NEW ZEALAND GAZETTE

No. 16

Tariff Industry Assistance (Advertisement) Notice No. 2004/06 – continued

CURRENT APPROVAL:

84.59)
84.60)
84.61)
84.62)
84.63)

Machine-tools for working metal or metal carbides, not being machines falling within heading No. 84.67 or 84.68:

EXCLUDING:

1. Bandsaws, (other than automatically controlled bandsaws), with a maximum cutting capacity in the horizontal, 45° or 90° positions as follows:

   • Cutting at 90°, round bar capacity up to 260mm diameter
   • Cutting at 90°, flat bar up to 430mm wide x 260mm high
   • Cutting at 45°, round bar capacity up to 260mm diameter
   • Cutting at 45°, flat bar up to 280mm wide x 260mm high

2. Box and plan folders, hand operated

3. Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width

4. Chain saw sharpeners

5. Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill

6. Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel.

7. Dualfoam hydraulic press with facility to cast its own tools, models 5E, 6, 7, 8 and 9

8. Machinery, (other than numerically controlled machine tools), peculiar for use in making and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity:

   • Swaging, 19mm-76mm
   • Expanding, 25mm-76mm;
   • Bending, 19mm-76mm;
   • Forming bends of 60mm-140mm radii

9. Metal circular saws hand operated with high-speed steel blades not exceeding 250mm

10. Metalworking guillotines and shears, excluding the following:

    • 762mm power operated guillotines especially suited for use in the photo-processing and engraving trade for cutting zinc, magnesium and copper sheets
    • Reinforced steel bar cropping machines, with capacity exceeding 20mm
    • Types with a straight cutting edge of 105mm or less

11. Metal hacksaws, (other than automatically controlled hacksaws), with a rated square material cutting capacity of which any one measurement is 280mm or less

12. Plate rolls (other than those having a top roll diameter of 255mm and lower roll diameter of 215mm)

13. Press brakes (including coil cradle straighteners)

14. Presses, hydraulic

15. Presses, mechanical, power operated and other, not exceeding 35 tonnes capacity

16. Punch, crop and rivet presses, not exceeding 3.05 tonnes capacity

17. Rod reinforcing steel cutters, not exceeding 20mm mild steel capacity

18. Roll forming machines, including continuous spouting and continuous ridging machines

19. Shearing, punching and notching machines, hand and hydraulically operated

20. Sheet metal folding machines

21. Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity

22. Swaging and crimping machines

23. Metal cutting bandsaws in vertical positions with a maximum cutting throat depth up to 450mm

N.B. Any multi-purpose or composite machines incorporating any of the functions above are excluded from this concession

| 99 | 993927L | V |

REQUESTED APPROVAL:

84.59)
84.60)
84.61)
84.62)
84.63)

Machine-tools for working metal or metal carbides, not being machines falling within heading No. 84.67 or 84.68:

EXCLUDING:

1. Bandsaws, (other than automatically controlled bandsaws), with a maximum cutting capacity in the horizontal, 45° or 90° positions as follows:

   • Cutting at 90°, round bar capacity up to 260mm diameter
   • Cutting at 90°, flat bar up to 430mm wide x 260mm high
   • Cutting at 45°, round bar capacity up to 260mm diameter
   • Cutting at 45°, flat bar up to 280mm wide x 260mm high

2. Box and plan folders, hand operated

3. Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width

4. Chain saw sharpeners

5. Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill

6. Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel.

7. Dualfoam hydraulic press with facility to cast its own tools, models 5E, 6, 7, 8 and 9

8. Machinery, (other than numerically controlled machine tools), peculiar for use in making and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity:

   • Swaging, 19mm-76mm
   • Expanding, 25mm-76mm;
   • Bending, 19mm-76mm;
   • Forming bends of 60mm-140mm radii

9. Metal circular saws hand operated with high-speed steel blades not exceeding 250mm

10. Metalworking guillotines and shears, excluding the following:

    • 762mm power operated guillotines especially suited for use in the photo-processing and engraving trade for cutting zinc, magnesium and copper sheets
    • Reinforced steel bar cropping machines, with capacity exceeding 20mm

| 99 | 999982F | V |