3/4" × 3/16" .. .. .. .. .. 6 00
1 3/4" × 1/4" .. .. .. .. .. 4 00
1 3/4" × 5/16" .. .. .. .. .. 4 00
1 3/4" × 3/8" .. .. .. .. .. 4 00
1 3/4" × 7/16" .. .. .. .. .. 4 00
1 3/4" × 1/2" .. .. .. .. .. 2 00
2" × 1/4" .. .. .. .. .. 4 00
2" × 5/16" .. .. .. .. .. 4 00
2" × 3/8" .. .. .. .. .. 2 00
2" × 7/16" .. .. .. .. .. 2 00
2 1/2" × 1/4" .. .. .. .. .. 4 00
2 1/2" × 5/16" .. .. .. .. .. 4 00
2 1/2" × 3/8" .. .. .. .. .. 2 00
3" × 1/4" .. .. .. .. .. 3 00
3" × 5/16" .. .. .. .. .. 3 00
3 1/2" × 1/4" .. .. .. .. .. 3 00
3 1/2" × 5/16" .. .. .. .. .. 3 00
4" × 1/4" .. .. .. .. .. 3 00
4" × 5/16" .. .. .. .. .. 3 00
4" × 3/8" .. .. .. .. .. 1 00
4" × 1/2" .. .. .. .. .. 1 00

Angles—

1" × 1" × 3/16" .. .. .. .. .. 10 00
1" × 1" × 1/4" .. .. .. .. .. 8 00
1 1/4" × 1 1/4" × 3/16" .. .. .. .. .. 7 00
1 1/4" × 1 1/4" × 1/4" .. .. .. .. .. 6 00
1 1/2" × 1 1/2" × 3/16" .. .. .. .. .. 4 00
1 1/2" × 1 1/2" × 1/4" .. .. .. .. .. 2 00
2" × 2" × 3/16" .. .. .. .. .. 2 00

Channels—

3" × 1 1/4" .. .. .. .. .. 8 00
4" × 2" .. .. .. .. .. 6 00
5" × 2 1/2" .. .. .. .. .. 3 00
6" × 3" .. .. .. .. .. 3 00

Each of the following extras may be added to basis price plus appropriate size extras.

(2) Quantity

Per Tonne
$ c

1 tonne to under 2 tonnes .. .. .. 6 00
2 tonnes to under 3 tonnes .. .. .. 4 00
3 tonnes to under 4 tonnes .. .. .. 2 00
4 tonnes to under 5 tonnes .. .. .. 1 00
Minimum order, 1 tonne.

The above quantity extras apply to items of one size, quality, and length.

Where quantities under 10 tonnes of an item incur any extra freight, cartage, or other charges, such charges are to customer’s account.

(3) Length

Per Tonne
$ c

Over 35' to 40' .. .. .. .. .. 1 00
Over 40' to 50' .. .. .. .. .. 1 50

(4) Cold Straightening

Flats only .. .. .. .. .. 1 00

(5) Deformed Bars .. .. .. .. .. 4 00

(6) Bar marking HY. 60 .. .. .. .. .. 4 50

(7) Quality

This section includes quality extras added to basis price, plus any extras added under 6 (1, 2, 3, 4, and 5) above.

Standard Specifications

Specification Analysis Per Tonne Extra
$ c

NZSS 1693 .. Sulphur .06 max. Phosphorus .06 max. 1 00
NZSS 3423P: Sulphur .06 max. Phosphorus .06 max. Basis price
Mild
Medium Tensile 33/38 Sulphur .06 max. Phosphorus .06 max. 1 50
tons p.s.i.
High Tensile Sulphur .06 max. Phosphorus .06 max. 1 50
37/43 tonnes p.s.i.
NZSS 4360 .. Sulphur .06 max. Phosphorus .06 max. Basis price
NZSS 1879.. High Yield Steel .. .. 7 75

(8) Tests

Per Tonne Extra
$ c

Government inspection .. .. .. 1 00
To Lloyds, etc. .. .. .. 1 50
By buyer at supplier’s works .. .. .. 8 00

lump sum per test or set of tests or 20c per tonne whichever is the greater

Surface inspection .. .. .. .. .. 2 00
Proof stress .. .. .. .. .. 3 00
Additional chemical analysis .. .. .. 3 00
Impact .. .. .. .. .. 3 50
Brinell on not less than 10 percent of the bars 7 50
Inspection or testing of lots less than 1 tonne .. 75

lump sum per test

Where test certificates are called for giving mechanical properties covering any of the numerical series of steels .. .. .. .. .. 1 00

(9) Special Paint Marking or Hand Stamping 1 00

(10) Cutting Margin

The standard cutting margin is —0" + 2" and is covered in the basis price.

(11) Extras for exact lengths are by arrangement between buyer and seller.

Dated at Wellington this 24th day of January 1973.

The seal of the Price Tribunal was affixed in the presence of:

[L.S.] A. G. RODDA, President.
F. F. SIMMONS, Member.

(I. and C.)

Gazette, 28 September 1972 (supplementary)

—

Authorised Insurers Under Part III of the Workers’ Compensation Act 1956

—

PURSUANT to section 101 of the Workers’ Compensation Act 1956, I hereby notify that, in addition to the State Insurance General Manager, constituted under the State Insurance Act 1963, the following insurance companies are authorised insurers under Part III of the Workers’ Compensation Act 1956:

A.A. Mutual Insurance Group.
Albion Insurance Co. Ltd.
Alliance Assurance Co. Ltd.
American Home Assurance Co.
Atlas Assurance Co. Ltd.
Australian Alliance Assurance Co. Ltd.