New Zealand Gazette – 1992 – No. 185

Page 4196

✨ Tariff Industry Assistance Notices



NEW ZEALAND GAZETTE

No. 185

TARIFF INDUSTRY ASSISTANCE (ADVERTISEMENT) NOTICE NO. 1992/43

Applications Advertised for Objection

Closing Date for Objections 8th December 1992

1 Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection must do so in writing, to the Ministry of Commerce, PO Box 1473, Wellington, Fax (04) 473-8949 indicated by the reference number, before 8th December 1992. All submissions must include:

  • the Tariff Industry Assistance (Advertisement) Notice number;
  • the Tariff item; and
  • Reference number.

2 All submissions from local manufacturers must include:

  • the range of alternative goods made locally;
  • the grounds on which objection is made (including reasons why the local product is a suitable alternative);
  • present and potential output;
  • details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.

3 All submissions objecting to a request for the withdrawal of a concession must include:

  • reasons why the local product on which protection is sought is not a suitable alternative;
  • full technical details of the goods against which tariff protection is sought.

4 Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Commerce quoting the details in paragraph 1 above.

5 Any submission not supported by the information required in the paragraphs above will be considered invalid.

Tariff Item Description of Goods Name and Address of Applicant Part II Ref. No. Category of Appln.
2106.90.09 Dried bean curd Tai Ping Trading Co Ltd C/- J A Barber & Co Ltd PO Box 858 AUCKLAND 99 988172H A
3801.30.00 CURRENT APPROVAL Soderberg electrode paste 99 801023E V
3801.30.00 REQUESTED APPROVAL Electrode paste NZ Steel Ltd C/- Burlington Ocean Express PO Box 1296 AUCKLAND 1 99 988150G V
3823.90.69 BL 60 (sodium aluminium phosphate/aluminium sulphate) Rhone Poulenc NZ Ltd PO Box 35-060 Naenae 99 988149C A
3823.90.69 Redicote AP (bitumen adhesion agent) LONER HUTT Polychem Marketing Ltd PO Box 6435 Wellesley Street AUCKLAND 99 988159L A
3916.90.00 Extruded profile of ABS/PVC alloy whether or not incorporating a flexible magnet Canterbury Aluminium Limited PO Box 18692 CHRISTCHURCH 99 988177J A
3926.90.69 Hand sander for attachment to vacuum with or without accessories Albany Johnson Marketing Ltd PO Box 18-314 AUCKLAND 6 99 988155H A
4823.90.19 CURRENT APPROVAL Paper cushion pads three to seven plies 99 660544D V
4823.90.19 REQUESTED APPROVAL Paper cushion pads – one to seven ply L M Wright & Co Ltd C/- Allied Customs Agents Ltd PO Box 504 DUNEDIN 99 988124H V
6805.10.19 Stitch bonded belting material with multi-directional inlaid joints Sanding & Grinding Specialities Ltd PO Box 100-249 North Shore Mail Centre AUCKLAND 10 99 988120E A
7323.99.00 CURRENT APPROVAL Domestic bakeware, teflon or silicone coated as may be approved:
  1. Baking trays and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.8cm x 29.2cm
  2. Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides; maximum diameter of 31.1cm
  3. 6 cup muffin pans, maximum muffin hole size of 7.6cm diameter
  4. Bread and loaf pans, oblong shaped only; maximum size 23.5cm x 13.3cm
  5. Heart shaped pans
  6. Covered roast pans 33cm x 22.9cm x 5.1cm deep
  7. Roast and bake pans 36.8cm x 26.7cm x 5.1cm deep
  8. Square bake pans 20.3cm x 20.3cm x 5.1cm deep
  9. Oblong cake pans 33cm x 22.9cm x 5.1cm deep
  10. Muffin pans 6 large cups 8.8cm diameter x 4.4cm deep
  11. Biscuit pans 27.3cm x 17.8cm x 3.8cm deep
  12. Round cake pans 20.3cm diameter x 3.8cm deep
  13. Round cake pans 22.9cm diameter x 3.8cm deep | | 99 983199B | V |
    | 7323.99.00 REQUESTED APPROVAL | Domestic bakeware, teflon or silicone coated as may be approved:
  14. Baking trays and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.8cm x 29.2cm
  15. Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides | Paramount Trading Co Ltd PO Box 73-111 AUCKLAND AIRPORT | 99 988122A | V |


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa — PDF NZ Gazette 1992, No 185


NZLII — PDF NZ Gazette 1992, No 185




✨ LLM interpretation of page content

🏭 Tariff Industry Assistance Advertisement Notice

🏭 Trade, Customs & Industry
Tariff, Industry Assistance, Applications, Objections

🏭 Applications for Tariff Industry Assistance

🏭 Trade, Customs & Industry
Dried bean curd, Electrode paste, Sodium aluminium phosphate, Bitumen adhesion agent, Extruded profile, Hand sander, Paper cushion pads, Stitch bonded belting, Domestic bakeware