9 NOVEMBER
THE NEW ZEALAND GAZETTE
2435

Number and Title of Specification
Price
of Copy
$

BS 1474: 1972 Wrought aluminium and aluminium
alloys for general engineering purposes. Bars,
extruded round tube and sections. Metric units
5.00
BS 1740: — Wrought steel pipe fittings (screwed
BSP thread)—
Part 1: 1971 Metric units ....
3.30
Part 2: 1971 Imperial units ....
3.30
BS 1845: 1966 Filler metals for brazing. Metric
units (including Amendments No. 1 (PD 6201)
gratis; No. 2 (AMD 143) gratis; No. 3 (AMD
778) 80c) ....
1.90
BS 2782: 1970 Methods of testing plastics. Metric
units, (including Amendment No. 1 (AMD
936) 40c) ....
21.60
BS 3351: 1971 Piping systems for petroleum re-
fineries and petrochemical plants. Metric units
7.30
BS 3587: 1963 Calcium chloride (technical). Metric
units, (including Amendment No. 1 (AMD 954)
40c) ....
1.50
BS 4021: 1971 Flexible polyurethane foam sheeting
for use in laminates. Metric units ....
1.10
BS 4165: 1971 Electrodes wires and fluxes for the
submerged arc welding of carbon steel and
medium-tensile steel. Metric units ....
3.30
BS 4666: 1971 Inks for offset three-or-four colour
printing (British and European common stan-
dard). Metric units ....
2.65

Australian Standards
AS 1102: — Graphical symbols for electro-
technology—
Part 9: 1971 Logic symbols ....
2.40

Copies of the specifications are obtainable through the
Standards Association of New Zealand, World Trade Center,
15–23, Sturdee Street (or Private Bag), Wellington 1. An
additional 20c service charge is made on all mail orders.

Dated at Wellington, this 24th day of October 1972.
T. S. WARD, Deputy to the Director,
Standards Association of New Zealand.
(S.A. 5–114/2/9: 996–1016)

The Standards Act 1965—Endorsement of Amendments to
Overseas Specifications

Pursuant to section 17 of the Standards Act 1965, the
Standards Council, on 20 October 1972, endorsed as suitable
for use in New Zealand the under-mentioned amendments to
the relevant endorsed overseas specifications:

Number, Title, and Price of Specification
Amendment
No./AMD
BS 4518: 1969 Metric dimensions of toroidal
sealing rings and their housings. (O-rings.)
Metric units. $2.70
2/777 (40c)
BS 6360: 1969 Copper conductors in insulated
cables and cords. Metric units. $2.20
1/921 (40c)

Copies of the specifications so amended are obtainable from
the Standards Association of New Zealand, World Trade
Center, 15–23, Sturdee Street (or Private Bag), Wellington.
An additional 20c service charge is made on all mail orders.

Dated at Wellington this 24th day of October 1972.
T. S. WARD, Deputy to the Director,
Standards Association of New Zealand.
(S.A. 6–114/2/10: E 354–55)

The Standards Act 1965—Draft Amendment to New Zealand
Standard Specification Available for Comment

Pursuant to subsection (3) of section 23 of the Standards
Act 1965, notice is hereby given that the following draft
amendment is being circulated:

Number and Description of Draft
DZ 1900.7/306 Draft amendment to NZS 1900: — Model
building bylaw—Chapter 7: 1964, Small chimneys and
appliance installation.

NOTE—Amendment B to NZS 196 permits the use of
appropriate metric-dimension sieves to BS 410: 1969 or of
imperial-dimension sieves to suitable U.S. specifications.

When issued, this amendment to NZS 1900, Chapter 7
will remove specific reference to NZS 196, and will specify
the acceptable metric alternative to the specified sieve size.

All persons who may be affected by this amendment and
who desire to comment thereon, may, upon application, obtain
copies on loan from the Standards Association of New Zea-
land, World Trade Center, 15–23 Sturdee Street (or Private
Bag), Wellington 1.

The closing date for the receipt of comment is 30 November
1972.

Dated at Wellington this 27th day of October 1972.
T. S. WARD, Deputy to the Director,
Standards Association of New Zealand.
(S.A. 7–114/2/8)

The Standards Act 1965—British Standard Available for
Comment

Pursuant to subsection (3) of section 23 of the Standards
Act 1965, notice is hereby given that the under-mentioned
British standard is being considered for adoption as a New
Zealand standard specification:

Number and Title of Standard: BS 919: — Screw gauge
limits and tolerances—
Part 2: 1971 Gauges for screw threads of Whitworth and
BA forms.

All persons who may be affected by this standard and
who desire to comment thereon, may, on application, obtain
a copy on loan from the Standards Association of New
Zealand, World Trade Center, 15–23 Sturdee Street (or Private
Bag), Wellington.

Requests should specify that copies are required for
comment purposes.

The closing date for the receipt of comment is 30 November
1972.

Dated at Wellington this 27th day of October 1972.
T. S. WARD, Deputy to the Director,
Standards Association of New Zealand.
(S.A. 8–114/2/1)

Temporary Protection of Industry

Notice is hereby given that an application has been received
for temporary protection, in terms of the Tariff and Develop-
ment Board Act 1961 and its amendments, for the following
goods:

Tariff Heading
Goods
Ex 51.04.069
Woven fabrics made from bulked con-
tinuous filament synthetic yarns, weigh-
ing not less than 5 oz per square yard.

Dated at Wellington this 19th day of October 1972.
J. A. KEAN, Comptroller of Customs.

Temporary Protection of Industry

Notice is hereby given that an application has been received for
temporary protection, in terms of the Tariff and Development
Board Act 1961 and its amendments, for the following goods:

Tariff Item
Goods
Ex 83.01.019
Cylinder Rim Night Latches

Dated at Wellington this 19th day of October 1972.
J. A. KEAN, Comptroller of Customs.

Decisions Under the Sales Tax Act 1932–33—Notice No. 63

Decisions in Interpretation of the Sales Tax Act, notified
in the New Zealand Gazette of 30 April 1970, No. 25, are
amended as follows:

Minister’s Decision 1.E (f) is cancelled and replaced by
the following:

(f) (i) The building and fitting of bodies to commercial
trucks or delivery vans,
(ii) The fabrication of body panels for commercial
trucks or delivery vans.