Tariff Industry Assistance Decisions




15 SEPTEMBER

NEW ZEALAND GAZETTE

TARIFF INDUSTRY ASSISTANCE (DECISION) NOTICE NO. 1987/34

Decisions of the Minister of Customs in respect of Part I and Part II of the Customs Tariff

  1. Notice is hereby given that the following decisions have been made in respect of the goods published in the Schedules to this notice.

  2. SCHEDULE 2 - Decisions cancelled. The cancellations listed in this schedule take effect seven days from Gazette date unless otherwise specified, eg, WEF (date).

  3. (a) SCHEDULE 3 - Limited Decisions

    Approvals given under Schedule 3 are restricted to the applicant for whom the approval was originally given and are not available for general use.

    This Notice only serves to inform the importing/manufacturing community of the approvals existence.

    (b) Schedule 3 and 4 will not be published in the Consolidated List of Decisions.

  4. It should be noted that any concession or determination can be subject to amendment or cancellation by notification in the Gazette.

  5. Where the month of the start date and end date is shown the day of the start date is the first day of that month and the day of the end date is the last day of that month – eg, 3/84 to 9/86 is 1/3/84 to 30/9/86.


SCHEDULE 1

General Decisions Approved

Tariff Item Description of Goods Rates of Duty Part Ref. No. Effective From To
Normal Pref. Ii
AK 21.07.017 Crab flavour in concentrated liquid form Free Free 99
HO 29.06.009 Beta naphthol flake 99% Free Free 99
WN 30.02.009 Monoclonal anti sera Free Free 99
AK 32.09.005 Epoxy internal aluminium can protective spray lining material, water borne Free Free 99
34.02.000 Products, as may be approved, when imported in bulk and not being soaps or containing soap; Free Free 99
APPROVED:
AK Hefti emulsifiers, ML-55-F4, MP-33F, MO-50F, MS-33F, DO-33-F Free Free 99
CH Thermoplastic purging emulsion Free Free 99
AK 38.11.049 Dual 9605C Free Free 99
AK 38.19.089 Chemical products and preparations etc. Free Free 99
AK Alox 606, 606-70 .. Free Free 99
WN Embalming fluids and/or powders Free Free 99 720135E
AK Raybo 82 – hydrolfo .. Free Free 99
AK Tinogel VP, VZ, EZ100, EZ200, TE, EPA, WM, PLS Free Free 99 700304J
WN Polyvinyl chloride adhesive chart channels Free Free .. 6218662
AK 39.07.301 Electric fusion fittings exceeding 25mm outside diameter and capable of operation at temperatures exceeding 80 degrees C and pressures exceeding 5 bar Free Free 99
WN 39.07.829 Cassette, compact disc and/or video cassette drawers Free Free 99
AK 40.08.032 Fire resistant window channelling Free Free 99
AK 59.08.012 P.T.F.E. laminate medical membrane of 0.2 micron pore size on nonwoven polypropylene scrim backing Free Free 99
AK 59.13.000 Woven footwear elastic exceeding 100mm in width Free Free 99
WN 60.02.000 Soccer gloves Free Free 99
WN 60.08.001 Rubber backed hosiery stretch lace of widths between 7cm to 10cm inclusive Free Free 99
WN 61.10.001 Soccer gloves Free Free 99
AK 67.02.004 Table linen of tuscany or tatting lace Free Free 99
AK 73.18.009 Chrome molybdenum tubing Free Free 99
AK 73.18.009 Solution annealed welded stainless steel tube 43mm O.D. 5 Aust Free 99
AR 73.38.009 1.6mm wall thickness Free Free 99
HO 82.02.028 Single buffer, gas cannister powered, trampers stoves Free Free 99
WN 84.10.049 Jarvis beef splitting band saw blade Free Free 99
WN Single-stage regenerative turbine boiler feed pumps – sizes having a net generated head exceeding 87 metres Free Free 99
WN 84.45.000 Machine-tools for working metal or metal carbides, not being machines falling within heading No. 84.49 or 84.50: Free Free 99
EXCLUDING:
(1) Bandsaws, with a physical cutting capacity in the horizontal positions, 450 or 900 as follows:
Cutting at 90o, round bar capacity up to 175mm diameter
Cutting at 90o, flat bar up to 280mm wide x 175mm high
Cutting at 45o, round bar capacity up to 130mm diameter
Cutting at 45o, flat bar up to 130mm wide x 175mm high
EXCLUDING:
Automatically controlled bandsaws
(2) Box and plan folders, hand operated
(3) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width
(4) Chain saw sharpeners
(5) Drill presses, bench or floor mounting column type, belt driven, excluding power feed types
(6) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel. (Multi-purpose or composite machines, incorporating this function fall within this determination.)
(7) Dualforma hydraulic press with facility to cast its own tools models 5E, 5, 7, 9 and 2
(8) Machinery, peculiar for use in making and repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity:
swaging, 10mm – 76mm;
expanding, 25mm – 76mm;
bending, 10mm – 76mm; and
forming bends of 60mm – 140mm radii
EXCLUDING:


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1987, No 157


NZLII PDF NZ Gazette 1987, No 157





✨ LLM interpretation of page content

🏭 Tariff Industry Assistance (Decision) Notice No. 1987/34 (continued from previous page)

🏭 Trade, Customs & Industry
15 September 1987
Tariff, Industry Assistance, Customs, Goods, Approvals, Decisions, Schedules