✨ Tariff Concession Approvals
NEW ZEALAND GAZETTE
No. 88
Tariff Act 1988
TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 28) 2003
I, Vincent Anthony Manks, Executive Officer, Ministry of Economic Development, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:
(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and
(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe;
(c) Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice;
(d) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Fifth Schedule to this notice the exemption from duty of such goods with effect from the first day of the month so specified.
FIRST SCHEDULE
Concessions Approved
| Tariff Item | Description of Goods | Rates of Duty Normal | Pref. | Part II Ref. | Ref. No. | Effective From | To |
|---|---|---|---|---|---|---|---|
| A | Disposable sleeve protectors of PVC | 19 | CA 6.5 | 99 | 999361E | 11/02 | .. |
| A | 100% acrylic throws, square or rectangular, fringed decorative throws not tailored or shaped and without ties of a size not exceeding 180cm x 160cm | Free | 99 | 999648G | 5/03 | .. | |
| A | Chafe protection sleeves of fabric, of a type suited for use in the heavy marine industry | Free | 99 | 999646L | 5/03 | .. | |
| A | Covers for ironing boards | Free | 99 | 999645B | 5/03 | .. | |
| A | Copper tubes and pipes, of refined copper, other than those tubes and pipes having a nominal external diameter of less than 3mm, and those having a nominal internal diameter of 90mm and over | Free | 99 | 999647J | 5/03 | .. | |
| V A | Rachet lever hoists | Free | 99 | 999653C | 5/03 | .. | |
| A | Airflow cleaning system, of a kind used for solder frames, carriers and machinery parts | Free | 99 | 999650J | 5/03 | .. | |
| X | Parts and accessories of motor vehicles falling within Tariff heading No. 87.01, 87.02, 87.03, 87.04 or 87.05 EXCLUDING: Adaptor plates to fit Isuzu and Cummins engines; Air dams; Arm rests; Automatic transmission oil coolers other than aluminium wafer type coolers and amphibious vehicle automatic transmission oil coolers; Axle assemblies for trailer and tag operation viz: axle beams, axle spindles, brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins, brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft brackets, dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs (stud and spoked), brake drums; Bonnetguards; Bull bars; Canopies; Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of Tariff heading 87.16); Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts. (The nose cut of a motor vehicle is the front panel assembly forward of and including the radiator support rail but not including the radiator. Radiators included in the nose cut remain subject to duty. Bum cuts of motor vehicles comprise only the rear bumper, rear panel and rear lights); Disc brake pad assemblies and disc pad kits; Door control systems, air, air-bleed or vacuum operated, viz: single/double folding (jackknife), single/double gliders; Engines; Exhaust pipes; Exhaust systems (comprising piping and mufflers); External luggage racks; Glare stops; Headlight covers; Interior trim components of hardboard, cardboard or similar materials, leather or plastic sheetings, cut to shape; Melt sheet, cut to shape; Moulded wellside deckliners other than those for Chevrolet and Ford F series vehicles; Mufflers, silencers, resonators; Radiator cores and assemblies; Seat belts; Spoilers of plastic; Towballs; Upholsterers materials (such as flock, wadding, batting, fluting, linters, padding, foam) cut, moulded or fabricated to shape; Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or fabricated to shape; Weathershields; Wheel balance weights; Wheel spinners for use on steering wheels; Wheels of magnesium, aluminium alloys, (less than 17" (43.18cm) in diameter), whether one piece construction or composite with tyres thereon; Wheels of steel with tyres thereon (excluding: space saver wheels, with tyres attached, of the following sizes, viz: T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15, T125/70D16) | Free | 99 | 999684C | 8/03 | .. | |
| A | Invalid carriages, viz: mobility scooters, three and four wheeled types | Free | 99 | 999651G | 5/03 | .. | |
| A | Watch straps/bands | Free | 99 | 999652E | 5/03 | .. |
Next Page →
Online Sources for this page:
VUW Te Waharoa —
NZ Gazette 2003, No 88
Gazette.govt.nz —
NZ Gazette 2003, No 88
✨ LLM interpretation of page content
🏭
Tariff Concession Notices
(continued from previous page)
🏭 Trade, Customs & Industry24 July 2003
Tariff, Concessions, Approvals, Withdrawals, Customs
- Vincent Anthony Manks, Executive Officer, Ministry of Economic Development