NEW ZEALAND GAZETTE

No. 116

TARIFF INDUSTRY ASSISTANCE (ADVERTISEMENT) NOTICE NO. 1992/27

Applications Advertised for Objection

Closing Date for Objections 18th August 1992

1. Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection must do so in writing, to the Ministry of Commerce, PO Box 1473, Wellington, Fax (04) 473-8949 indicated by the reference number, before 18th August 1992. All submissions must include:

   -- the Tariff Industry Assistance (Advertisement) Notice number;
   -- the Tariff item; and
   -- Reference number.

2. All submissions from local manufacturers must include:

   -- the range of alternative goods made locally;
   -- the grounds on which objection is made (including reasons why the local product is a suitable alternative);
   -- present and potential output;
   -- details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.

3. All submissions objecting to a request for the withdrawal of a concession must include:

   -- reasons why the local product on which protection is sought is not a suitable alternative;
   -- full technical details of the goods against which tariff protection is sought.

4. Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Commerce quoting the details in paragraph 1 above.

5. Any submission not supported by the information required in the paragraphs above will be considered invalid.

PO Box 12-492
Penrose | 99 987549C | A |
| 3808.10 | IGR (insect growth regulator) grain protectant based on Methoprene | Auckland Trading Co Ltd
C/- PO Box 1804
CHRISTCHURCH | 99 987586C | A |
| 3823.90.69 | Anti-slip preparations of a type designed to seal pores of silaceous surfaces | Joe Jansen & Sons Ltd
PO Box 2807
AUCKLAND 1 | 99 987338E | A |
| 3906.90.01 | Mowilith LDM 7410 (a copolymer dispersion of acryli/methacrylic esters) | Hoechst NZ Ltd
PO Box 67
AUCKLAND | 99 987551E | A |
| 7312.10.00 | Swaged wire rope with a diameter range between 10mm and 36mm inclusive | John Shaw (NZ) Ltd
PO Box 73-111
AUCKLAND AIRPORT | 99 987569H | A |
| 7321.12.00 | Oil fired domestic cast iron cooker with self contained boiler with an output exceeding 7500 BTU/HR | F L Bone & Son Ltd
C/- Hammond International Ltd
PO Box 1011
NAPIER | 99 987555H | A |
| 7323.99.00 | CURRENT APPROVAL
Domestic bakeware, teflon or silicone coated as may be approved:

APPROVED:

1. Baking trays and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.8cm x 29.2cm
2. Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides; maximum diameter of 31.1cm
3. 6 cup muffin pans, maximum muffin hole size of 7.6cm diameter
4. Bread and loaf pans, oblong shaped only; maximum size 23.5cm x 13.3cm
5. Heart shaped pans
6. Covered roast pans 33cm x 22.9cm x 5.1cm deep
7. Roast and bake pans 36.8cm x 26.7cm x 5.1cm deep
8. Square bake pans 20.3cm x 20.3cm x 5.1cm deep
9. Oblong cake pans 33cm x 22.9cm x 5.1cm deep
10. Muffin pans 6 large cups 8.8cm diameter x 4.4cm deep
11. Biscuit pans 27.3cm x 17.8cm x 3.8cm deep
12. Round cake pans 20.3cm diameter x 3.8cm deep
13. Round cake pans 22.9cm diameter x 3.8cm deep | 99 983199B | V |
    | 7323.99.00 | REQUESTED APPROVAL
    Domestic bakeware, teflon or silicone coated as may be approved:

APPROVED:

1. Baking trays and sheets being flat bakeware with up to 2.5cm sides; maximum size 43.8cm x 29.2cm
2. Pizza pans and crispers being round trays with or without holes in bottom and up to 1.3cm high sides; maximum diameter of 31.1cm
3. 6 cup muffin pans, maximum muffin hole size of 7.6cm diameter
4. Bread and loaf pans, oblong shaped only; maximum size 23.5cm x 13.3cm
5. Heart shaped pans
6. Covered roast pans 33cm x 22.9cm x 5.1cm deep
7. Roast and bake pans 36.8cm x 26.7cm x 5.1cm deep
8. Square bake pans 20.3cm x 20.3cm x 5.1cm deep
9. Oblong cake pans 33cm x 22.9cm x 5.1cm deep
10. Muffin pans 6 large cups 8.8cm diameter x 4.4cm deep
11. Biscuit pans 27.3cm x 17.8cm x 3.8cm deep
12. Round cake pans 20.3cm diameter x 3.8cm deep
13. Round cake pans 22.9cm diameter x 3.8cm deep | Jonathan Enterprises Ltd
    C/- National Customs & Travel Consultants Ltd
    PO Box 22329
    Otahuhu
    AUCKLAND | 99 987577J | V