Tariff and Trade Notices




2652
THE NEW ZEALAND GAZETTE
No. 94

Tariff Notice No. 1982/164—Applications for Exclusion from Determination

NOTICE is hereby given that applications have been made for exclusion of goods as follows from current determinations of the Minister of Customs and for admission of such goods at the rates of duty prescribed under the substantive Tariff item therefor:

Port Appn. No. Tariff Item Goods Rates of Duty Part II Ref.
Normal Pref.
H.O. 16841 59.16.001 Resistol Belting, 3 mm, and over, in thickness
Note: If approved, the above goods will be subject to the rates of duty prescribed under Tariff item 56.16.009, or at the rates of duty prescribed under Part II of the Tariff, Reference 99 45* Aul 25*

Can 25
DC 25

Pac Free | 99 |
| H.O. | 707 | 73.25.001 | ⅜ in. Stranded steel conveyor rope with polyester core, heat resistant, for use with conveyor belt in 360°F oven
Note: If approved, the above goods will be subject to the rates of duty prescribed under Tariff item 73.25.009, or at the rates of duty prescribed under Part II of the Tariff, Reference 10 | 35 | Aul 20
Can 25
DC 25

Pac Free | 10 |
| H.O. | 17116 | 73.25.001 | Stainless steel wire rope, 19 mm
Note: If approved, the above goods will be subject to the rates of duty applicable to Tariff item 82.05.019, or at the rates of duty prescribed under Part II of the Tariff, Reference 99 | 35 | Aul 20
DC 25
Pac Free | 10 |
| H.O. | 16859 | 82.05.011 | Dijet milling cutters
Note: If approved, the above goods will be subject to the rates of duty prescribed under Tariff item 82.05.019, or at the rates of duty prescribed under Part II of the Tariff, Reference 99 | 35
| Aul Free
Can 25

DC 25
Pac Free | .. |
| H.O. | 16860 | 82.05.011 | Dijet tungsten carbide tipped twist drills
Note: If approved, the above goods will be subject to rates of duty prescribed under Tariff item 82.05.019, or at the rates of duty prescribed under Part II of the Tariff, Reference 99 | 35
| Aul Free
Can 25
DC 25

Pac Free | .. |
| H.O. | 16771 | 82.05.011 | Leitz—599 serrated profile cutterhead
Note: If approved, the above goods will be subject to the rates of duty prescribed under Tariff item 82.05.019, or at the rates of duty prescribed under Part II of the Tariff, Reference 99 | 35 | Aul Free
Can 25

DC 25* | .. |

*or such lower rate of duty as the Minister may in any case direct

The identification reference to the application number indicates the office to which any objections should be made.

H.O.—Comptroller of Customs, Private Bag, Wellington.

Any person wishing to lodge an objection to the granting of these applications should do so in writing to the appropriate office as indicated by the identification reference on or before 2 September 1982. Submissions should include a reference to the identification reference, application number, Tariff item, and description of goods concerned and be supported by information as to:

(a) The range of equivalent goods manufactured locally;
(b) The proportion of New Zealand and imported material used in manufacture;
(c) Present and potential output; and
(d) Details of factory cost in terms of materials, labour, overhead, etc.

Dated at Wellington this 12th day of August 1982.

P. J. McKONE, Comptroller of Customs.

New Zealand Australia Free Trade Agreement—Application for the Approval of Goods as Determined Imported Materials—Notice 1982/4

NOTICE is hereby given that application has been made to Australia for the approval of the goods, described in the Schedule hereto, as determined imported materials in accordance with Australian legislation relating to the rules governing the origin of goods “wholly manufactured”.

Any person wishing to lodge an objection to New Zealand supporting these applications should do so in writing on or before 9 September 1982.

Submissions should include a reference to the application number, Tariff item and description of the goods concerned, be addressed to the Comptroller of Customs, Private Bag, Wellington, for the attention of the Director, Trade Division, and be supported by information as to the quality, range, supply, etc., of the goods or suitable alternative goods produced in New Zealand.

SCHEDULE

MATERIALS and components for the manufacture of disposable gas lighters, viz:

Application No. Tariff Item Goods
4.1 39.01.201 Acetal homopolymer resin (Dupont “Delrin” resin).
4.2 73.14.000 Straight alloy spring wire of 0.26 mm, 0.32 mm and 0.48 mm diameter.
4.3 36.08.009 Flint—Special purpose ignition source, tailor-made to suit sparkwheel in order to provide appropriate function for whole of the life of the gas supply.
4.4 98.10.019 Sparkwheel, precision cut and heat treated sintered carbide wheel with each end encased in die-cast knurled cheeks.
4.5 84.62.000 Ball, 1 mm precision ground and lapped stainless steel. Ball used for sealing off filling hole after gas insertion.
4.6 84.61.021 Valve—6 part special purpose precision gas flow regulator employing: nomex filter, die-cast filter support, neoprene, “O” ring seal, die-cast nut, brass body die-cast adjustment wheel all manufactured and assembled to close tolerances.
4.7 84.61.021 Stem—Two-part special purpose precision gas release assembly employing: turned brass body and elastomer sealing plug.

Dated at Wellington this 12th day of August 1982.

P. J. McKONE, Comptroller of Customs.



Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1982, No 94


NZLII PDF NZ Gazette 1982, No 94





✨ LLM interpretation of page content

🏭 Applications for Exclusion from Tariff Determinations

🏭 Trade, Customs & Industry
12 August 1982
Tariff, Customs Duty, Exclusion Applications, Imported Goods, Wellington
  • P. J. McKONE, Comptroller of Customs

🏭 New Zealand Australia Free Trade Agreement - Application for Approval of Imported Materials

🏭 Trade, Customs & Industry
12 August 1982
Free Trade Agreement, Imported Materials, Disposable Gas Lighters, Wellington
  • P. J. McKONE, Comptroller of Customs