New Zealand Gazette – 1990 – No. 21

Page 406

✨ Tariff Concession Notices



NEW ZEALAND GAZETTE

No. 21

TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 5) 1990

I, Michael Richard Turner, Concessions Supervising Officer, Ministry of Commerce, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby—

(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified;

(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe; and

(c) Withdraw with effect Fourteen days from the date of this notice the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice; and

(d) Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.

FIRST SCHEDULE

Concessions Approved

Tariff Item Description of Goods Rates of Duty Part II Ref. No. Effective From To
Normal Pref.
H0 ICU 2402.20.00 Non-woven bonded fibre cleaning tissue soaked in distilled water and non-toxic non-flammable bio-degradable solvent based cleaning fluid Free Free 99 981097J
H0 ICU 3808.30.08 Benzalkonium Free Free 99 980434L
H0 ICU 3921.90.19 Laminated phenolic resin sheet reinforced with paper, textile or glass fabric Free Free 99 980994F
H0 ICU 3923.30.00 Fluorinated plastic containers, 1 litre, 2 litre, 5 litre and 10 litre capacity Free Free 99 981096L
H0 ICU 3924.10.09 Removable plastic pourer for 1 litre cartons of beverage Free Free 99 980977F
H0 ICU 3926.90.69 Plastic components for electric motors Free Free 99 980987C
H0 ICU 61.15 Anti emboliism stockings Free Free 99 981101L
H0 ICU 61.16 Ladies fashion gloves Free Free 99 981173A
H0 ICU 6805.20.19 Natural or artificial abrasive powder on paper base Free Free 99 980604A
H0 ICU 7326.90.09 Galvanised high tensile oval ball eyes Free Free 99 981089H
H0 ICU 7326.90.09 Galvanised steel Y clevis tongues Free Free 99 991089K
H0 ICU 7616.90.19 Cast aluminium outboard mounting transom plate for inflatables/boats Free Free 99 981107K
H0 ICU 7616.90.29 Sealing machine clips Free Free 99 981095B
H0 ICU 8414.10.09 Rotary and side channel, lubricated and oil-less vacuum pumps and combined pressure/vacuum pumps, excluding rotary vacuum pumps between 0.75 L/S and 5.0 L/S with an ultimate vacuum of better than and including 0.4 mbar (0.3 torr, 300 microns) Free Free 99 880799D
H0 ICU 8414.10.09 Sliding vane rotary and diaphragm type vacuum pumps, excluding rotary vacuum pumps between 0.75 L/S and 5.0 L/S with an ultimate vacuum of better than and including 0.4 mbar (0.3 torr 300 microns) Free Free 99 880796F
H0 ICU 8424.89.19 Hand operated water blasting machines with an output not exceeding 0.4 m bar (0.3 torr 300 microns) Free Free 99 980985V
H0 ICU 8428.90.00 Container/pallet loader for aircraft Free Free 99 980747K
H0 ICU 84.65 Machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials; excluding: hard plastic or similar hard materials:

EXCLUDING:

  1. Saubenchers with sawblades not exceeding 330mm
  2. Radial arm saws, overhead crosscut saws, trenching machines and work centres incorporating a radial arm saw, with blade diameters up to and including 360mm diameter
  3. Pendulum type crosscut saws including sliding type for sawblades up to and including 450mm diameter
  4. Thicknessers, with a width capacity up to and including 330mm
  5. Surface planers, buzzers, or joiners with a blade not exceeding 310mm with a throat capacity not exceeding 475mm
  6. Wood lathes manually operated, with or without copy device
  7. Horizontal dowel boring machines with manual feed
  8. Drill presses bench or floor mounting, column type, belt driven, manually operated
  9. Edge banding machines which perform the following functions only viz:- the application of preglued edging tape coils of PVC, melamine or wood veneer to hand fed panels by means of glue reactivation, with or without a tape front and/or end cut off function
    (Edge banding machines which have additional functions to those specified above will qualify for this concession provided the additional functions are relevant to edgebanding machines and are catalogued as being for the edgebanders concerned)
  10. Tenoning machinery
  11. Panel saws including sliding table panel saws
  12. Circular breakdown saws
  13. Docking saws
  14. Log cut-off swing saws
  15. Post peelers
  16. Splitting saws
  17. Vertical breakdown saws
  18. Wood debarking machines, Kasser head not exceeding 1425mm diameter and ring type not exceeding 1275mm diameter
  19. Hydraulic wood or log splitters
  20. Machine-tools for bending hard plastic
  21. Any composite or multipurpose machine incorporating any of the above excluded machinery or combination of the above excluded machinery | Free | Free | 99 | 980971G | 9/89 ...


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa — PDF NZ Gazette 1990, No 21


NZLII — PDF NZ Gazette 1990, No 21




✨ LLM interpretation of page content

🏭 Tariff Concession Approvals, Withdrawals and Declines Notice

🏭 Trade, Customs & Industry
Tariff, Concessions, Approvals, Withdrawals, Declines
  • Michael Richard Turner, Concessions Supervising Officer, Ministry of Commerce