✨ Tariff Concession Approvals
NEW ZEALAND GAZETTE
No. 173
Tariff Act 1988
TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 45) 1993
I, Vincent Anthony Manks, Executive Officer, Ministry of Commerce, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:
(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and
(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe; and
(c) Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice; and
(d) Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.
(e) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Fifth Schedule to this notice the exemption from duty of such goods with effect from the first day of the month so specified.
FIRST SCHEDULE
Concessions Approved
| Tariff Item | Description of Goods | Rates of Duty Normal | Rates of Duty Pref. | Part II Ref. No. | Effective From |
|---|---|---|---|---|---|
| A 3305.10.00 | Hair loss preparations, viz: Electro H solution, lotion or shampoo | Free | Free | 99 989607E | 9/93 ... |
| A 3402.11.00 | Auscan AOS | Free | Free | 99 989620B | 10/93 ... |
| A 3402.13.00 | Lutrol | Free | Free | 99 989619J | 10/93 ... |
| X 3506.10.00 | Epoxy resin, two component kits, of a type suited for repair of aluminium radiators | Free | Free | 99 989411L | 7/93 ... |
| A 3921.90.01 | Sheet, polyurethane coated PVC with a non woven polyester-viscose backing | Free | Free | 99 989608C | 9/93 ... |
| A 3921.90.19 | Multi layered laminated sheet in rolls exceeding 0.8mm thickness | Free | Free | 99 989527C | 9/93 ... |
| A 3928.90.69 | Finger nails, press-on type | Free | Free | 99 989632F | 9/93 ... |
| A 4202.19.00 | Canes, protection, waterweight of linear low density polyethylene | Free | Free | 99 989608C | 9/93 ... |
| X 4202.50.10 | Leather protective suit for motorcycle racing, with rigid plastic protective inserts fitted for elbow, shoulders and knees | Free | Free | 99 987531L | 6/92 ... |
| V 4811.31.00 | Printed silicone release paper in reels, coated on one or both sides, 50gsm to 80gsm in weight, 760mm in width, of a type used in the manufacture of adhesive tape | Free | Free | 99 989399B | 8/93 ... |
| A 4818.90.00 | Paper doyleys | Free | Free | 99 989627K | 9/93 ... |
| A 4820.50.00 | Albums of a type used by children, designed to permit the placement and removal of stickers | Free | Free | 99 989621L | 9/93 ... |
| A 6002.30.12 | T3570 napped jersey polypropylene/lycra fabric | Free | Free | 99 989625C | 9/93 ... |
| X 6116.10.00 | Nitrile, neoprene, PVA or vinyl impregnated/coated gloves with cotton liner | Free | Free | 99 989432C | 11/92 ... |
| X 70.07 | Curved or flat motor vehicle assembly glass, viz: Motor Company Toyota | Free | Free | 98 988484L | 1/93 6/94 ... |
| Model: Part No. list available from Collector of Customs, Wellington Nissan Vehicle Assemblers Datsun 1974-79 68124-20091 GN32-63-8308 GM10-63-8308 G225-63-930 2402-60020 Mazda 121 323 626 929 MX-5 MX-6 RX 7 RX 9 E 1400 E 1600 E 1800 E 2000 Nissan Sentra Y10 83300-69R20 83301-69R20 | |||||
| A 7116.20.29 | Pyramids, eggs and balls of semi precious stone | Free | Free | 99 989631H | 9/93 ... |
| A 7315.89.19 | Decorating oven pin chain, for temperatures up to 260°C | Free | Free | 99 989623C | 9/93 ... |
| A 7326.90.09 | Screens, aircraft engine air inlet | Free | Free | 99 989622J | 9/93 ... |
| X 7615.10.00 | Domestic bakeware, teflon or silicone coated, of the following types: |
- Baking trays and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.8cm x 29.2cm
- Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides, maximum diameter of 31.1cm
- 6 cup muffin pan, maximum muffin hole size of 7.6cm diameter
- Bread and loaf pans, oblong shaped only, maximum size 23.5cm x 13.5cm
- Heart shaped pans
- Covered roast pans, 33cm x 22.9cm x 5.1cm deep
- Roast and bake pans, 36.8cm x 26.7cm x 5.1cm deep
- Square bake pans, 20.3cm x 20.3cm x 5.1cm deep
- Oblong cake pans, 33cm x 22.9cm x 5.1cm deep
- Muffin pans, 6 large cups, 8.8cm diameter x 4.4cm deep
- Biscuit pans, 27.3cm x 17.8cm x 3.8cm deep
- Round cake pans, 20.3cm diameter x 3.8cm deep
- Fluted tube pan 24.1cm | Free | Free | 99 989385H | 8/92 ... |
| V 8205.51.00 | Kitchen utensils, viz: | Free | Free | 99 989624E | 9/93 ...
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1993, No 173
NZLII —
NZ Gazette 1993, No 173
✨ LLM interpretation of page content
🏭
Tariff Industry Assistance Applications Advertised for Objection
(continued from previous page)
🏭 Trade, Customs & Industry25 November 1993
Tariff, Industry Assistance, Applications, Objections, Customs
- Vincent Anthony Manks, Executive Officer, Ministry of Commerce
🏭 Tariff Concession Approvals, Withdrawals, and Declines Notice
🏭 Trade, Customs & IndustryTariff, Concessions, Approvals, Withdrawals, Declines, Customs
- Vincent Anthony Manks, Executive Officer, Ministry of Commerce