Tariff Industry Assistance Decisions




NEW ZEALAND GAZETTE

No. 88

TARIFF INDUSTRY ASSISTANCE (DECISION) NOTICE NO. 1987/21

Decisions of the Minister of Customs in respect of Part I and Part II of the Customs Tariff

Notice is hereby given that the following decisions have been made in respect of the goods published in the Schedules to this notice.

SCHEDULE 2 – Decisions cancelled

The cancellations listed in this schedule take effect seven days from Gazette date unless otherwise specified, eg, WEF (date).

SCHEDULE 3 – Limited Decisions

(a) Approvals given under Schedule 3 are restricted to the applicant for whom the approval was originally given and are not available for general use.

This notice only serves to inform the importing/manufacturing community of the approvals existence.

(b) Schedule 3 and 4 will not be published in the Consolidated List of Decisions.

4 It should be noted that any concession or determination can be subject to amendment or cancellation by notification in the Gazette.

5 Where the month of the start date and end date is shown the day of the start date is the first day of that month and the day of the end date is the last day of that month - eg, 3/84 to 9/86 is 1/3/84 to 30/9/86.

SCHEDULE 1

General Decisions Approved

Tariff Item Description of Goods Rates of Duty Part II Ref. No. Effective From To
Normal Pref.
30.03.03(1) Medicaments
WN Actilyse (RT-PA) Free Free 25 630181K
WN Betadine Free Free 25 630184D
33.06.029 Dental mouthwash tablets Free Free 99 621546H
AK Novocol CA12 Free .. .. 603463C
39.02.21(1) Acryloyl/Parazold CS 1 Free Free .. 603482K
CH Childs safety gate plastic panels, washers and ferrules Free Free 99 640717L
AK Grafting bands Free Free 99 603484F
WN Square copper tube, 15mm square outer dimension 1.0mm, square inner dimension wall thickness Free Free 99 621657B
WN Petrol and diesel engine hydro/steam injection systems Free Free 99 621886F
AK Activated carbon water filters, domestic Free Free 99 603434K
84.19.030 Fully automatic flour packer, capacity per hour 25 tonne, bag drive range 10kg - 50kg Free Free 99 603413G
AK Air driven, plastic chip, paint stripping machine Free Free 99 603472B
WN Motorized hoists for studio and stage lighting equipment Free Free 99 621729L
AK Screw jacks and actuators Free Free 99 603446C
AK Teleoscopic boom material handlers Free Free 99 603471D
NB: Personal booms are excluded from this concession
AK Chocolate manufacturing machinery Free Free 99 603403K
B0 Machine-tools for working metal or metal carbides, not being machines falling within heading No. 84.49 or 84.50:

EXCLUDING:
(1) Bandsaws, with a physical cutting capacity in the horizontal positions, 450 or 900 as follows:
Cutting at 90°, round bar capacity up to 175mm diameter
Cutting at 90°, flat bar up to 280mm wide x 175mm high
Cutting at 45°, round bar capacity up to 130mm diameter
Cutting at 45°, flat bar up to 130mm wide x 175mm high
(2) Automatically controlled bandsaws
(3) Box and pan folders, hand operated
(4) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width
(5) Chain saw sharpeners
(6) Drill presses, bench or floor mounting column type, belt driven, excluding power feed types
(7) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel. (Multi-purpose or composite machines, incorporating this function fall within this Determination)
(8) Dualform hydraulic press with facility to cast its own tools models 5B, 6, 7, 8 and 9
(9) Machinery, peculiar for use in masking and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity:
swaging, 19mm - 76mm;
expanding, 25mm - 76mm;
bending, 16mm - 76mm; and
forming bends of 60mm - 140mm radii
EXCLUDING:
Numerically controlled machine tools
(10) Metal circular saws hand operated with blades not exceeding 101.6mm diameter excluding types specially suited for cutting precious metals
(11) Metalworking guillotines and shears, excluding:
(a) 702mm power operated guillotines especially suited for use in the photo-processing and engraving grade for cutting zinc, magnesium and copper sheets
(b) Reinforced steel bar cropping machines, with capacity exceeding 20mm
(c) Types with a straight cutting edge of 105mm or less
(12) Metal Hacksaws with a rated square material cutting capacity of which any one measurement is 250mm or less, excluding automatically controlled hacksaws
(13) Plate rolls and press brakes (including coil cradle straighteners)



Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1987, No 88


NZLII PDF NZ Gazette 1987, No 88





✨ LLM interpretation of page content

🏭 Applications for Tariff Industry Assistance (continued from previous page)

🏭 Trade, Customs & Industry
Tariff, Industry Assistance, Applications, Goods, Customs, Ports, Approval, Continuation, Variation, Withdrawal, Determination, Revocation