4140

NEW ZEALAND GAZETTE

No. 174

TARIFF INDUSTRY ASSISTANCE (ADVERTISEMENT) NOTICE NO. 1998/39
Applications Advertised for Objection
Closing Date for Objections 10th November 1998

1 Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection should do so in writing, to the Ministry of Commerce, PO Box 1473, Wellington, Fax 0-4-474-2843 indicated by the reference number, before 10th November 1998. All submissions should include:

• the Tariff Industry Assistance (Advertisement) Notice number;
• the Tariff item; and
• Reference number.

2 All submissions from local manufacturers should include:

• the range of alternative goods made locally;
• the grounds on which objection is made (including reasons why the local product is a suitable alternative);
• present and potential output;
• details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.

3 All submissions objecting to a request for the withdrawal of a concession should include:

• reasons why the local product on which protection is sought is not a suitable alternative;
• full technical details of the goods against which tariff protection is sought.

4 Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Commerce quoting the details in paragraph 1 above.

C/- PO Box 37 712
Parnell
AUCKLAND | 99 | 996665L | IM |
| 7010.93.90 | Flint 290ml hexagonal Ref 1138, quantity 160,000 units | Newpro Industries Ltd
PO Box 21-197
Henderson
AUCKLAND | 99 | 996666J | IM |
| 7208.27.00 | Hot rolled steel strip, pickled and oiled, of a thickness less than 2mm | Southward Engineering Co Ltd
PO Box 36036
Moera
LOWER HUTT | 99 | 996667G | A |

82.02

CURRENT APPROVAL:
Blades for hand or machine saws (including toothless saw blades)
EXCLUDING:
(1) Circular saw blades
(i) Tungsten carbide tipped, 900mm and under
(ii) Solid tooth from 305mm (12in) to 610mm (24in) diameter, designed for cutting timber
(2) Gang saw blades for wood sawing
(3) Bandsaw and toothed bandsaw strip for wood sawing
(4) High carbon steel bandsaw blade (excluding high speed steel solid and high speed steel welded edge, and tungsten carbide tipped and tungsten carbide coated and titanium carbide tipped) for cutting meat, bone, and metal in
(i) Hard edge flexible back; or
(ii) Hard edge tempered (i.e. toughened) back types, in any length, and of the following dimensions:
(a) in widths between 6.35mm and 31.75mm inclusive; and
(b) with pitches between 3 and 32 teeth per 25.40mm, excluding scalloped teeth
(5) Jigsaw blades
EXCLUDING:
Blades over 80mm in total length;
Lugged type blades;
Tungsten carbide coated and tipped blades
High speed, hollow ground side clearance types or ground tooth form types
(6) Hacksaw blades, 155mm to 600mm length
(7) Blades for tubular frame firewood or pulpwood saws

82.02

REQUESTED APPROVAL:
Blades for hand or machine saws (including toothless saw blades)
EXCLUDING:
(1) Circular saw blades
(i) Tungsten carbide tipped, 900mm and under
(ii) Solid tooth from 305mm (12in) to 610mm (24in) diameter, designed for cutting timber
(2) Gang saw blades for wood sawing
(3) Bandsaw and toothed bandsaw strip for wood sawing
(4) High carbon steel bandsaw blade (excluding high speed steel solid and high speed steel welded edge, and tungsten carbide tipped and tungsten carbide coated and titanium carbide tipped) for cutting meat, bone, and metal in | 99 | 994487H | V |

| | | Makita (NZ) Limited
C/- BAX Global (NZ) Limited
PO Box 97088
SOUTH AUCKLAND MAIL CENTRE | 99 | 996637E | V |