β¨ Gas Industry Regulations
3886
THE NEW ZEALAND GAZETTE
No. 135
Approvals of CNG Dispensing Facilities
PURSUANT to sections 60 and 61 of the Gas Act 1982 and to regulations 36 and 37 of the Gas Industry Regulations 1984, I, David James Green, Chief Inspecting Engineer, hereby give notice that only CNG dispensing facilities complying with the following requirements are approved for use to fill CNG vehicle cylinders:
SUPPLY OF CNG FOR SALE
- All dispensing facilities used to supply CNG for sale shall:
(a) if installed from and including 1 January 1985:
(i) be of a type approved by the Chief Inspecting Engineer. Schedule I lists the types so approved, and Schedule II lists the conditions under which those types are approved;
(ii) from and including 1 November 1988, comply with the requirements of NZS 5425 Part 1, Amendment 1 1986.
(b) if installed before 1 January 1985:
(i) meet Field Type Approval requirements as specified in writing to each facility owner and within the time required by the Chief Inspecting Engineer;
(ii) from and including 1 January 1988, meter all CNG supplied for sale using an online metering system approved by the Chief Inspecting Engineer;
(iii) from and including 1 November 1988, comply with the requirements of NZS 5425 Part 1, Amendment 1 1986.
NOTE: Any individual dispenser approved by the Chief Inspecting Engineer under clause 1 (b) (i) shall be deemed to be a Type Approved dispenser from that time onward unless the Approval is specifically revoked by the Chief Inspecting Engineer.
SUPPLY OF CNG OTHER THAN FOR SALE
- All dispensing facilities used to supply CNG other than for sale shall:
(a) Comply with all relevant requirements of NZS 5425 Part 1 1980.
(b) from and including 1 November 1988, comply with the requirements of NZS 5425 Part 1, Amendment 1 1986.
MAXIMUM CNG FILL PRESSURE
- In situations in which vehicle filling is completed within 30 minutes, the maximum fill transfer pressure shall be 20 MPa (gauge).
- In situations in which vehicle filling is not completed within 30 minutes, the maximum fill transfer pressure shall be 16.5 MPa (gauge) unless otherwise authorised by notice in writing from the Chief Inspecting Engineer.
The following approvals published in the New Zealand Gazette are hereby revoked:
Approval published 18 July 1985, No. 132, page 3065.
Approval published 19 December 1985, No. 234, page 5735.
Approval published 5 June 1986, No. 86, page 2405.
Transfer of Approval, published 2 October 1986, No. 155, page 4152.
SCHEDULE I
| Type Approval No. | Manufacturer | Model No. | Description |
|---|---|---|---|
| 0001 | Sulzer NZ Ltd. | AFS 1003 | Three Line Single CNG Dispenser |
| 0002 | Sulzer NZ Ltd. | AFS 2003 | Three Line Dual CNG Dispenser |
| 0003 | Sulzer NZ Ltd. | AFS 2001 | Dual Top Off CNG Dispenser |
| 0004 | Pressure Control Engineering Ltd. | PCE SAM/RE3 or SAM/RZ/FE3 | Three Line Single CNG Dispenser |
| 0005 | Sulzer NZ Ltd. | AFS 2004 | Four Line Dual CNG Dispenser |
| 0006 | Sulzer NZ Ltd. | AFS 1001 | Single Top Off CNG Dispenser |
| 0007 | Pressure Control Engineering Ltd. | PCE DAM/RE3 or DAM/RZ/FE3 | Three Line Dual CNG Dispenser |
| 0008 | Compac Industries Ltd. | 4BEDS | Four Line Single CNG Dispenser |
| 0009 | Compac Industries Ltd. | 1BEDS | One Line Single CNG Dispenser |
| 0010 | Compac Industries Ltd. | 4BEDD | Four Line Dual CNG Dispenser |
| 0011 | Compac Industries Ltd. | 3BEDD | Three Line Dual CNG Dispenser |
| 0012 | Compac Industries Ltd. | 3BEDS | Three Line Single CNG Dispenser |
| 0013 | Pressure Control Engineering Ltd. | PCE DAM/RE4 or DAM/RZ/FE4 | Four Line Dual CNG Dispenser |
| 0014 | Compac Industries Ltd. | 1BEDD | One Line Dual CNG Dispenser |
| 0015 | Solid State Equipment Ltd. | COANDA-V1-2 | Two Line Single CNG Dispenser |
| 0016 | Compac Industries Ltd. | 2BEDD | Two Line Dual CNG Dispenser |
| 0017 | Compac Industries Ltd. | 2BEDS | Two Line Single CNG Dispenser |
| 0018 | Sulzer NZ Ltd. | AFS 1002 | Two Line Single CNG Dispenser |
| 0019 | Solid State Equipment Ltd. | COANDA-V1-2 | Two Line Single CNG Dispenser |
| 0020 | CompAir (NZ) Ltd. | 1LSD | One Line Single CNG Dispenser |
| 0021 | CompAir (NZ) Ltd. | 3LSD | Three Line Single CNG Dispenser |
| 0022 | CompAir (NZ) Ltd. | 2LDD | Two Line Dual CNG Dispenser |
| 0023 | CompAir (NZ) Ltd. | 2LSD | Two Line Single CNG Dispenser |
| 0024 | CompAir (NZ) Ltd. | 1LDD | One Line Dual CNG Dispenser |
| 0025 | Pressure Control Engineering Ltd. | PCE/SAM/RZ/FE1 | One Line Single CNG Dispenser |
| 0026 | Pressure Control Engineering Ltd. | PCE/SAM/RZ/FE2 | Two Line Single CNG Dispenser |
| 0027 | Pressure Control Engineering Ltd. | PCE/DAM/RZ/FE1 | One Line Dual CNG Dispenser |
| 0028 | Pressure Control Engineering Ltd. | PCE/DAM/RZ/FE2 | Two Line Dual CNG Dispenser |
| 0029 | Compac Industries Ltd. | 4BEDD Series 2000 | Four Line Dual CNG Dispenser |
| 0030 | Compac Industries Ltd. | 3BEDD Series 2000 | Three Line Dual CNG Dispenser |
| 0031 | Compac Industries Ltd. | 3BEDS Series 2000 | Three Line Single CNG Dispenser |
| 0032 | Compac Industries Ltd. | 2BEDD Series 2000 | Two Line Dual CNG Dispenser |
| 0033 | Compac Industries Ltd. | 2BEDS Series 2000 | Two Line Single CNG Dispenser |
| 0034 | Compac Industries Ltd. | 1BEDD Series 2000 | One Line Dual CNG Dispenser |
| 0035 | Compac Industries Ltd. | 1BEDS Series 2000 | One Line Single CNG Dispenser |
| 0036 | Compac Industries Ltd. | 1BEDD Series 20 | One Line Dual CNG Dispenser |
| 0037 | Compac Industries Ltd. | 1BEDS Series 20 | One Line Single CNG Dispenser |
| 0038 | Compac Industries Ltd. | 1BEDS Series 20 | One Line Single CNG Dispenser |
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1987, No 135
NZLII —
NZ Gazette 1987, No 135
β¨ LLM interpretation of page content
πΎ Approvals of CNG Dispensing Facilities
πΎ Primary Industries & ResourcesCNG, Gas Act, Dispensing Facilities, Regulations, Approvals
- David James Green, Chief Inspecting Engineer