Tariff Concessions and Adjustments




17 JANUARY

CUSTOMS EDITION

83

Tariff Act 1988

TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 1) 1995

I, Vincent Anthony Manks, Executive Officer, Ministry of Commerce, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:

(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and

(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe; and

(c) Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice; and

(d) Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.

FIRST SCHEDULE

Concessions Approved

Tariff Item Description of Goods Rates of Duty Normal Pref. Part II Ref. Ref. No. Effective From To
X 2403.99.19 Smoking mixtures of tobacco substitutes Free Free 99 991458H 7/94
A 3004.39.09 Gracial tablets Free Free 26 991252F 10/94
X 3208.90.19 Pipeline protection tape (including sheet up to 30cm in width) primer Free Free 99 991760D 2/90
V 3402.20.00 Silver and gold polishing compounds viz: Free Free 99 991259C 10/94
Strachen jewel sparkle
Town talk jewel sparkle
Talkette jewel sparkle
Inverness jewellery cleaner
Connoisseurs silver jewellery cleaner
Connoisseurs gold jewellery cleaner
A 3506.91.00 “It-stays” body adhesive (PVP/VA copolymer) Free Free 99 991233K 10/94
V 3823.90.69 Casting/covering powders and granules of a type suited for use in steel production Free Free 99 991185F 10/94
A 3907.30.09 “Negex” negative plate expander premix Free Free 99 991269L 9/92
V 3917.33.00) TK 0823E Free Free 99 991271B 11/94
3917.39.08) Drip irrigation tube Free Free 99 991254B 10/94
V 3926.10.09 Pockets of clear polypropylene, including multi punched, and L shaped closed on two adjacent sides only Free Free 99 991235F 10/94
A 3926.90.61 Subsoil filtered drainage material consisting of a formed polymeric core exceeding 20mm in thickness and 102mm in height or width, and covered in a non-woven needle punched or bonded polypropylene fibre filter fabric Free Free 99 989471D 8/93
A 3926.90.69 Tie down fittings, viz: hooks, anchors, J hooks, extenders Free Free 99 991250K 10/94
V 40.16) Mats and sections therefore, floor, cut or moulded to shape, of a type suited for motor vehicles, catalogued parts Free Free 99 991167H 10/94
57.02)
57.03)
V 8708.29.11) Blade protectors being rubber strip 250mm (10 inches) in width bonded to steel blade Free Free 99 991260G 10/94
V 5806.31.00) Webbing, binding and support tapes to mil spec MIL-T-5661, MIL-W-4088, MIL-W-5625, MBF D44, MIL-T-5038, of a type used in the repair and servicing of parachute assemblies Free Free 99 991213E 10/94
5806.32.00)
A 5907.00.29 Thermoplastic heat seal tubs Free Free 99 991178C 10/94
A Chapter 61) Childrens fancy dress costumes viz: witches, fairies, pirates Free Free 99 991244E 10/94
A Chapter 62) super heroes, cowboys, clowns and similar
A 6403.30.19) Wooden soled industrial clogs Free Free 99 991228C 10/94
X 6403.99.19)
70.07 Curved of flat motor vehicle assembly glass, viz: Free Free 99 989146D 2/92
Motor Company Model Part No
Mazda 626 GA8A-63-931/930 (suffix as applicable)
Ford Telstar GA8A-63-931/930 (suffix as applicable)
V 7009.10.09 Exterior rear view mirrors Free Free 99 991202K 10/94
X 73.15) Chandelier crystal beads, drops and chain Free Free 99 681061G 1/88
94.05)
V 7323.99.00 Domestic bakeware, teflon or silicone coated, viz: Free Free 99 991231C 10/94
1. Baking trays and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.8cm x 29.2cm
2. Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides; maximum diameter of 31.1cm
3. 6 cup muffin pans, maximum muffin hole size of 7.6cm diameter
4. Bread and loaf pans, oblong shaped only; maximum size 23.5cm x 13.3cm
5. Heart shaped pans
6. Covered roast pans 33cm x 22.9cm x 5.1cm deep
7. Roast and bake pans 36.8cm x 26.7cm x 5.1cm deep
8. Square bake pans 20.3cm x 20.3cm x 5.1cm deep
9. Oblong cake pans 33cm x 22.9cm x 5.1cm deep
10. Muffin pans 6 large cups 8.8cm diameter x 4.4cm deep


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1995, No 2


NZLII PDF NZ Gazette 1995, No 2





✨ LLM interpretation of page content

🏭 Tariff Concession Approvals, Withdrawals, and Declines Notice

🏭 Trade, Customs & Industry
Tariff, Concessions, Approvals, Withdrawals, Customs, Trade
  • Vincent Anthony Manks, Executive Officer, Ministry of Commerce