NEW ZEALAND GAZETTE

No. 41

Tariff Industry Assistance (Advertisement) Notice No. 1990/10 - cont'd

(21) Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity

(22) Swaging and crimping machines

(23) Metal cutting bandsaws in vertical positions with a maximum cutting throat depth up to 450mm

N.B. Any multi-purpose or composite machines incorporating any of the functions above are excluded from this concession.

REQUESTED APPROVAL

84.59

84.60 Machine-tools for working metal or metal carbides, not being machines falling within heading No. 84.49 or 84.50:

EXCLUDING:

(1) Bandsaws, with a maximum cutting capacity in the horizontal position, 35° or 90° as follows:

• solid mild steel bar 175mm diameter
• solid mild steel bar 125mm diameter at 35°
• flat bar up to 430mm wide x 260mm high
• cutting at 90° flat bar up to 260mm wide x 260mm high excluding:
  • automatically controlled bandsaws

(2) Box and plan folders, hand operated

(3) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width

(4) Chain saw sharpeners

(5) Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill

(6) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel.

(7) Dualfoam hydraulic press with facility to cast its own tools models 5E, 6, 7, 8 and 9

(8) Machinery, peculiar for use in making and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity:

• cutting 76.1mm diameter;
• expanding, 76.1mm;
• bending, 19mm-76mm; and
• forming bends of 60mm-140mm radii;

EXCLUDING:

• numerically controlled machine tools

(9) Metal circular saws hand operated not exceeding 1016mm diameter excluding types specially suited for cutting precious metals

(10) Metalworking guillotines and shears, excluding:
(a) types specially suited for use in the photo-processing and engraving trade for cutting zinc, magnesium and copper sheets
(b) Reinforced steel bar cropping machines, with capacity exceeding 20mm
(c) Types with a straight cutting edge of 105mm or less

(11) Metal hacksaws with a rated square material cutting capacity of which any one measurement is 280mm or less, excluding automatically controlled hacksaws

(12) Metalworking presses (other than those having a top roll diameter of 255mm or more and a bottom roll of 195mm) and press brakes (including coil cradle straighteners)

(13) Presses, hydraulic

(14) Presses, mechanical, power operated and other, exceeding 30.5 tonnes but not exceeding 35 tonnes capacity

(15) Presses, mechanical, power operated and other, not exceeding 30.5 tonnes capacity

(16) Punch crop and rivet presses, not exceeding 3.05 tonnes capacity

(17) Rod reinforcing steel cutters, not exceeding 20mm mild steel capacity

(18) Roll forming machines, including continuous spouting and continuous ridging machines

(19) Shearing, punching and notching machines, hand and hydraulically operated

(20) Sheet metal folding machines

(21) Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity

(22) Sheet metal swaging and crimping machines

(23) Metal cutting bandsaws in vertical positions with a maximum cutting throat depth up to 450mm

N.B. Any multi-purpose or composite machines incorporating any of the functions above are excluded from this concession.

8481.80.19 Aluminium bodied air or gas-line couplings

Lydon Machine Tools
PO Box 243
PAPAKURA
AUCKLAND

99 HO ICU 981625K VA

Parker Hannifin NZ Ltd
PO Box 58 233
Greenmount
AUCKLAND

99 HO ICU 980840L A

8516.29.09 Long wave radiant floor/wall heaters

Bengtsson Trading Co. Ltd
C/- Banner Tariff & Trade Consultants
PO Box 1744
WELLINGTON

99 HO ICU 981115L A

8529.90.11 Nikon circuit boards

Sharp Corporation of NZ
C/- MSAS Cargo Int'l Ltd
PO Box 357
AUCKLAND

99 HO ICU 981690K A

8536.69.00 16 amp to 125 amp plugs and sockets to CEE17-IEC 309-1 and IEC 309-2

Oram & Co New Zealand
PO Box 9388
WELLINGTON

99 HO ICU 980208J A

• Category of Application:
  • A - Application for Approval
  • VA - Application for Variation of Approval
  • WA - Application for Withdrawal of Approval