21 OCTOBER

CUSTOMS EDITION

3549

Tariff Industry Assistance (Advertisement) Notice No. 1997/40 – continued

84.62 | (1) Bandsaws (other than automatically controlled bandsaws), with a maximum cutting capacity in the horizontal, 45° or 90° positions as follows:
Cutting at 90°, round bar capacity up to 260mm diameter
Cutting at 90°, flat bar up to 430mm wide x 260mm high
Cutting at 45°, round bar capacity up to 260mm diameter
Cutting at 45°, flat bar up to 280mm wide x 260mm high

  (2) Box and plan folders, hand operated

  (3) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width

  (4) Chain saw sharpeners

  (5) Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill

  (6) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel

  (7) Dualfoam hydraulic press with facility to cast its own tools, models 5E, 6, 7, 8 and 9

  (8) Machinery, (other than numerically controlled machine tools), peculiar for use in making and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity;
  swaging, 19mm-76mm
  expanding, 25mm-76mm;
  bending, 19mm-76mm;
  forming bends of 60mm-140mm radii

  (9) Metal circular saws hand operated with high speed steel blades not exceeding 250mm

  (10) Metalworking guillotines and shears, excluding the following:
  762mm power operated guillotines especially suited for use in the photo-processing and engraving trade for cutting zinc, magnesium and copper sheets
  Reinforced steel bar cropping machines, with capacity exceeding 20mm
  Types with a straight cutting edge of 105mm or less

  (11) Metal hacksaws, (other than automatically controlled hacksaws), with a rated square material cutting capacity of which any one measurement is 280mm or less

  (12) Plate rolls (other than those having a top roll diameter of 255mm and lower roll diameter of 215mm)

  (13) Press brakes (including coil cradle straighteners)

  (14) Presses, hydraulic

  (15) Presses, mechanical, power operated and other, not exceeding 35 tonnes capacity

  (16) Punch, crop and rivet presses, not exceeding 3.05 tonnes capacity

  (17) Rod reinforcing steel cutters, not exceeding 20mm mild steel capacity

  (18) Roll forming machines, including continuous spouting and continuous ridging machines

  (19) Shearing, punching and notching machines, hand and hydraulically operated

  (20) Sheet metal-folding machines

  (21) Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity

  (22) Swaging and crimping machines

  (23) Metal cutting bandsaws in vertical positions with a maximum cutting throat depth up to 450mm

  N.B. Any multi-purpose or composite machines incorporating any of the functions above are excluded from this concession |

REQUESTED APPROVAL:

84.59 | Machine-tools for working metal or metal carbides, not being machines falling within heading No. 84.67 or 84.68: | Engineering Machine Sales C/- Compass Customs Brokers Ltd PO Box 73 097 AUCKLAND INTERNATIONAL AIRPORT | 99 | 995434B V |
84.60 | EXCLUDING: |
84.62 | (1) Bandsaws, (other than automatically controlled bandsaws), with a maximum cutting capacity in the horizontal, 45° or 90° positions as follows:
Cutting at 90 degree, round bar capacity up to 260mm diameter
Cutting at 90 degree, flat bar up to 430mm wide x 260mm high
Cutting at 45 degree, round bar capacity up to 260mm diameter
Cutting at 45 degree, flat bar up to 280mm wide x 260mm high

  (2) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width

  (3) Chain saw sharpeners

  (4) Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill

  (5) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel

  (6) Dualfoam hydraulic press with facility to cast its own tools, models 5E, 6, 7, 8 and 9