β¨ Tariff Concession Notices
NEW ZEALAND GAZETTE
No. 137
TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 36) 1997
I, Vincent Anthony Manks, Executive Officer, Ministry of Commerce, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:
(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified; and in that Schedule with effect from the first day of the month so specified:
(b) in accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified, subject however to such purposes and conditions which I prescribe; and
(c) Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice.
(d) Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.
(e) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Fifth Schedule to this notice the exemption from duty of such goods with effect from the first day of the month so specified.
FIRST SCHEDULE
Concessions Approved
| Tariff Item | Description of Goods | Rates of Duty Normal | Part II Ref. No. | Effective From | To |
|---|---|---|---|---|---|
| 3214.10.09 | Terostat-998R polysulphide adhesive/sealant | Free | Free | 99 995165C | 7/97 |
| V 3402.13.00 | Dispex A40, G40, GA40, N100, L40 and alcomer 74L | Free | Free | 99 995149A | 7/97 |
| V 3920.51.29 | Fire rated semi-rigid vinyl acrylic alloy sheeting not exceeding 5mm in thickness | Free | Free | 99 995167K | 7/97 |
| A 3926.90.69 | Plastic tubes specially designed to fit concreting dowels | Free | Free | 99 995164E | 7/97 |
| A 3926.90.69 | Wardrobe interior components excluding wire baskets | Free | Free | 99 995193I | 7/97 |
| 7326.20.19 | Wrap around bouquet holder designed to form upright cone | Free | Free | 99 995123H | 7/97 |
| A 4010.13.00 | Belt wall cross stabilised angle conveyor belts reinforced with high modulus polyester and fibreglass cross rigid plies | Free | Free | 99 995168H | 7/97 |
| A 5607.50.11 | Nylon or HMWPE fibre, 3 strand and braided rope, urethane coated and luminescent from diameter to 36mm diameter | Free | Free | 99 995206D | 7/97 |
| A 60.02 | Machine knitted allover lace. Knitted lace; the terms of this concession is restricted to fabrics which are used as edgings, insertions, beadings, flouncings and also fabrics which are known as 'allovers': It does not include fabrics in the piece which have been merely knitted in fancy or novelty designs | Free | Free | 99 995208L | 7/97 |
| A 6002.30.12 | Nylon/spandex stretch tulle | Free | Free | 99 995204H | 7/97 |
| A 6211.20.10 | Snow suit racing suit: F.I.S. approved minimum air permeability as per F.I.S. current rule book | Free | Free | 99 995202A | 7/97 |
| A 6804.21.00 | Diamond segmental saw blades | Free | Free | 99 995205F | 7/97 |
| V 7323.99.00 | Domestic bakeware, teflon or silicone coated, viz: |
- Baking pans and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.3cm x 29.2cm
- Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides; maximum diameter of 31.1cm
- 6 cup muffin pans, maximum muffin hole size of 7.6cm diameter
- Bread and loaf pans, oblong shaped only; maximum size 23.5cm x 13.3cm
- Heart shaped pans
- Covered roast pans 33cm x 22.9cm x 5.1cm deep
- Roast and bake pans 36.8cm x 26.7cm x 5.1cm deep
- Square bake pans 20.3cm x 20.3cm x 5.1cm deep
- Oblong cake pans 33cm x 22.9cm x 5.1cm deep
- Muffin pans 6 large cups 8.8cm diameter x 4.4cm deep
- Biscuit pans 27.3cm x 17.8cm x 3.8cm deep
- Round cake pans 20.3cm diameter x 3.8cm deep
- Round cake pans 22.9cm diameter x 3.8cm deep
- Pie pan (with shaped rim, including formed handles) 22.9cm
- Springform cake tins 20.6cm and 26.0cm
- Patty/tart tray 12 cup size
- Fluted tube pan 24.1cm
- Muffin pan 12 hole size
- Mini muffin pan 12 hole size
- Loaf/cake tin; approximately 6cm deep
- Sandwich tin
- Ring cake pan 24cm
- Fluted cake pan 22cm
- 3 piece (2 in 1 set) springform pan and fluted tube base 25cm
- 25cm bundt tin
- Extra long loaf tin 30cm
- Brioche tin 22cm
- Fluted tart pan 30cm
- Angel food cake pan loose base 24 x 10cm
- Meat loaf pan 22.9 x 14.6 x 6.3cm with or without non stick rack
- Petite broiler pan 27.6 x 18.1 x 5.1cm with or without non stick rack
- Medium roast pan 33.7 x 23.5 x 5.1cm with or without non stick rack
- Non stick roast racks
- Square cake pans 18cm, 20cm, 23cm, 25cm
- Mini angel food cake pan 6 cup size 9 x 4.5cm
- Mini fluted tube pan 6 cup size 9 x 4.5cm
- Mini heart pan 6 cup size 9 x 2.5cm
- Mini tart pan 6 cup size 9 x 2.5cm
- Angel food cake pan 24 x 8cm
- Large broiler pan grill topper with or without racks or grills 36.8 x 26.7 x 5.1cm
- Petite broiler pan grill topper with or without racks or grills 31.8 x 21 x 3.8cm
- Large broiler with or without racks or grills 36.8 x 26.7 x 5.1cm
- Small broiler with or without racks or grills 31.8 x 19.7 x 3.8cm
- Broiler pan with or without racks or grills 6.5 x 5.1 x 7.0cm | Free | Free | 99 995201C | 7/97 | ... |
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1997, No 137
NZLII —
NZ Gazette 1997, No 137
β¨ LLM interpretation of page content
π
Applications for Tariff Industry Assistance Advertised for Objection
(continued from previous page)
π Trade, Customs & Industry18 September 1997
Tariff concessions, Industry assistance, Applications, Objections, Customs
π Tariff Concession Approvals, Withdrawals and Declines Notice (No. 36) 1997
π Trade, Customs & IndustryTariff concessions, Approvals, Withdrawals, Declines, Ministry of Commerce
- Vincent Anthony Manks, Executive Officer, Ministry of Commerce
π First Schedule - Concessions Approved
π Trade, Customs & IndustryTariff concessions, Approved goods, Duty exemptions, Schedule