✨ Tariff Industry Assistance Notices
NEW ZEALAND GAZETTE
No. 99
Tariff Industry Assistance (Advertisement) Notice No. 1083/21—continued
| Tariff Item | Description of Goods | Name and Address of Applicant | Part II Ref. No. | Appn. Category of Appn. |
|---|---|---|---|---|
| 8544.11.01 | Copper winding wire insulated with lacquer or enamel under 0.160mm and over 1.60mm diameter | WELLINGTON |
Coils Specialists NZ Ltd
PO Box 2365
TAURANGA | 99 | 780894B A |
| 8704.10.00 | TMAD22LM series Nissan diesel dump truck complete with 8m³ U section dump body | Nissan New Zealand Ltd
PO Box 61133
OTARA | 99 | AK 703186G A |
| 8714.20.00 | Parts and accessories for ortho kinetic travel chairs | AUCKLAND
Group Pharmaceuticals Ltd
C/- G.N. Bowman, Tariff Consultant
Colebrook Bros Ltd
PO Box 1296
AUCKLAND | 99 | AK 703225A A |
Chapter 90
CURRENT APPROVAL
Electrical measuring, checking, analysing or automatically controlling instruments and apparatus:
EXCLUDING:
(1) Electric current controllers/indicators, up to 240v
(2) Frequency meters, flush mounting pointer type with circular or quadrant scales, accuracy class of 0.5 and having face size of 72mm or 96mm square
(3) Milk cryoscopes
(4) Moving coil and moving coil/rectifier ammeters and voltmeters, including microammeters, milliammeters and D.C. millivoltmeters for use with external shunts, flush mounting horizontal sector scales, accuracy class 2.5 and having body diameter of between 54 and 70mm
(5) Moving coil and moving coil/rectifier ammeters and voltmeters, including milliammeters and D.C. millivoltmeters, for use with external shunts, flush mounting with circular or quadrant scales accuracy class 1.5 and having face size of 72mm or 96mm square
(6) Moving iron ammeters and voltmeters including milliammeters, flush mounting and quadrant scales to accuracy class 1.5 and having face size of from 72mm to 144mm square inclusive
(7) Temperature, pressure, humidity and moisture control and measuring devices
(8) Industrial type batch and predetermining batch counters, but not including digital electronic frequencies above IMHz
(9) Variable speed controllers for A.C. motors, sizes up to and including 255 kw
(10) Data logging systems designed for the measuring, indicating of physical data such as temperature, humidity, voltage, current, power and flow pressure
EXCLUDING:
Public water supply data logging equipment.
(11) Echo-sounding, ultra-sonic and detecting equipment having a maximum depth range of up to 110m, excluding hermetically sealed units
(12) Bin and hopper level control instruments and apparatus
(13) Electronic differential thermostat switches designed to monitor or control the flow of gases, liquids or solids in the control of forced circulation solar heating systems, controlling loads up to 10hp or 7.5 kilowatts resistive
(14) Electronic marine instruments for recording boat speed and distance other than Decca logs and Seafarer logs
(15) Energy management systems, particular to use for measuring, analysing and controlling electrical demand
(16) Gas detection systems, peculiar to use in commercial and/or industrial environments, which measure and report concentrations of flammable or toxic gases in the air via alarm and/or analogue
(17) Moving iron ammeters and voltmeters, flush mounting quadrant scale, to accuracy class 1.5 and having face sizes from 72mm to 144mm square
(18) Moving coil and moving coil/rectifier ammeters and voltmeters, flush mounting, having face areas of between 5184 square millimetres and 3218 square millimetres and having sector, quadrant or circular scales
NOTE: circular, sector and quadrant type scales are illustrated in Fig. 2 on pages 11 and 12 of BS 3693, PART 1, 1964, ‘The Design of Scales and Indexes.’
(19) Portable electrically powered gas leak detector and gas monitor; and smoke warning alarms
(20) Post payment self-service petrol dispensing systems
(21) Power factor correction systems, including power factor controllers and ancillary equipment mounted in a common cubicle and designed to measure and automatically control the overall power factor in a 3-phase electrical installation, and such power factor controllers when imported separately
(22) Telemetry system designed for the remote control measuring and indicating of physical and electrical data
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1988, No 99
NZLII —
NZ Gazette 1988, No 99
✨ LLM interpretation of page content
🏭
Applications for Tariff Industry Assistance
(continued from previous page)
🏭 Trade, Customs & IndustryTariff, Industry Assistance, Applications, Customs, Metalworking Machinery, Tools, Woodworking Machinery, Copper Winding Wire, Nissan Diesel Dump Truck, Ortho Kinetic Travel Chairs
🏭 Current Approval for Electrical Measuring Instruments
🏭 Trade, Customs & IndustryElectrical Instruments, Measuring Devices, Approval, Exclusions, Data Logging, Energy Management, Gas Detection