1534
THE NEW ZEALAND GAZETTE
No. 57
Tariff Notice No. 1966/85—Approvals under Former Item 448 Revoked—continued
| Goods approved under Item 448 of the Former Tariff | Tariff Notice No. | Gazette No. |
|---|---|---|
| Sponges, potters', in natural fibre, of approved qualities, declared by a manufacturer for use by him only at his works in making pottery | 1966/47 | 38, 23 June 1966, p. 1002 |
| Sporting requisites—Bolts, screwed, hinged, and sleeve bolts, for making racquet presses | 1966/47 | 38, 23 June 1966, p. 1002 |
| Face pieces or inserts for golf-club heads | 1966/47 | 38, 23 June 1966, p. 1002 |
| Forgings and castings, steel in the rough, specially suited for making golf club heads (steel heads are to be regarded as in the rough if, after forging and casting, they are merely roughly ground to remove the fin produced between the half moulds in drop forgings or castings, or to remove the indentations of the hammer produced in hand forgings. The heads must not be further worked, except that a pilot hole may be drilled in the shank, such hole to be reamed and the shank to be tapered in New Zealand. Heads in the rough, but without pilot holes, being instead lightly ground or lightly turned on the shank, are to be admitted under the above decision.) | 1966/47 | 38, 23 June 1966, p. 1002 |
| Overlays, being small pieces of timber, shaped or bent to fit the throat portion of tennis and similar racquets | 1966/47 | 38, 23 June 1966, p. 1002 |
| Shafts and piles, metal, unpolished and unplated, declared by a manufacturer for use by him only in making arrows | 1966/47 | 38, 23 June 1966, p. 1002 |
| Shafts, metal, for ski sticks (whether in the black, polished, plated, or otherwise surfaced) and snowtips, and collars for such shafts, when declared by a manufacturer that they will be used by him only in making up ski sticks, of which the other components will be made in New Zealand | 1966/47 | 38, 23 June 1966, p. 1002 |
| Shafts, steel, in the rough, and ferrules, for making badminton and similar racquets, declared by a manufacturer (a) that the shafts and ferrules will be used by him only in making badminton and similar racquets and (b) that in making such racquets the frame therefor will be made in New Zealand from wood which will not be imported in a more advanced state than that of strips of timber not worked or bent to shape in any way | 1966/47 | 38, 23 June 1966, p. 1002 |
| Starch, pregelatinised, in other than retail packages Stock 983 (Bentone 34) Stoves and ranges—Bosses, diecast brass, for the manufacture of elements for electric ranges Canopy pins, being shanks or pins for running into castings to form projecting pins Insets, cast in, for grid pillars of ranges Knobs, door, for gas cookers, with special metal attachments to ensure tight closing Stampings and handles, in the black, for making grill pans for gas cookers Stampings, oven grid, in the black, and unassembled | 1966/47 | 38, 23 June 1966, p. 1002 |
| The following materials declared by a manufacturer for use by him only in making (not repairing) articles in New Zealand Nipples, union, regulating, for ranges Pins, terminal, nickel chrome, for making radiant elements Stampings, iron or steel, in the rough, for making oil burning stoves Stampings, non-ferrous metal, in the rough, for making oil-burning stoves | 1966/47 | 38, 23 June 1966, p. 1002 |
| Straws, drinking—Paper, declared by a manufacturer for use by him only for making drinking straws Sulphite of lye (Lignin pitch) Surgical—Pulley blocks, with eyebolts and metal fittings attached, declared for use only in making surgical suspension apparatus Springs, truss Synolide 960 | 1966/47 | 38, 23 June 1966, p. 1002 |
| Dated at Wellington this 29th day of September 1966. J. F. CUMMINGS, Comptroller of Customs.
| Tariff Notice No. 1966/86—Review of Former Tariff Concessions DECISIONS in respect of goods approved by the Minister of Customs under item 448 of the former Tariff, as set out in Schedule I hereto, are to be reviewed. Persons desiring, or objecting to, the admission of any of these goods under Part II of the Tariff now in force should lodge submissions in writing on or before 20 October 1966. Submissions, headed “448 Review”, should be prepared separately for each of the decisions listed, and addressed to the Comptroller of Customs, Private Bag, Wellington, supported by information as to: (a) Full details of composition and nature of the goods; (b) Purpose for which they are to be used; (c) Quality and frequency of importation (in terms of actual annual requirements); (d) Usual source of supply; N.B. Where goods are not of Commonwealth origin, information as to availability from Commonwealth sources should be supplied; (e) Availability (in terms of quality, range, supply, etc.) of suitably equivalent goods of New Zealand production or manufacture. Failure to supply information under all or any of the foregoing headings may prejudice consideration of the submissions. Decisions in respect of goods approved by the Minister of Customs under item 448 of the former Tariff, as set out in Schedule II hereto, are revoked with effect from 20 October 1966. (The rates of duty for these goods under Part I of the Tariff now in force are the same or lower than the rates under item 448 of the former Tariff.) | SCHEDULE I Vegetable lecithin containing over 1 percent of water Vehicles— Beading, metal, in lengths, with or without a rubber or fabric insert, and with or without nails fixed therein, but not drilled, polished, or otherwise worked Brackets or ends, rug rail Channelling, aluminium- or nickel-plated brass, felt lined, not drilled or otherwise worked Channelling, chromium-plated metal, polished, but not bored or otherwise worked, with or without rubber strip inserts, for use in making louvres for the side windows of motor vehicles Channelling, felt, or felt reinforced with wire Channelling or drip moulding, steel, not drilled or otherwise worked Channelling, rubber, felt lined Channelling, steel, felt lined, not drilled or otherwise worked Rope pulls, specially suited for use as fittings for motor- vehicle bodies Rug ropes, specially suited as fittings for motor-vehicle bodies Sealing strip in the piece, other than wholly of rubber, for use on windows or doors of motor vehicles Sleeves, celluloid, for vehicle hanger straps The following fittings declared by a manufacturer for use by him only in making motor-vehicle bodies— Brackets, footrest, unhinged Brackets, straphanger (without straps) Buffers, door, of metal and rubber Handles, body, other than door handles Handles, pull-to |