✨ Tariff Industry Assistance (Decision) Notice
1544
NEW ZEALAND GAZETTE
No. 49
Tariff Industry Assistance (Decision) Notice No. 1987/12—continued
| Tariff Item | Description of Goods | Rates of Duty Normal | Pref. | Part II Ref. | Ref. No. | Effective From | To |
|---|---|---|---|---|---|---|---|
| Cutting at 90o, flat bar up to 280mm wide x 175mm high | |||||||
| Cutting at 45o, round bar capacity up to 130mm diameter | |||||||
| Cutting at 45o, flat bar up to 130mm wide x 175mm high | |||||||
| EXCLUDING: | |||||||
| (2) Box and plan folders, hand operated | |||||||
| (3) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width | |||||||
| (4) Chain saw sharpeners | |||||||
| (5) Drill presses, bench or floor mounting column type, belt driven, excluding power feed types | |||||||
| (6) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel. (Multi-purpose or composite machines, incorporating this function fall within this Determination.) | |||||||
| (7) Dualform hydraulic press with facility to cast its own tools models 5E, 6, 7, 8 and 9 | |||||||
| (8) Machinery, peculiar for use in making and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity: swaging, 19mm – 76mm; expanding, 25mm – 76mm; and forming bends of 60mm – 140mm radii | |||||||
| EXCLUDING: numerically controlled machine tools | |||||||
| (9) Metal circular saws hand operated with blades not exceeding 1016mm diameter excluding types specially suited for cutting precious metals | |||||||
| (10) Metalworking guillotines and shears, excluding: | |||||||
| (a) 762mm power operated guillotines especially suited for use in the photo-processing and engraving grade for cutting zinc, magnesium and copper sheets | |||||||
| (b) Reinforced steel bar cropping machines, with capacity exceeding 20mm | |||||||
| (c) Types with a cut of 105mm or less | |||||||
| (11) Metal Hacksaws with a rated square material cutting capacity of which any one measurement is 250mm or less, excluding automatically controlled hacksaws | |||||||
| (12) Plate rolls and press brakes (including coil cradle straighteners) | |||||||
| (13) Presses, hydraulic | |||||||
| (14) Presses, mechanical, power operated and other, not exceeding 30.5 tonnes capacity | |||||||
| (15) Presses, mechanical, power operated and other, not exceeding 30.5 tonnes capacity | |||||||
| (16) Punch, crop and rivet presses, not exceeding 3.05 tonnes capacity | |||||||
| (17) Rod reinforcing steel cutters, not exceeding 20mm mild steel capacity | |||||||
| (18) Roll forming machines, including continuous spouting and continuous ridging machines | |||||||
| (19) Shearing, punching and notching machines, hand and hydraulically operated | |||||||
| (20) Sheet metal folding machines | |||||||
| (21) Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity | |||||||
| (22) Swaging and power crimping machines and parts thereof |
HO Ref No 65 The Countries Brunei and Singapore are afforded the Less Developing Country (LDC) rate of duty as set out under Part I of the Customs Tariff for the goods listed below.
- NOTE: Casper has been programmed to accept this concession without the need for a concession code number.
84.47.000 Machine-tools for working wood, cork, bone, Whole item ebonite (vulcanite), hard artificial plastic materials or other hard carving materials, other than machines falling within heading No. 84.49:
EXCLUDING:
Free 65 + 4/87
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1987, No 49
NZLII —
NZ Gazette 1987, No 49
✨ LLM interpretation of page content
🏭
Tariff Industry Assistance Decision Notice
(continued from previous page)
🏭 Trade, Customs & Industry7 April 1987
Tariff, Industry Assistance, Customs, Decisions, Approvals, Machine Tools, Metalworking Equipment, Duty Rates, Trade Exclusions