✨ Tariff Industry Assistance Notices
NEW ZEALAND GAZETTE
No. 123
Tariff Industry Assistance (Advertisement) Notice No. 1993/30—continued
| Tariff Item | Description of Goods | Name and Address of Applicant | Part II Ref. No. | Appn. Category |
|---|
Cast iron, steel and stainless steel bodied – all sizes
BALL CHECK:
Cast iron, brass, bronze, gunmetal and plastic bodied (excluding aerosol types) – all sizes
Steel and stainless steel bodied – 40 mm (1/2 in.) and over
Back flow preventors, reduced pressure principle FOOT VALVES:
Cast iron, carbon steel or stainless steel bodied – 350 mm (14 in.) and over
Brass, bronze or gunmetal bodied – 65 mm (2 1/2 in.) and over
UL (underwriters laboratory) approved valves for LPG service
8481.30.00
REQUESTED APPROVAL:
Check valves (valves which prevent reversal of flow) viz:
In line steel bodied check valves – over 3/4 in.
SWING, TILTING DISC AND DUAL PLATE.
Brass, or gunmetal bodies – 125 mm (5 in.) and above
Bronze, 2 1/2 in., 5 in. and above
Cast steel bodied ANSI class 600 – size 400 mm (16 in.) and 500 mm (20 in.)
Iron or steel bodies 40 mm (1/2 in.) and below
Iron or steel bodies – 900 mm (36 in.) and over
Plastic bodied – all sizes excluding aerosol types
Stainless steel bodied – 40 mm (1/2 in.) and below
Stainless steel bodied 500 mm (20 in.) and over
Stainless steel bodied with flanged end connections – all sizes
LIFT, GLOBE OR PISTON: (Non Hydraulic)
Aluminium bodied – all sizes
Brass, bronze or gunmetal bodied – 200 mm (8 in.) and above
Cast iron, steel and stainless steel bodied – all sizes
BALL CHECK:
Cast iron, brass, bronze, gunmetal and plastic bodied (excluding aerosol types) – all sizes
Steel and stainless steel bodied – 40 mm (1/2 in.) and over
POPPET CHECK:
Back flow preventors, reduced pressure principle
FOOT VALVES:
Cast iron, carbon steel or stainless steel bodied – 350 mm (14 in.) and over
Brass, bronze or gunmetal bodied – 65 mm (2 1/2 in.) and over
UL (underwriters laboratory) approved valves for LPG service
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Grinnell Supply Sales |
PO Box 15 492
New Lynn
AUCKLAND | 99 | 989951C | V |
8507.90.00
CURRENT APPROVAL:
Battery cases of polypropylene with covers and vent plugs of the following types only: N10, N120, N150, types 389, 386/387, N70Z, N200, N570, N50Z
REQUESTED APPROVAL:
Battery cases of polypropylene, covers and vent plugs, of the following types only: N10, N120, N150 types 389, 386/387, N70Z, N200, N570, N50Z
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Yussa JRA Batteries Ltd |
C/- PO Box 78-043
AUCKLAND INTERNATIONAL AIRPORT | 99 | 989369F | V |
8516.10.00
Aquarium heaters, thermostatically controlled
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Gap Imports |
C/- Owens International Customs Ltd
PO Box 4144
WELLINGTON | 99 | 989357B | A |
8516.79.19
Presses, tie
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Convenience Products Ltd |
C/- Customs Agents (NN) Ltd
PO Box 1024
WELLINGTON | 99 | 989365C | A |
8520.90.19
Audio equipment, digital disk recorder, with or without remote controller and accessory boards
8537.10.00
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Australia Music NZ Ltd |
C/- K A Hobbs Customs Agents Ltd
PO Box 27312
AUCKLAND | 99 | 989361L | A |
Audio equipment, digital sampler, with or without remote controller and accessory boards
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Australia Music NZ Ltd |
C/- K A Hobbs Customs Agents Ltd
PO Box 27312
AUCKLAND | 99 | 989382J | A |
8544.20.00
Co-axial cable, T101 and T106, incorporating centre conductor of copper clad steel and outer conductor of aluminium tape and 2 end outer conductor of aluminium braid 53% covered PE and or PVC sheathed, with attenuation of 15.5dB/100m (RG-6) and 10.5dB/100m (RG-11) at 550mhz
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Telecom New Zealand Ltd |
C/- MSAS Cargo International
PO Box 53104
AUCKLAND AIRPORT | 99 | 989388B | SS |
9403.20.00
Wine bars, wrought iron
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| Zelands Imports Ltd |
C/- Kapiti Customs Brokers Ltd
PO Box 848
WELLINGTON | 99 | 989367K | A |
9403.90.00
CURRENT APPROVAL:
Component parts for the manufacture of Modulo 3 furniture
| Applicant | Part II Ref. No. | Appn. Category |
|---|---|---|
| ... | 99 | 420610L |
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1993, No 123
NZLII —
NZ Gazette 1993, No 123
✨ LLM interpretation of page content
🏭
Tariff Industry Assistance Advertisement Notice
(continued from previous page)
🏭 Trade, Customs & IndustryTariff, Industry Assistance, Applications, Objections, Customs