NEW ZEALAND GAZETTE

No. 110

Tariff Industry Assistance (Advertisement) Notice No. 1988/23—continued

82.02

*(ii) Hard edge tempered (i.e. toughened) back types, in any length, and of the following dimensions:
(a) in widths between 6.35mm and 31.75mm inclusive; and
(b) with pitches between 3 and 32 teeth per 25.40mm, excluding scalloped teeth
(5) Jigsaw blades

EXCLUDING:
Blades over 80mm in total length:
Lugged type blades;
Tungsten carbide coated and tipped blades
High speed, hollow ground side clearance types or ground tooth form types

REQUESTED APPROVAL

82.02
Blades for hand or machine saws (including toothless saw blades) excluding:
(1) Circular saw blades
(i) tungsten carbide tipped, 900mm and under
(ii) solid tooth from 305mm (12in) to 610mm (24in) diameter, designed for cutting timber
(2) Gang saw blades for wood sawing
(3) Bandsaw and toothed bandsaw strip for wood sawing
(4) High carbon steel bandsaw blade (excluding high speed steel solid and high speed steel welded edge, and tungsten carbide tipped and tungsten carbide coated and titanium carbide tipped) for cutting meat, bone, and metal in
(i) Hard edge flexible back; or
(ii) Hard edge tempered (i.e. toughened) back types, in any length, and of the following dimensions:
(a) in widths between 6.35mm and 31.75mm inclusive; and
(b) with pitches between 3 and 32 teeth per 25.40mm, excluding scalloped teeth
(5) Jigsaw blades

EXCLUDING:
Blades over 80mm in total length:
Lugged type blades;
Tungsten carbide coated and tipped blades
High speed, hollow ground side clearance types or ground tooth form types

(6) Hacksaw blades, 600mm length and under
(7) Blades for tubular frame firewood or pulpwood saws

Controller of Customs
PO Box 2218
WELLINGTON

Part II Ref. No.: 99
Appn. No.: HO 780918C
Category of Appln.: VA

+ 8202.32.00
Tungsten carbide tipped circular saw blade (and segments therefor), over 900mm diameter

Controller of Customs
PO Box 2218
WELLINGTON

Part II Ref. No.: 99
Appn. No.: HO 740387K
Category of Appln.: WA

8202.91.00
Hacksaw blades exceeding 600mm length

Controller of Customs
PO Box 2218
WELLINGTON

Part II Ref. No.: 99
Appn. No.: HO 560554H
Category of Appln.: NA

82.07

CURRENT APPROVAL
Interchangeable tools for hand tools, for machine tools or for power-operated hand tools (for example, for pressing, stamping, drilling, tapping, threading, boring, broaching, milling, cutting, turning, dressing, morticing or screw driving), including dies for wire drawing, extrusion dies for metal, and rock drilling bits;
OTHER KINDS;
EXCLUDING:
(1) Drills
(a) HSS and carbon/chrome/vanadium/tungsten steels, right hand helix,
(i) Straight shank Jobber length, double and single ended stub length and long series length 1mm to 13mm
(1/16in. to 1/2in.)
(ii) Straight shank long reach length 3mm to 13mm (1/8in. to 1/2in.)
(iii) Reduced shank of any diameter including Blacksmith type 33/64in. to 1/4in.
(iv) Reduced shank of any diameter (metal and woodworking) with standard or dowelling bit point 6mm to 13mm (1/4in. to 1/2in.)
(b) Tungsten carbide tipped twist from 2.381mm
(c) Drill sets, containing above type drills in diameter ranges:
Straight shank:
1mm to 13mm
1/16in. to 1/2in.
Reduced shank:
5mm to 20mm
3/16in. to 3/4in.
(d) Tungsten carbide tipped masonry, drills straight also reduced shank of any shank diameter "short" or "long" overall lengths within diameter range:
3mm to 32mm;
1/8in. to 1/4in.