6042

NEW ZEALAND GAZETTE

No. 225

84.12.009 84.15 84.15.001 84.15.009
84.17 84.17.002 84.17.003 84.17.005
84.18.039 84.19.001 84.19.011 84.19.021
84.19.032 84.19.039 84.20.002 84.20.019
84.21.001 84.21.011 84.21.021 84.21.031
84.21.049 84.22.005 84.22.009 84.22.019
84.23.071 84.23.078 84.24 84.24.011
84.24.021 84.24.031 84.25 84.25.009
84.25.042 84.25.045 84.28.021 84.30
84.30.008 84.31.001 84.33.000 84.34.001
84.34.008 84.35.000 84.36.001 84.36.009
84.37.009 84.38.009 84.40.001 84.40.029
84.43.000 84.45.000 84.47.000 84.48.000
84.49.009 84.52.009 84.56.009 84.59.031
84.59.059 84.60.002 84.60.007 84.61.001
84.61.011 84.61.021 84.61.031 84.61.039
84.62.000 84.63.011 84.63.029 85.01.001
85.01.009 85.01.011 85.01.019 85.01.022
85.01.035 85.01.059 85.03.000 85.04.011
85.06.019 85.09.041 85.11.019 85.12.017
85.12.029 85.13.019 85.14.015 85.15.105
85.15.108 85.15.112 85.15.249 85.15.259
85.19.031 85.19.052 85.19.055 85.19.059
85.19.071 85.20.001 85.21.029 85.22.039
85.23.007 85.23.031 85.23.049 85.24.009
85.25.009 85.26.000 87.02.028 87.02.035
87.02.041 87.02.049 87.03.009 87.05.021
87.06.155 87.06.199 87.07.029 87.12.011
90.10.009 90.10.029 90.14.000 90.16.019
90.24.029 90.28.009 90.29.000 92.11.002
92.11.029 92.12.011 92.12.021 92.12.031
92.12.039 92.12.041 93.07.011 93.07.051
94.01.019 94.03.009 97.03.009 97.06.009
98.02.000

DETERMINATION OF THE MINISTER OF CUSTOMS UNDER SECTION 121 OF THE CUSTOMS ACT 1966

(1) The goods listed in Column Two of this Notice may be entered as unassembled motor vehicles (Tariff items 8701.20.01, 8703.21.01, 8703.22.01, 8703.23.01, 8703.24.01, 8703.31.01, 8703.32.01, 8703.33.01, 8703.90.01, 8704.21.01, 8704.21.09, 8704.22.01, 8704.23.01, 8704.31.01, 8704.31.09, 8704.32.01, 8704.90.01, 8704.90.09, 8706.00.01 and 8706.00.09) provided they are not further manufactured than specified in Column Three. None of the parts entered in these Tariff items shall be used otherwise than in the assembly, completion or manufacture, from the one shipment of parts, of one or more motor vehicles. Separate goods and conditions are determined in this Notice for each of the classes of vehicle identified in Column One.

(2) The Minister may allow goods to be entered at variance with this Determination and may make any such variation conditional.

(3) For the purpose of this Determination an 'omnibus' means a motor vehicle designed solely or principally for the carriage of ten or more seated persons (including the driver).

(4) This Determination shall come into force on the first day of January 1988 and may be amended from time-to-time by notice in the Gazette.

(5) The Determination in the following Gazette is hereby revoked on the first day of January 1988 but shall at all times after revocation continue to apply to goods entered during its currency:
Supplement No. 182 to the New Zealand Gazette of 15 October 1987
at pages 4797-4799.

Column One
Classes of Motor Vehicles

(A) CLASS I:
Motor vehicles (other than omnibuses),
being sedans, station wagons, utilities,
vans capable of carrying passengers and
goods or a combination of passengers
and goods, chassis/cabs, providing that
the gross vehicle weight of such
vehicles does not exceed 3,500 kg

Column Two
Goods

(i) Chassis, consisting of:
A metal underbody, side members,
end members, cross members, sub-frame,
tank supports, brackets for fixing
engine, springbrackets, engine, and
gearbox.

(ii) Bodies, the following parts:
Panels, and framework (if any)

Column Three
Condition in which such goods shall be
imported

These goods (except the engine and
gearbox) may be built up into a 'frame'
and the engine and gear box may be fully
assembled and attached to a frame. The
frame must not be further assembled but
such other minor fittings, for example,
stays, lugs, and brackets as are
ordinarily affixed to the frame may be so
affixed.

May be built up into the form of a
'shell', with doors attached thereto.
The shell may have a coat of grease, oil,
red oxide, or similar protective coating,
not including cellulose or pyroxylin or
similar lacquer. The shell shall not be
advanced in manufacture beyond the stage
where the necessary welding processes
have been performed; for example, the
seams shall not be soldered, filled or
smoothed.

The shell may not be attached to the
model underbody or frame or to parts
affixed thereto as referred to in (i)
above but may subject to the foregoing
restrictions, be imported in such
condition as the importer elects.