3062
THE NEW ZEALAND GAZETTE
No. 111

Tariff Industry Assistance (Decision) Notice No. 1986/27—continued

Whole Item Saws (non-mechanical) and blades for hand or machine saws (including toothless saw blades):
Other blades:
EXCLUDING:
(1) tungsten carbide tipped
(2) solid tooth from 305mm (12in) to 610mm (24in) diameter, designed for cutting timber
Gang saw blades for wood sawing
High carbon steel bandsaw blade (excluding high speed steel solid and high speed steel welded edge, and tungsten carbide tipped and tungsten carbide coated) for cutting meat, bone, metal and wood in
(1) Hard edge flexible back; or
(1i) Hard edge tempered (i.e. toughened) back types, in any length, and of the following dimensions:
(a) in widths between 6.35mm and 31.75mm inclusive; and
(b) with pitches between 3 and 32 teeth per 25.40mm, excluding scalloped teeth
Jigsaw blades
EXCLUDING:
Blades over 80mm in total length:
Lugged typed blades;
Tungsten carbide coated and tipped blades
High speed, hollow ground side clearance types or ground tooth form types | Free | Free | 99 | 561334F | 7/86 .. |
| DN 82.05.018 | Countersinks — single flute, 1/2 shank 15.5 — 19.5mm, on condition that they are used solely by a manufacturer in the metal working industry | Free | Free | 99 | 679715G | 7/86 .. |
| DN 82.05.018 | Drills — tungsten carbide tipped metal working, twist from 2.381, on condition that they are used solely by a manufacturer in the metal working industry | Free | Free | 99 | 679717C | 7/86 .. |
| DN 82.05.018 | Facing cutters, tungsten carbide tipped, circular; other than throwaway tip types, on condition that they are used by a manufacturer in the metal working industry
Whole Item Interchangeable tools for hand tools, for machine tools or for power-operated hand tools (for example, for pressing, stamping, drilling, tapping, threading, boring, broaching, milling, cutting, turning, dressing, morticing or screw driving), including dies for wire drawing, extrusion dies for metal, and rock drilling bits:
OTHER KINDS:
EXCLUDING:
(1) Drills
(a) HSS and carbon/chrome/vanadium/tungsten steels, right hand helix;-
(i) Straight shank Jobber length, double and single ended stub length and long series length 1mm to 13mm (3/4in. to 1/2in.)
(ii) Straight shank long reach length 3mm to 13mm (1/8in. to 1/2in.)
(iii) Reduce shank of any diameter including Blacksmith type 13mm to 32mm (33/64in. to 1 1/4in.)
(iv) Reduced shank of any diameter (metal and wood-working) with standard or dowelling bit point 6mm to 13mm (1/4in. to 1/2in.)
(v) Straight shank (4 flute core type) 3mm to 13mm (1/8in. to 1/2in.)
(b) Tungsten carbide tipped twist from 2.381mm
(c) Drill sets, containing above type drills in diameter ranges;
Straight shank:
1mm to 13mm
1/16in. to 1/2in.
Reduced shank;
6mm to 20mm
1/4in. to 3/4in.
(d) Tungsten carbide tipped masonry, drills straight also reduced shank of any shank diameter ‘‘short’’ or ‘‘long’’ overall lengths within diameter range:
3mm to 32mm;
1/8in. to 1 1/4in.
(e) Countersinks, single flute;
1/2in. shank 15.5mm to 19.5mm
(f) Reamers, Parallel Machine, Tungsten Carbide tipped, non-adjustable:
straight shank, all sizes under 14.29mm morse taper shank, all sizes over 14.29mm
(g) Router bits, with cutting or working faces of | Free | Free | 99 | 561335D | 7/86 .. |