NEW ZEALAND GAZETTE

No. 80

Tariff Industry Assistance (Advertisement) Notice No. 1993/20—continued

(6) Pressure, humidity and moisture control and measuring devices
(7) Industrial type batch and predetermined batch counters, but not including digital electronic frequencies above 1MHz
(8) Variable speed controllers for A.C. motors, sizes up to and including 600 kw
(9) Data logging systems designed for the measuring, indicating of physical data such as temperature, humidity, voltage, current, power and flow pressure
EXCLUDING:
Public water supply data logging equipment
(10) Echo-sounding, ultra-sonic and detecting equipment having a maximum depth range of up to 110m, excluding hermetically sealed units
(11) Bin and hopper level control instruments and apparatus
(12) Electronic differential thermostat switches designed to monitor or control the flow of gases, liquids or solids in the control of forced circulation solar heating systems, controlling loads up to 10kp or 7.5 kilowatts resistive
(13) Electronic marine instruments for recording boat speed and distance other than Depth Logs and Seafarer Logs
(14) Energy management systems, peculiar to use for measuring, analysing and controlling electrical demand
(15) Gas detection systems, peculiar for use in commercial and/or industrial environments, which measure and report concentrations of flammable or toxic gases in the air via alarm and/or analogue
(16) Power factor meters, flush mounting pointer type with circular or quadrant scales, accuracy class of 1.5 and having face size of 72mm or 96mm square
(17) Rectangular style moving coil and moving coil/rectifier ammeters and voltmeters including milliammeters having a face with a long side falling between 80mm and 92mm and a short side falling between 72mm and 84mm
(18) Portable electrically powered gas leak detector, gas detector and gas monitor and smoke warning alarms
(19) Post payment self-service petrol dispensing systems
(20) Power factor correction systems, including power factor controllers and ancillary equipment mounted in a common cubicle and designed to measure and automatically control the overall power factor in a 3-phase electrical installation, and such power factor controllers when imported separately
(21) Telemetry system designed for the remote control measuring and indicating of physical and electrical data, such as voltage, current, power and position status
(22) Electronic taximeters
(23) Ripple signal control equipment
(24) Parts of electrical weight or load measuring equipment; viz: load cells, load bars, weigh cells, load transducers, weight transducers, strain gauge transducers, force transducers
Other than:
Hermetically sealed transducers (being gas tight), shock proof transducers (being without fittings or attachments), explosion proof transducers, load pins, shackle pins, canister cells, single point cells, pancake cells, dual cantilever, straight types
(25) Electrical transducers including signal converters and isolators. Transducers are devices that measure an electrical quantity and converts it into a directly related load-independent DC current or voltage. The input may be current, voltage, power, phase angle frequency, resistance or other such electrical quantity | | | |

• 9502.99.00
  Dolls glasses | Lindsay Walkinshaw Ltd
  C/- PO Box 504
  DUNEDIN | 99 | 989068J | A

9603.90.19
Scraper, barbecue grill, one piece combination with brass bristle brush | Amalgamated Hardware Merchants Ltd
PO Box 995
AUCKLAND | 99 | 989053L | A

• Category of Application:
  A — General Approval
  CE — Capital Equipment
  IM — Inputs to Manufacturing – Inability to Supply
  IP — Inadequate Production
  MS — Manufacturers’ Samples
  RUC — Revocation of Unused Concession
  S — Shortfall
  SS — Special Situation
  V — Variation of Existing Concession
  W — Withdrawal of Concession

• — Denotes amendment or addition

Dated at Wellington this 3rd day of June 1993.

V.A. MANKS, Ministry of Commerce.