✨ Buttercup Squash Export Standards
NEW ZEALAND GAZETTE
No. 173
3586
defects which may cause rapid loss of condition or rapid decay.
3.6 ‘Storage Defects’ means decay, fungal rots, wilt or other injury as a result of storage.
3.7 ‘Sunburn’ means injury from exposure to the sun which results in sunken white areas of damaged flesh.
3.8 ‘Trimmed’ means the stalk is cut cleanly and is less than 20 mm long or does not protrude more than 10 mm above the shoulder of the squash.
The buttercup squash must be:
4.1 Free from pests and diseases and meet any quarantine and other legal requirements of the importing country;
4.2 Intact, whole;
4.3 Sound—free from storage defects or any other defects which may impair their general appearance or keeping quality;
4.4 Clean—free from soil, practically free of any other visible foreign matter;
4.5 Free from abnormal external moisture;
4.6 Free from foreign smell or taste;
4.7 Mature;
4.8 Trimmed;
4.9 Cured;
4.10 Of good quality, with similar varietal characteristics including shape and colour and without distortion due to abnormal development;
4.11 Capable of withstanding handling, storage and transport, and arriving at the destination in a sound condition;
4.12 Free from sunburn and scald;
4.13 Buttercup squash should be shipped within 14 days of harvesting.
Skin defects which are not liable to impair the keeping qualities are permitted within the limits specified in the Third Schedule to this notice.
Schedule Two
- Provisions concerning sizing, tolerance and presentation:
5.1 Provisions concerning sizing—Sizing is determined by weight at the time of packing. The minimum size for export in bulk packs is 1.2 kg and above which should be marked Grade 1.
Note: Squash in the size range of 1 kg up to 1.2 kg only is permitted as a separate pack which must be marked accordingly and checked for maturity prior to export.
5.2 Tolerance—Any one package shall not contain more than 5 percent of buttercup squash by weight outside the branded size range.
5.3 Presentation:
(a) Uniformity—The contents of each package must be uniform; each package must contain only buttercup squash of the same origin, variety, quality, degree of ripeness and size. The visible part of each package must be representative of the entire contents.
(b) Packaging—The buttercup squash must be packed in clean new packages substantially free of fungi and all other foreign material and in such a way to ensure that they are suitably protected.
Packages must be free of all foreign matter.
(c) Export bin specifications—All export squash are to be exported in wooden bins that meet the specifications and dimensions, as set out in the Fourth Schedule to this notice.
Schedule Three
- Allowances for defects:
6.1 Soil bleaching (groundspot)—No more than 15 percent of the surface area on individual squash.
6.2 Discolouration (bronzing)—The result of exposure to the sun. Where the colour of the affected area is still predominantly green the squash is acceptable. Where a brown or bronzed colour is dominant in the affected area the squash is unacceptable.
6.3 Vine marks—The vine must not have substantially distorted the outline or shape of the squash. A vine mark must be:
(a) No deeper than 20 mm from the normal surface of the squash at the deepest point.
(b) No wider than 20 mm at the widest point.
(c) No longer than 100 mm.
6.4 Callousing—Surface callousing (i.e. non-raised areas) is not to exceed 4 square cm in aggregate on all fruit from 1.2 kg up to 2 kg in weight, and 6 square cm in aggregate on all export fruit above 2 kg. Callousing with raised areas such as “pimples” or oedema (“warts”) is not to exceed 2 square cm in aggregate area and 5 mm in height at any point.
6.5 Bruising—Marks resulting from pressure must not:
(a) Have broken green skin.
(b) Exceed 2 square cm in aggregate area.
6.6 Cuts are not acceptable on squash—Cuts are broken skin which may be caused by cutting (knives, secateurs) or impact on a sharp edge (stalks, timber, metal).
6.7 Dirty fruit—soil, grease, bird droppings or other foreign matter on the fruit is not acceptable.
6.8 Shape—The squash must be wider than it is high, and typical of the variety.
6.9 Shrinkage (weight loss)—Shrinkage allowance of 7 percent of net weight at the time of dispatch is to be provided for.
6.10 External moisture—All fruit are to be substantially free of external moisture (water from washing procedures) prior to storage for export shipment.
Schedule Four
- Provisions concerning packaging:
7.1 Reefer vessel bins
(a) Timber lengths for front and back 1.18 m
(b) Timber lengths for pallet base 1.22 m
(c) Timber lengths for bin caps 1.22 m
(d) Timber lengths for sides 1.02 m
(e) Timber lengths for corners 0.920 m
(f) Timber lengths for base bearers 1.02 m
To be manufactured in compliance with clause 7.4.
7.2 Door off dry container bins—All bins are to be of a size that allows twenty bins of the same dimensions per twenty foot dry sea container.
To be manufactured in compliance with clause 7.4.
7.3 Reefer container bins.
To be manufactured in compliance with clause 7.4.
7.4 Bin and timber specifications for all bins:
7.4.1 Timber.
Pine, Douglas Fir, Tanekaha, new (clean, unused), bark-free, air seasoned (maximum of 25% moisture content) or anti-sap stain treated.
7.4.2 Construction side boards:
(a) Minimum thickness 18 mm or 15 mm with vertical stays. (Vertical stays remain in the centre of all sides, four at minimum of 15 mm by 50 mm bevelled.)
(b) Minimum width 95 mm.
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1991, No 173
NZLII —
NZ Gazette 1991, No 173
✨ LLM interpretation of page content
🌾
Standard Grade for Export of Buttercup Squash
(continued from previous page)
🌾 Primary Industries & ResourcesButtercup Squash, Export Standards, Agriculture, Fruit and Vegetables, Quality Control