Customs Tariff Notices




30 APRIL CUSTOMS EDITION 1421

Tariff Industry Assistance (Advertisement) Notice No. 1991/15—continued

| Tariff Item | Description of Goods | Name and Address of Applicant | Part II Ref. No. | Appn. Category of -
of -

|-------------|----------------------|--------------------------------|------------------|------------------|
| 6305.31.09 | Knitted polyethylene rachel knitted bags | Burlington Customs Brokerage
PO Box 1296
AUCKLAND | 99 | TCU 984053C A |
| 6403.19.11 | CURRENT APPROVAL
6403.99.18 | Cycle racing footwear | | 99 | 7033598 VA |
| 64.02) | REQUESTED APPROVAL
64.03)
64.04) | Cycle racing footwear | Ninnes Sports Ltd
C/- PO Box 3230
AUCKLAND | 99 | TCU 985392J VA |
| 8404.19.19 | Mukluks (polar boots) – Asics type F-DX | DSIR Antarctic Division
C/- Pengelly’s
PO Box 14621
Kilbirnie
WELLINGTON | 99 | TCU 982728F A |
| 7117.19.00 | CURRENT APPROVAL
7117.00.19 | Jewellers findings | | 99 | 680050F VA |
| Section VII | REQUESTED APPROVAL
Section XIV | Jewellers findings | Prints & Imports Ltd
C/- Prestige Customs Services Ltd
PO Box 35-489
Browns Bay
AUCKLAND | 99 | TCU 984658B VA |
| Section XV | CURRENT APPROVAL
| Plugs, clips and similar fittings peculiar to use by builders for fixing articles to concrete or plaster EXCLUDING:
Drop in Masonry Flush Anchors made from stainless or mild steel with internal thread diameter from 6.00mm to 20mm
Concrete Inserts stainless or mild steel with internal thread diameter 6.00mm to 24mm
Self Drilling Masonry Anchors with internal thread diameter from 6.00mm to 20mm
Expansion Sleeve Anchors, Hex Nut, Flat Head, Round Head, Tie Wire, Setlock and made from heat treated, high tensile or mild steel with a diameter from 6.00mm to 20mm
Heavy Duty Stud Anchors, made from mild or stainless steel in diameters 6.00mm to 24mm with an overall length from 45mm up to and including 250mm
Drive Pins for power actuated tools with shank diameters from 2.00mm to 4.5mm with an overall length from 20mm up to and including 100mm
Hardened Concrete Nails of shank diameters from 2.00mm to 4.5mm with an overall length from 15mm to 100mm | | 99 | 981949F VA |
| Section XV | REQUESTED APPROVAL
| Plugs, clips and similar fittings peculiar to use by builders for fixing articles to concrete, plaster, plaster board etc EXCLUDING:
Concrete Inserts stainless or mild steel with internal thread diameter 8.00mm to 24mm
Self Drilling Masonry Anchors with internal thread diameter from 6.00mm to 20mm
Expansion Sleeve Anchors, Hex Nut, Flat Head, Round Head, Tie Wire, Setlock and made from heat treated, high tensile or mild steel with a diameter from 6.00mm to 20mm
Heavy Duty Stud Anchors, made from mild or stainless steel in diameters 6.00mm to 24mm with an overall length from 45mm up to and including 250mm
Drive Pins for power actuated tools with shank diameters from 2.00mm to 4.5mm with an overall length from 20mm up to and including 100mm
Hardened Concrete Nails of shank diameters from 2.00mm to 4.5mm with an overall length from 15mm to 100mm | Alan H Reid Engineering Ltd
PO Box 60-112
Titirangi
AUCKLAND 7 | 99 | TCU 985543C VA |
| 7307.29.11 | Barbed pipe fittings in low sulphur content 300 series stainless steel | Crown Equipment Ltd
C/- PO Box 2658
AUCKLAND 1 | 99 | TCU 985485B A |
| 7308.30.00 | Roll formed 115mm steel folding door panels | Nom Door (NZ) Ltd
C/- Sourced Customs Ltd
PO Box 100-150
North Shore Mail Centre
AUCKLAND | 99 | TCU 983127E A |
| 7326.90.09 | Flame arresters of a type used for insertion into pipelines | Gas Services Ltd
PO Box 3854
AUCKLAND | 99 | TCU 985482N A |
| 7326.90.09 | Galvanised steel panel anchors being perforated 20 gauge strip 24'' x 1 ½'' | George Forman & Sons Ltd
PO Box 12149
Penrose
AUCKLAND | 99 | TCU 984479B A |
| 7606.12.09 | Coiled sheet, alloys 5005 and 5251, O temper, thickness 3.125mm, width 1260mm. Limited to 18 tonnes on TE 1210870115 shipments MV Prospect | Alcan New Zealand Ltd
PO Box 308
WELLINGTON | 99 | TCU 985475E A |
| 7606.12.09 | Coiled sheet as hot rolled, temper M, thickness 4.0mm, alloys 1200, 5005, 5251 and 5454, internal coil diameter 500mm | Alcan New Zealand Ltd
PO Box 308
WELLINGTON | 99 | TCU 985476C WA |



Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1991, No 63


NZLII PDF NZ Gazette 1991, No 63





✨ LLM interpretation of page content

🏭 Customs Notices Including Tariff Industry Assistance (continued from previous page)

🏭 Trade, Customs & Industry
Customs, Tariff, Industry Assistance, Applications, Objections