NEW ZEALAND GAZETTE

No. 48

TARIFF INDUSTRY ASSISTANCE (ADVERTISEMENT) NOTICE NO. 1992/12

Applications Advertised for Objection

Closing Date for Objections 5th May 1992

Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection must do so in writing, to the Ministry of Commerce, PO Box 1473, Wellington, Fax (04) 473-8949 indicated by the reference number, before 5th May 1992. All submissions must include:

-- the Tariff Industry Assistance (Advertisement) Notice number;
-- the Tariff item; and
-- Reference number.

All submissions from local manufacturers must include:

-- the range of alternative goods made locally;
-- the grounds on which objection is made (including reasons why the local product is a suitable alternative);
-- present and potential output;
-- details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.

All submissions objecting to a request for the withdrawal of a concession must include:

-- reasons why the local product on which protection is sought is not a suitable alternative;
-- full technical details of the goods against which tariff protection is sought.

Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Commerce quoting the details in paragraph 1 above.

Any submission not supported by the information required in the paragraphs above will be considered invalid.

Lankromark LC – liquid barium/cadmium/zinc stabilisers
Lankromark LZ – liquid barium/zinc or calcium zinc stabilisers
Lankromark LE – organophosphates | Chemcolour Industrial (NZ) Ltd
PO Box 100-145
AUCKLAND | 99 | 987036K | A |
| 3815.12.00 | Granulated dendritic industrial silver catalyst | Dynochem NZ Ltd
C/- Alpha Customs Services
PO Box 360
NEW PLYMOUTH | 99 | 987094G | A |
| 3919.10.01 | CURRENT APPROVAL
Knitted viscose fabric tape with adhesive on both sides with a minimum tape width of 150mm in 25 metre roll lengths
REQUESTED APPROVAL
Knitted viscose fabric tape with adhesive on both sides with a minimum tape width of 125mm in 25 metre roll lengths | Walk Off Mats NZ Ltd
C/- Pengelly’s Wellington Ltd
PO Box 14-621
WELLINGTON | 99 | 820908B 987097A | V |
| 3920.10.09 | CURRENT APPROVAL
HD2 glass clear HDPE film (sclairfilm)
REQUESTED APPROVAL
HD2 glass clear HDPE and oriented LLDPE film (sclairfilm) | Du Pont NZ Ltd
7 Ronwood Ave
Manukau City
AUCKLAND | 99 | 540336H 987092L | V |
| 3926.90.59 | PVC stand up liners being covers of a type suited for use with water-bed mattresses | Vantage Enterprises Ltd
C/- PO Box 858
AUCKLAND | 99 | 987059J | A |
| 6602.00.09 | Hickory walking sticks | G M Lethaby
60 Mt Eden Road
Mt Eden
AUCKLAND | 99 | 987003C | A |
| 8302.10.00 | Steel hinges, rising type, consisting of two machined matching butts, of a type used in fire check doors | Winstone Speciality Products Ltd
C/- Profile International Ltd
PO Box 30-314
LOWER HUTT | 99 | 986867E | A |
| 8414.60.00 | Domestic fan filter units. For shipments specified only viz:
Contship Europe 30 July 1990 WN5005484,
Resolution Bay 2 August 1990 WN5005974,
Berlin Express 6 December 1990 WN5003177,
Artur Grotger 6 January 1991 WN5038510 | Comfort Control Ltd
C/- MSAS Cargo International Limited
PO Box 2427
WELLINGTON | 99 | 987081E | SS |
| 84.65 | CURRENT APPROVAL
Machine tools for working wood, cork, bone, hard rubber, hard plastic or similar hard materials:
EXCLUDING:

1. Saws benches with sawblades not exceeding 330mm
2. Radial arm saws, overhead crosscut saws, trenching machines and work centres incorporating a radial arm saw, with blade diameters up to and including 360mm diameter
3. Pendulum type crosscut saws including spida type for sawblades up to and including 450mm diameter
4. Thicknessers, with a width capacity up to and including 330mm
5. Surface planers, buzzers, or joiners with a blade not exceeding 310mm
6. Bandsaws with a throat capacity not exceeding 475mm
7. Wood lathes manually operated, with or without copy device
8. Horizontal dowel boring machines with manual feed
9. Drill presses bench or floor mounting, column type, belt driven, manually operated
10. Edgebanding machines which perform the following functions only viz: the application of preglued edging tape coils of PVC, melamine or wood veneer to hand fed panels by means of glue reactivation, with or without a tape front and/or end cut off function | | 99 | 980971G | V |