✨ Tariff Concession Notices




2258

NEW ZEALAND GAZETTE

No. 102

Tariff Act 1988

TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 25) 1991

I, Vincent Anthony Manks, Executive Officer, Ministry of Commerce, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:

(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and

(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe; and

(c) Withdraw with effect fourteen days from the date of this notice the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice; and

(d) Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.

FIRST SCHEDULE
Concessions Approved

Tariff Item Description of Goods Rates of Duty Normal Pref. Part II Ref. Ref. No. Effective From To
1603.00.01 Chicken extrudate Free Free 99 985587E 4/91 ..
3917.32.08 Polyethylene irrigation hose 90mm OD to 140mm OD Free Free 99 985585D 4/91 ..
3926.90.88 Dual purpose flexi hoops Free Free 99 985568J 3/91 ..
4009.50.19 Ship to ship fuel transfer hose, reinforced, with fittings attached Free Free 99 984204H 10/90 ..
7016.10.00 Glass mosaic tiles Free Free 99 700602A 1/88 ..
Plugs, clips and similar fittings peculiar to use by builders for fixing articles to concrete or plaster Free Free 99 981949F 3/90 ..
EXCLUDING:
Drop in Masonry Flush Anchors made from stainless or mild steel with internal thread diameter from 6.00mm to 20mm
Concrete Inserts stainless or mild steel with internal thread diameter 6.00mm to 24mm
Self Drilling Masonry Anchors with internal thread diameter from 6.00mm to 20mm
Expansion Sleeve Anchors, Hex Nut, Flat Head, Round Head, Tie Wire, Setlock and made from heat treated, high tensile or mild steel with a diameter from 6.00mm to 20mm
Heavy Duty Stud Anchors, made from mild or stainless steel in diameters 6.00mm to 24mm with an overall length from 45mm up to and including 250mm
Drive Pins for power actuated tools with shank diameters from 2.00mm to 4.5mm with an overall length from 20mm up to and including 100mm
Hardened Concrete Nails of shank diameters from 2.00mm to 4.5mm with an overall length from 15mm to 100mm
7321.83.00 Solid fuel stove with self contained boiler Free Free 99 985584F 4/91 ..
7326.90.09 Fish baiting system and storage racks Free Free 99 985673E 3/91 ..
Chapter 84 Catalogued or identifiable parts of machines may be admitted under the Part II duty concession granted in respect of the parent machine. Catalogued or identifiable parts of machines which in their own right are entitled to duty free entry under Part I of the Tariff are also covered by this concession. This applies regardless of Tariff classification with the following exceptions;
(1) Parts of general use
(2) Any part which is the subject of a specific Determination of the Minister
(3) Ball, needle and roller bearings
(4) Electric motors
(5) Fans and blowers
(6) Parts of machines approved for entry under Part II concessions 20, 60, 70, 80, 81
(7) Buckets, shovels and grabs and parts thereof
(8) Hydraulic hoses with fittings attached
(9) Articles of needleloom felt
(10) Interchangeable tools, e.g., tool bits, saw blades, grinding wheels
(11) Tyres and tubes
(12) Electric accumulators
(13) Electric lamps and tubes
(14) Knives and cutting blades
(15) Engines
(16) Transmission shafts β€” flexible
(17) Spark plugs
(18) Computer printer, typewriter, calculator, cash register and similar machine ribbons
(19) Oil, air and fuel filters for internal combustion engines exceeding 20 gross bhp except as may be approved. A list of approved filters is held by the Collector of Customs, Auckland, Wellington, Christchurch
8422.30.09 Maize seed two stage bag filling machine complete with vibrator, dribble feed and digital weighing mechanism for up to 35kg Free Free 99 985570L 4/91 ..
8423.89.00 Electronic on board scales being a weighing system mounted on trucks for weighing loads Free Free 99 985572G 4/91 ..
8424.30.00 Etching machines Free Free 99 985569G 4/91 ..
8479.10.00 Smoke blinds designed for use in prevention of smoke spreading in buildings Free Free 99 983431B 8/90 ..
8479.89.00 Commercial vehicle washers for heavy industrial vehicles only Free Free 99 984533L 12/90 ..
8515.80.09 Portable ultrathermic cutting kits Free Free 99 985111K 2/91 ..
8516.79.19 Yoghurt maker, electric Free Free 99 984195E 11/90 ..


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1991, No 102


NZLII PDF NZ Gazette 1991, No 102





✨ LLM interpretation of page content

🏭 Tariff Concession Approvals, Withdrawals and Declines Notice (No. 25) 1991 (continued from previous page)

🏭 Trade, Customs & Industry
Tariff, Concessions, Approvals, Withdrawals, Declines, Goods, Import
  • Vincent Anthony Manks, Executive Officer, Ministry of Commerce