β¨ Tariff Concessions Notices
1 DECEMBER
CUSTOMS EDITION
4609
Tariff Act 1988
TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 45) 1998
I, Vincent Anthony Manks, Executive Officer, Ministry of Commerce, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:
(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and
(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe; and
(c) Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice
(d) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Fifth Schedule to this notice the exemption for duty of such goods with effect from the first day of the month so specified.
FIRST SCHEDULE
Concessions Approved
| Tariff Item | Description of Goods | Rates of Duty Normal | Pref. | Part II Ref. | Ref. No. | Effective From | To |
|---|---|---|---|---|---|---|---|
| V | 82.02 | Blades for hand or machine saws (including toothless saw blades) EXCLUDING: (1) Circular saw blades (i) Tungsten carbide tipped, 900mm and under (ii) Solid tooth from 305mm (12in) to 610mm (24in) diameter, designed for cutting timber (2) Gang saw blades for wood sawing (3) Bandsaw and toothed bandsaw strip for wood sawing (4) High carbon steel bandsaw blade (excluding high speed steel solid and high speed steel welded edge, and tungsten carbide tipped and tungsten carbide coated and titanium carbide tipped) for cutting meat, bone, and metal in (i) Hard edge flexible back; or (ii) Hard edge tempered (i.e. toughened) back types, in any length, and of the following dimensions: (a) in widths between 6.35mm and 31.75mm inclusive; and (b) with pitches between 3 and 32 teeth per 25.40mm, excluding scalloped teeth EXCLUDING: Blades over 80mm in total length; Lugged type blades; Tungsten carbide coated and tipped blades High speed, hollow ground side clearance types or ground tooth form types (5) Hacksaw blades, 155mm to 600mm length (6) Blades for tubular frame firewood or pulpwood saws (7) Jigsaw blades | Free | Free | 99 | 996637E | 9/98 |
| X | Chapter 84 | Catalogued or identifiable parts of machines may be admitted under the Part II duty concession granted in respect of the parent machine. Catalogued or identifiable parts of machines which in their own right are entitled to a Normal Tariff rate of free under Part I of the Tariff are also covered by this concession. This applies regardless of Tariff classification with the following exceptions; (1) Parts of general use (2) Any part which is the subject of a specific Determination of the Minister (3) Electric motors (4) Fans and blowers (5) Parts of machines approved for entry under Part II concessions 60, 70, 80, 81 (6) Buckets, shovels and grabs and parts thereof (7) Hydraulic hoses with fittings attached (8) Articles of needleloom felt (9) Interchangeable tools, e.g., tool bits, saw blades, grinding wheels (10) Tyres and tubes (11) Electric accumulators (12) Electric filament or discharge lamps and tubes (13) Knives and cutting blades (14) Engines (15) Transmission shafts - flexible (16) Computer printer, typewriter, calculator, cash register and similar machine ribbons (17) Oil, air and fuel filters for internal combustion engines except those filters qualifying for Part II concession listed under Tariff Heading 84.27 (18) Parts of forklift trucks of Tariff heading 84.27 | Free | Free | 99 | 996753C | 11/98 |
| A | 8419.81.00 | Commercial induction cook tops incorporating pot sensor system | Free | Free | 99 | 996614F | 9/98 |
| A | 8419.89.09 | Stainless steel spa heater, output 1.5kw to 6kw, suited for use in digital heater control systems | Free | Free | 99 | 996657K | 9/98 |
| X | 8422.40.09 | Toilet tissue overwrapper with handling capacity of up to 750 rolls per minute, and variable multi roll packing configuration | Free | Free | 99 | 996600F | 7/98 |
| X | 8431.20.00 | Attachments for farm materials handling machines regardless of Tariff classification | Free | Free | 99 | 993700F | 10/95 |
| A | 8483.30.09 | Bearing housings of thermoplastic or cast iron | Free | Free | 99 | 996656A | 9/98 |
| A | 8516.10.00 | Electrical mini storage water heaters 10β15 litre capacity, complete with fittings for installation | Free | Free | 99 | 996659F | 9/98 |
| A | 8708.70.19 | Magnesium motorsport race wheels, whether in one piece or composite | Free | Free | 99 | 996621J | 9/98 |
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1998, No 195
NZLII —
NZ Gazette 1998, No 195
β¨ LLM interpretation of page content
π Tariff Concession Approvals, Withdrawals, and Declines Notice
π Trade, Customs & Industry1 December 1998
Tariff, Concessions, Approvals, Withdrawals, Customs, Trade, Goods, Duty, Exemptions
- Vincent Anthony Manks, Executive Officer, Ministry of Commerce