New Zealand Gazette – 1987 – No. 206

Page 5298

✨ Call for Tenders



5298

NEW ZEALAND GAZETTE

No. 206

PURSUANT to the Import Control Regulations 1973 (S.R. 1980/246), I, P.E. Donovan, Deputy Secretary of Trade and Industry, acting under delegated authority hereby call tenders for the goods specified below. Tenders close on the 14th December 1987 at 5 p.m. and must be received by the Registrar of Tenders by then to be valid.

Instructions for tenders and the general terms and conditions which apply to the submission and acceptance of tenders are set out in the Guide to Global Import Licence Tendering dated November 1986, as amended by notice in the New Zealand Gazette, No. 62, dated 30 April 1987. Bids may be submitted through the departmental bureaufax system. Tenders should be addressed to the Registrar of Tenders, P.O. Box 3146, Wellington or Bureaufax (04) 734 638 or be delivered by hand to the First Floor of the Bowen State Building, Wellington. Tenders for Round 57 must reach the Registrar no later than 5 p.m. on Monday, 14th December 1987.

PLASTICS INDUSTRY DEVELOPMENT PLAN: TAPES: FIRST PHASE-OUT ALLOCATION

Tenderers should note that this is the first of three annual licensing phase-out rounds.

Tender No. Item Code Goods: Brief Description No. of $2,000 cif Units
6169 39.235 Self-adhesive tapes, of a thickness not exceeding 0.5 mm and of a width not exceeding 20 cm (other than goods of Item Codes 39.120, 39.130, 39.220, 39.230, 39.240, 39.245 and 39.247 and exempt goods) 713
6170 39.240 Strapping tapes, of a thickness not exceeding 0.5 mm and of a width not exceeding 20 cm (other than goods of Item Codes 39.235, 39.245 and 39.247 and exempt goods) 33
6171 39.245 Polytetrafluoroethylene (PTFE) tapes of a thickness not exceeding 0.5 mm and of a width not exceeding 20 cm (other than exempt goods) 18
6172 39.247 Other tapes of a thickness not exceeding 0.5 mm and of a width not exceeding 20 cm (other than goods of Item Codes 39.235, 39.240, 39.245 and exempt goods) 42

PLASTICS INDUSTRY DEVELOPMENT PLAN: FINAL ALLOCATION

Tenders under the Plastic Industry Development Plan should note that this is the final round of the three annual phase out rounds for the bulk of goods produced by the plastics industry.

Tender No. Item Code Goods: Brief Description No. of $2,000 cif Units
6173 Ex 39.105 Cellular plastics, flexible, in the following forms—bulk, sheet flooring underlay excluding EVA sheeting for use in the manufacture of footwear 1320
6174 39.110) 39.115) Monofil, rods and sticks, pipes, tubes and profile shapes including those worked beyond the stage of being merely surface worked 5216
6175 39.112 Tubes and rods of man-made fibres agglomerated with plastic materials including those suited for the manufacture of fishing rods 256
6176 39.120) 59.145) Plates, sheets, strip, film and foil flexible other than cellular, including textile fabrics impregnated, coated, covered, or laminated with preparations of cellulose derivatives or of other artificial plastic materials of tariff Heading 59.08 1586
6177 39.125 Rigid films and foils of a thickness not exceeding 1 mm and exceeding 20 cm in width 4676
6178 39.130 Plates and sheets not elsewhere specified, articles of rectangular shape worked beyond the stage of being merely surface worked 9371
6179 39.220 Seamless tubes, rigid 22 491
6180 39.205 Seamless tubes, flexible; other than layflat, over 25 mm outside diameter 2078
6181 39210 Seamless tubes, flexible; other than layflat, 25 mm outside diameter and under 493
6182 39.215 Couplings, unions, tees, elbows, bends, and similar fittings for pipes, tubes, and hose 7420
6183 39.220 Seamless tubes; flexible; layflat; flexible films (other than self adhesive) of a thickness not exceeding 0.25 mm and exceeding 20 cm in width 25 600
6184 39.225 Bags, pouches and similar flexible containers 17252
6185 39.230 Flexible film of a thickness not exceeding 0.25 mm and exceeding 20 cm in width, self adhesive, excluding coated jumbo rolls for use in the manufacture of tapes 467
6186 39.250 Corrugated roofing 2383
6187 39.260 Bottles, boxes, drums, jars, tubs, and other containers of a kind commonly used for the conveyance or packaging of goods, viz: collapsible tubs and nestable containers 6308
6188 39.265 Bottles, boxes, drums, jars, trays, tubs, and other containers of a kind commonly used for the conveyance or packaging of goods, viz: non-nestable containers not exceeding 250 ml capacity 2416
6189 39.270 Bottles, boxes, drums, jars, trays, tubs, and other containers of a kind commonly used for the conveyance or packaging of goods, viz: non-nestable containers exceeding 250 ml capacity 10 844
6190 39.275 Stoppers, Lids, caps, and similar closures 2841
6191 39.280 Baths (including shower baths) and panels and fittings thereof, shower bases, wash basins, lavatory pans, bidets (including seats and covers thereof) and similar sanitary wares 2289
6192 39.285 Stationery Goods of Plastic 2461
6193 39.290 Tableware, kitchen and household utensils of plastic 9392
6194 39.300 Standard, table and wall lamps, lampshades and other light fittings, of plastic 1233
6195 39.325 All other plastic articles 12 174

LEATHERS AND COMPONENTRY: THIRD ALLOCATION

This is the third round held under the FIDP. Tenderers should note that lower tariff rates will become effective from 1 January 1988.

Tender No. Item Code Tariff Items Goods: Brief Description No. of $2,000 cif Units
6196 64.015 64.05.000 Parts of footwear (including uppers, insoles and screw-on-heels) of any material except metal 451
6197 G. 961 Ex 39.02.291.69E Cellular EVA sheet soling material for use in the manufacture of footwear 42


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa — PDF NZ Gazette 1987, No 206


NZLII — PDF NZ Gazette 1987, No 206




✨ LLM interpretation of page content

🏭 Call for Tenders: Round 57

🏭 Trade, Customs & Industry
Tenders, Industry Development Plans, Plastics, Leather
  • P.E. Donovan, Deputy Secretary of Trade and Industry