1334
THE NEW ZEALAND GAZETTE
No. 50
(3) Uses the wharf premises for private purposes or for
any purpose for which such wharf was not intended:
shall be liable to a fine not exceeding £20.
All landing dues shall be paid quarterly, on returns to be
furnished to the Clerk of the said Council or other person
appointed by the said Council, by the receiver of the goods,
or on returns from the books of the master or owner of the
vessel which carried them.
W. J. SCOTT, Minister of Marine.
(M. 4/207)
NZSS 414:1959 Automobile filament
lamps; being BS 941:1958
Number and Title of Specification Amendment
No. 3 (PD 4292)
No. 4 (PD 4933)
NZSS 1085:1952 Couplings for suction
and delivery hose : (1½ in. to 8 in. nominal
sizes) other than fire hose couplings; being BS 1782:1951
No. 4 (PD 4789)
NZSS 1181:1953 Test code for kilns for
heavy clay ware, including refractory
materials; being BS 1081:1942
No. 1 (PD 1645)
NZSS 1220-Tube and pipe fittings for
engineering purposes-
Part 1:1954 Copper and copper alloy
capillary and compression tube fittings
(for use with fractional o.d. sizes of
tubes); being BS 2051: Pt. 1:1953 No. 3 (PD 3928)
NZSS 1665:1962 Cables for vehicles; being BS 1862:1959 No. 2 (PD 4693)
NZSS 1748:1962 Schedule for electric
discharge lamps for general purposes;
being BS 1270:1960
No. 3 (PD 5108)
Application for copies of the standard specifications so
amended should be made to the N.Z. Standards Institute,
Bowen State Building, Bowen Street, or Private Bag, Wellington C. 1. Copies of the amendments will be supplied, free of
charge, upon request.
Dated at Wellington this 17th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/3:1243-50)
Specifications Declared to be Standard Specifications
PURSUANT to the Standards Act 1941 and the regulations
made thereunder, the Minister of Industries and Commerce, on
10 August 1964, declared the under-mentioned specifications to
be standard specifications:
Price of
Number and Title of Specification (Post Free)
Copy
s. d.
NZSS 1901:1964 Copper-silicon rods, sections,
forging stock, and forgings; being BS 1948:1963
7 6
NZSS 1902:1964 Schedule of copper and copper
alloys. Wire; being BS 2873:1963
20 0
NZSS 1903:1964 Schedule of wrought copper and
copper alloys. Plate; being BS 2875:1963
20 0
NZSS 1904:1964 Steel pipes and tubes for pressure
purposes. Low and medium alloy steel; being BS
3604:1963
8 6
NZSS 1905:1964 Methods for proving the gas-
tightness of vacuum or pressurized plant; being
BS 3636:1963
35 0
Application for copies should be made to the N.Z. Standards
Institute, Bowen State Building, Bowen Street, or Private Bag,
Wellington C. 1.
Dated at Wellington this 12th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/2:2538-42)
The Standards Act 1941-Specification Declared to be Standard
Specification
PURSUANT to the provisions of the Standards Act 1941, and
the regulations made thereunder the Minister of Industries and
Commerce, on 10 August 1964, declared the under-mentioned
specification to be a standard specification:
Number and Title of Specification: NZSS 1881:1964 Pure
tone diagnostic audiometers.
Price of Copy (Post Free): 3s.
Application for copies should be made to the N.Z. Standards
Institute, Bowen State Building, Bowen Street, or Private
Bag, Wellington C. 1, or to the Government Bookshops at
Auckland, Hamilton, Wellington, Christchurch, or Dunedin.
Dated at Wellington this 12th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/2:2543)
The Standards Act 1941—Specification Declared to be a
Standard Specification
PURSUANT to the provisions of the Standards Act 1941 and
the regulations made thereunder, the Minister of Industries and
Commerce, on 14 August 1964, declared the under-mentioned
specification to be a standard specification:
Number and Title of Specification: NZSS 1344:1964
Colours of light signals; being BS 1376:1953.
Price of Copy (Post Free): 4s. 6d.
Application for copies should be made to the N.Z. Standards
Institute, Bowen State Building, Bowen Street, or Private Bag,
Wellington C. 1.
Dated at Wellington this 17th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/2:2518)
Amendment of Standard Specifications
PURSUANT to the Standards Act 1941 and regulations made
thereunder, the Minister of Industries and Commerce, on
14 August 1964, amended the under-mentioned standard specifications by the incorporation of the amendments shown hereunder:
Number and Title of Specification Amendment
NZSS 344:1949 Dimensions of rivets
(½ in. to 1¾ in. diameter); being BS
275:1927
No. 2 (PD 4947)
Amendment of Standard Specification
PURSUANT to the Standards Act 1941 and the regulations made
thereunder, the Minister of Industries and Commerce, on
31 July 1964, amended the under-mentioned standard specification by the incorporation of the amendment shown hereunder:
Number and Title of Specification: NZSS 365:1944 Glazed
clay sewer pipes.
Amendment: No. 3.
Application for copies of the standard specification so amended should be made to the N.Z. Standards Institute,
Bowen State Building, Bowen Street, or Private Bag, Wellington C. 1, or the Government Bookshops at Auckland, Hamilton,
Wellington, Christchurch, or Dunedin.
Copies of the amendment will be supplied, free of charge,
upon request.
Dated at Wellington this 17th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/3:1235)
The Standards Act 1941-Draft New Zealand Standard Specification (Government Purchasing Series) D 7935 - Electrically Heated Hot Food Service Counters (Bain Marie Type) With Cupboards
PURSUANT to subsection (3) of section 8 of the Standards Act 1941, notice is hereby given that the above-mentioned draft New Zealand standard specification is being circulated. All persons who may be affected by this specification and who desire to comment thereon may, on application, obtain copies on loan from the New Zealand Standards Institute,
Bowen State Building, Bowen Street, or Private Bag, Wellington C. 1.
The closing date for the receipt of comment is 2 October 1964.
Dated at Wellington this 13th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/8)
The Standards Act 1941—Draft Amendment to the New Zealand Standard Specification for Seat Belt Assemblies for Motor Vehicles (NZSS 1662:1961)
PURSUANT to subsection (3) of section 8 of the Standards Act 1941, notice is hereby given that the above draft amendment is being circulated under the reference No. D 7955. All persons who may be affected by this amendment and who desire to comment thereon may, on application, obtain copies free of charge from the New Zealand Standards Institute, Bowen State Building, Bowen Street, or Private Bag
Wellington C. 1.
The closing date for receipt of comment is 3 September 1964.
Dated at Wellington this 14th day of August 1964.
V. FAIRHALL,
Acting Executive Officer, Standards Council.
(S.I. 114/2/8)