✨ Technical Standards and Regulations
NEW ZEALAND GAZETTE, No. 88 — 13 AUGUST 2015
EN 61326-1 Electrical equipment for measurement, control and laboratory use. EMC requirements
EN 61439-1 Low-voltage switchgear and controlgear assemblies
EN 61543 Residual current-operated protective devices (RCDs) for household and similar use
EN 61800-3 Adjustable speed electrical power drive systems. EMC requirements
EN 61812-1 Specified time relays for industrial use. Requirements and tests
EN 62040-2 Uninterruptible power systems (UPS). Electromagnetic compatibility (EMC) requirements
EN 62052-11 Electricity metering equipment (AC). General requirements, tests and test conditions. Metering equipment
EN 62052-21 Electricity metering equipment (AC). General requirements, tests and test conditions. Tariff and load control equipment
EN 62054-11 Electricity metering equipment (AC). Tariff and load control – electronic ripple control receivers
EN 62054-21 Electricity metering equipment (AC). Tariff and load control – time switches
Table 5 - Codes of Practice and other provisions
COP 001 Personal computer assemblies
UN ECE R10 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
Table 6 - ISM Frequencies
| Characteristic Frequency | Frequency Range |
|---|---|
| 6.780 MHz | 6765 – 6795 MHz |
| 13.56 MHz | 13.553 – 13.567 MHz |
| 27.12 MHz | 26.957 – 27.283 MHz |
| 35.7 MHz | 35.4 – 36 MHz |
| 40.68 MHz | 40.66 – 40.7 MHz |
| 433.92 MHz | 433.05 – 434.79 MHz |
| 921.5 MHz | 915 – 928 MHz |
| 2.45 GHz | 2.4 – 2.5 GHz |
| 5.8 GHz | 5.725 – 5.875 GHz |
| 24.125 GHz | 24 – 24.25 GHz |
| 61.25 GHz | 61 – 61.5 GHz |
| 122.5 GHz | 122 – 123 GHz |
| 245 GHz | 244 – 246 GHz |
Table 7 - Variations to Standards
| Standard | Provisions |
|---|---|
| AS/NZS CISPR14-1 | Subclauses 7.2.1 and 8.4 do not apply. |
| EN 55014 | Subclauses 7.2.1 and 8.4 do not apply. |
| CISPR 14 | Subclauses 7.2.1 and 8.4 do not apply. |
| AS/NZS CISPR22 | Subclause 4.2 does not apply to the extent that a warning is not required to be included in the instructions for use. |
| EN 55022 | Subclause 4.2 does not apply to the extent that a warning is not required to be included in the instructions for use. |
44
Next Page →
NZ Gazette 2015, No 88
✨ LLM interpretation of page content
🏭
Radiocommunications (EMC Standards) Notice 2015
(continued from previous page)
🏭 Trade, Customs & IndustryRadiocommunications, EMC Standards, Electrical Products, Electronic Products, Interfering Equipment, Technical Standards, Compliance Requirements, EN Standards