Tariff Industry Assistance Decisions




NEW ZEALAND GAZETTE

No. 171

TARIFF INDUSTRY ASSISTANCE (DECISION) NOTICE NO. 1988/38

Decisions of the Minister of Customs in respect of Part I and Part II of the Customs Tariff

  1. Notice is hereby given that the following decisions have been made in respect of the goods published in the Schedules to this notice.

  2. SCHEDULE 2 – Decisions approved otherwise specified, eg, WFD (date). The cancellations listed in this schedule take effect fourteen days from Gazette date unless otherwise specified.

  3. SCHEDULE 3 – Limited Decisions

    (a) Approvals given under Schedule 3 are restricted to the applicant for whom the approval was originally given and are not available for general use.

    (b) This Notice only serves to inform the importing/manufacturing community of the approvals existence.

    (c) Schedule 3 and 4 will not be published in the Consolidated list of Decisions.

  4. It should be noted that any concession or determination can be subject to amendment or cancellation by notification in the Gazette.

  5. Where the month of the start date and end date is shown the day of the start date is the first day of that month and the end date is the last day of that month – eg, 3/8/88 to 30/9/88 is 1/3/88 to 30/9/89.

SCHEDULE 1

General Decisions Approved

Tariff Item Description of Goods Rates of Duty Part II Ref. No. Effective From To
Normal Pref.
10.04.14.01 Tuna exported from New Zealand and reimported after canning Free Free 99
AK 2309.10.19 Feedstock, foodstuffs and pharmaceutical vitamin canning compounds, as may be approved: APPROVED: Dohyfral K3 Dophusal D3-500 Roche vitamin B12 1% Feedgrade Free Free 99
2309.90.19 Rovimix B-2 Free Free 99
WN 3003.90.09 Soliar-vit Free Free 25
WN 3004.20.09 Negram tablets Free Free 25
AK 3304.20.00 Cosmetic pens and/or pencils viz: eye and eyebrow Free Free 99
AK 3305.10.00 Prioderm cream shampoo Free Free 99
AK 3402.90.00 Phenyl Sulphonate 2842 Free Free 99
AK 3808.20.20 Karathane WD Free Free 99
AK 3920.42.20 Chemical resistant flexible PVC tank lining sheeting – 2, 3 and 4.8mm thick and bending Free Free 99
WN 3924.10.00 Pre-sterilized disposable liquid feeding containers Free Free 99
AK 3928.90.80 Flexible marine PVC zip-seal cable fairings Free Free 99
DN 3928.90.80 Inflatable pillow and cushion Free Free 99
DN 3928.90.80 Pneumatic air beds Free Free 99
AK 3928.90.80 Polyethylene injection moulded cellular louvre panels with parabolically shaped cell walls Free Free 99
DN 4009.50.19 Rubber high pressure inlet hoses with fittings attached, excluding those used in underwater diving equipment Free Free 99
AK 4808.30.00 Creped kraft paper, weighing not less than 100 g/m² Free Free 99
AK 4823.11.00 Gummed adhesive paper in rolls of a thickness of 0.05mm to 0.1mm and a width of 8mm Free Free 99
AK 4823.80.00 Round, waxed, disposable paper board containers between 16cm and 17cm in height with a minimum rim diameter of 13cm Free Free 99
AK 4823.90.19 Photograph album pages viz: Self adhesive, coated with clear overlay Paper based, flip type pockets Polypropylene pockets, laminated to card Free Free 99
AK 4823.90.19 Temperature indicating tapes, other than self-adhesive Free Free 99
AK 5607.50.11 Polyester sewing braids with lubricated finish for use in the manufacture of footwear Free Free 99
AK 5607.50.19 Handknotted rugs of pure silk Free Free 99
DN 5806.32.00 Tartan name tag ribbon Free Free 99
DN 5806.39.00 Other printed textile articles viz wall hangings Free Free 99
CH Chapter 64 Sports footwear as approved: APPROVED: Boxing and wrestling boots Fencing, weightlifting, racing flats and shot put shoes Free Free 99
WN 6807.10.00 Rubber torch HP400 sand surfaced roofing being a polyester based weatherproofing membrane Free Free 99
AK 6809.19.00 Gypsum board sheets backed with aluminium foil 25.5 CA 10 LDC 10 99
CH 7019.90.09 Silicone coated glass braided insulating sleeve Free Free 99
AK 7209.32.00 Cold rolled sheet 686mm x 889mm and 578mm x 869mm, 1.6mm thick, extra deep drawing SPCEN-SD, oiled, to JISG 3141 Free Free 99
AK 7308.40.19 Welded 316 stainless steel tubing to ASTM A-269 insulated with aluminium/mylar tape, 12mm I.D. Free Free 99
DN 7318.15.08 Bolts to suit axle and suspension assemblies Free Free 99
AK 7326.90.09 Steel hose clamps and hose clips Free Free 99
AK 8407.00.00 Pevter tableware Free Free 99
AK 8408.10.09 Cummins BETA 5.9 marine water cooled diesel engine Free Free 99
AK 8408.10.09 Watercooled engines, as may be approved: APPROVED: An engine for which the original engine manufacturer obtains a certificate certifying it as complying with a national Standard Specification, internationally acceptable and attaining its maximum continuous shaft kilowatt rating under either D1N6270 (rating A) or BS649: 1958 or SAE J1818, at an engine speed not exceeding 2000 rpm. An engine for which the original engine manufacturer obtains a certificate certifying it as complying with a national Standard Specification, internationally acceptable and attaining its...


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1988, No 171


NZLII PDF NZ Gazette 1988, No 171





✨ LLM interpretation of page content

🏭 Applications Advertised for Objection (continued from previous page)

🏭 Trade, Customs & Industry
6 October 1988
Tariff Industry Assistance, Applications, Objections, Goods, VDU optical quality glass panel, Acoustic processor systems, Liquid petroleum gas level indicators, Rochester level gauges, Acid powered clock, Sealed bubble lamp bottles, Spare and service parts, Relocatable field surgical units

🏭 Tariff Industry Assistance Decisions

🏭 Trade, Customs & Industry
Tariff, Customs, Duty Rates, Goods, Import, Export