6 JULY

(5) The basis price shall cover lengths from 16 ft to 35 ft.
(6) The basis price shall cover the following quantities:

Rounds, 5 tons and over } In one size and gauge or
Squares, 5 tons and over } diameter and in one
Flats, 5 tons and over } quality
Angles, 5 tons and over }

(7) The basis price shall cover the cold straightening of angles.

EXTRAS

6. The maximum charges for extras as appropriate are as follows :

(1) Size (added to Basis Price)

Rounds—

Reinforcing and engineering:

1∕4" ... ... ... ... ... ... ... 10 75
3∕8" ... ... ... ... ... ... 8 00
1∕2" ... ... ... ... ... ... 4 00
5∕8" ... ... ... ... ... ... 1 00

Squares, 3∕8" ... ... ... ... ... ... 3 50

Flats—

1" × 3∕16" ... ... ... ... ... 7 00
1" × 1∕4" ... ... ... ... ... 5 00
1" × 5∕16" ... ... ... ... ... 5 00
1" × 3∕8" ... ... ... ... ... 4 00
1" × 7∕16" ... ... ... ... ... 4 00
1" × 1∕2" ... ... ... ... ... 4 00
11∕4" × 3∕16" ... ... ... ... ... 7 00
11∕4" × 1∕4" ... ... ... ... ... 5 00
11∕4" × 5∕16" ... ... ... ... ... 5 00
11∕4" × 3∕8" ... ... ... ... ... 4 00
11∕4" × 7∕16" ... ... ... ... ... 4 00
11∕4" × 1∕2" ... ... ... ... ... 4 00
11∕2" × 3∕16" ... ... ... ... ... 6 00
11∕2" × 1∕4" ... ... ... ... ... 4 00
11∕2" × 5∕16" ... ... ... ... ... 4 00
11∕2" × 3∕8" ... ... ... ... ... 4 00
11∕2" × 7∕16" ... ... ... ... ... 4 00
11∕2" × 1∕2" ... ... ... ... ... 2 00
13∕4" × 3∕16" ... ... ... ... ... 6 00
13∕4" × 1∕4" ... ... ... ... ... 4 00
13∕4" × 5∕16" ... ... ... ... ... 4 00
13∕4" × 3∕8" ... ... ... ... ... 4 00
13∕4" × 7∕16" ... ... ... ... ... 4 00
13∕4" × 1∕2" ... ... ... ... ... 2 00
2" × 1∕4" ... ... ... ... ... 4 00
2" × 5∕16" ... ... ... ... ... 4 00
2" × 3∕8" ... ... ... ... ... 2 00
2" × 7∕16" ... ... ... ... ... 2 00
21∕2" × 1∕4" ... ... ... ... ... 4 00
21∕2" × 5∕16" ... ... ... ... ... 4 00
21∕2" × 3∕8" ... ... ... ... ... 2 00
3" × 1∕4" ... ... ... ... ... 3 00
3" × 5∕16" ... ... ... ... ... 3 00
31∕2" × 1∕4" ... ... ... ... ... 3 00
31∕2" × 5∕16" ... ... ... ... ... 3 00
4" × 1∕4" ... ... ... ... ... 3 00
4" × 5∕16" ... ... ... ... ... 3 00
4" × 3∕8" ... ... ... ... ... 1 00
4" × 1∕2" ... ... ... ... ... 1 00

Angles—

1" × 1" × 3∕16" ... ... ... ... ... 10 00
1" × 1" × 1∕4" ... ... ... ... ... 8 00
11∕4" × 11∕4" × 3∕16" ... ... ... ... ... 7 00
11∕4" × 11∕4" × 1∕4" ... ... ... ... ... 6 00
11∕2" × 11∕2" × 3∕16" ... ... ... ... ... 4 00
11∕2" × 11∕2" × 1∕4" ... ... ... ... ... 2 00
2" × 2" × 3∕16" ... ... ... ... ... 2 00

Channels—

3" × 11∕2" ... ... ... ... ... 10 00
4" × 2" ... ... ... ... ... 7 00

Each of the following extras may be added to basis price plus appropriate size extras.

(2) Quantity

Per Ton
$ c

1 ton to under 2 tons ... ... ... 6 00
2 tons to under 3 tons ... ... ... 4 00
3 tons to under 4 tons ... ... ... 2 00
4 tons to under 5 tons ... ... ... 1 00

Minimum order, 1 ton.

The above quantity extras apply to items of one size, quality, and length.

Where quantities under 10 tons of an item incur any extra freight, cartage, or other charges, such charges are to customer's account.

(3) Length

Per Ton
$ c

Over 35' to 40' ... ... ... ... 1 00
Over 40' to 50' ... ... ... ... 1 50

(4) Cold Straightening

Per Ton
$ c

Flats only ... ... ... ... ... 1 00

(5) Deformed Bars ... ... ... ... ... 4 00

(6) Bar marking HY. 60 ... ... ... ... ... 4 50

(7) Quality

This section includes quality extras added to basis price, plus any extras added under 6 (1, 2, 3, 4, and 5) above.

Standard Specifications

Specification Analysis Per Ton Extra
$ c

NZSS 1693 ... Sulphur .06 max. Phosphorus .06 max. ... ... ... ... ... 1 00

NZSS 197 ... Sulphur .06 max. Phosphorus .06 Mild max. ... ... ... ... ... Basis price

Medium Ten- Sulphur .06 max. Phosphorus .06 sile 33/38 max. ... ... ... ... ... 1 50

tons p.s.i.

High Tensile Sulphur .06 max. Phosphorus .06 37/43 tons max. ... ... ... ... ... 1 50

p.s.i.

NZSS 309 ... Sulphur .06 max. Phosphorus .06 max. ... ... ... ... ... Basis price

NZSS 1879 ... High Yield Steel ... ... ... ... ... 7 75

(8) Tests

Per Ton Extra
$ c

Government inspection ... ... ... ... ... 1 00
To Lloyds, etc. ... ... ... ... ... 1 50
By buyer at supplier's works ... ... ... ... ... 8 00
lump sum per test or set of tests or 20c per ton which-
ever is the greater

Surface inspection ... ... ... ... ... 2 00
Proof stress ... ... ... ... ... 3 00
Additional chemical analysis ... ... ... ... ... 3 00
Impact ... ... ... ... ... 3 50
Brinnell on not less than 10 percent of the bars ... ... ... ... ... 7 50
Inspection or testing of lots less than 1 ton ... ... ... ... ... 75
lump sum per test

Where test certificates are called for giving mechanical properties covering any of the numerical series of steels ... ... ... ... ... 1 00

(9) Special Paint Marking or Hand Stamping 1 00

(10) Cutting Margin

The standard cutting margin is -0" + 2" and is covered in the basis price.

(11) Extras for exact lengths are by arrangement between buyer and seller.

Dated at Wellington this 5th day of July 1972.

The seal of the Price Tribunal was affixed in the presence of:

[L.S.]
A. G. RODDA, President.
F. F. SIMMONS, Member.
(I. and C.)

Gazette, 27 January 1972, Vol. I, p. 172

Maori Land Development Notice

WHEREAS by virtue of the notice referred to in the First Schedule hereto the land described in that notice was declared to be subject to the provisions of Part XXIV of the Maori Affairs Act 1953; and whereas the appellation of the said land has been changed by a subsequent order of the Maori Land Court; and whereas it is desired to release that land from the provisions of the said Part XXIV:

Now, therefore, pursuant to section 332 of the Maori Affairs Act 1953, the Board of Maori Affairs hereby gives notice as follows.

NOTICE

1. This notice may be cited as Maori Land Development Notice Whangarei 1972, No. 27.

2. The notice referred to in the First Schedule hereto is hereby revoked.