3514 THE NEW ZEALAND GAZETTE No. 123

LPG Fuel System Approvals

PURSUANT to regulation 90b of the Traffic Regulations 1976* (as inserted by the Traffic Regulations 1976 Amendment No. 7) and pursuant to the powers delegated to me by the Secretary for Transport, I, Trevor Alan Lister, Senior Automotive Engineer, hereby approve the components listed in the Schedule hereto for inclusion in any LPG automotive fuel system installed and operated in accordance with the requirements of New Zealand Standard NZS 5422, Part 1, 1980 (and any standard made in amendment thereto or in substitution therefor) subject to the conditions set out in the said Schedule.

SCHEDULE
LPG FUEL CYLINDERS

LPG fuel cylinders are approved subject to the following conditions—

1. That they be permanently and clearly marked, either on a thickened portion of the cylinder or on a suitably attached metal plate, with characters not less than 6 mm high if space permits but in any case not less than 3 mm high, displaying the following information:
   (a) The specification to which the cylinder was manufactured.
   (b) The manufacturer’s name or mark, and the serial number of the cylinder.
   (c) The date of the original cylinder inspection and the identification mark of the inspection authority who made the inspection.
   (d) The date of any periodic cylinder test and the identification mark of the cylinder testing station who made each test.
   (e) The cylinder test pressure.
   (f) The nominal water capacity of the cylinder.
   (g) The tare weight of the cylinder.
   (h) An identification that the cylinder is suitable for use with LPG.
2. That they be provided with valves and fittings which provide the following functions—
   (a) Filling connection incorporating a non-return valve.
   (b) Service valve incorporating an excess flow valve.
   (c) Contents gauge.
   (d) Safety valve.
   (e) A fixed liquid level indicator or an automatic fill shut off device which prevents the cylinder being filled beyond 85% of the total cylinder capacity.
   Valves and fittings shall have a service pressure rating of at least that of the cylinder to which they are fitted and shall be dimensioned, threaded and marked in accordance with the requirements of Section 2.3 of New Zealand Standard NZS 5422 “The Use of LPG and CNG Fuels in Internal Combustion Engines—Part 1, LPG Fuel”.
3. That the cylinders be tested at periods not exceeding 5 years in accordance with the periodic test requirements laid down in the specification to which the cylinder was manufactured.
   Dated at Wellington this 14th day of October 1982.

T. A. LISTER, Senior Automotive Engineer.

*S.R. 1976/227
Amendment No. 1: S.R. 1978/72
Amendment No. 2: S.R. 1978/301
Amendment No. 3: S.R. 1979/128
Amendment No. 4: S.R. 1980/31
Amendment No. 5: S.R. 1980/115
Amendment No. 6: S.R. 1981/158
Amendment No. 7: S.R. 1981/311
Amendment No. 8: S.R. 1982/93
(M.O.T. 14/1/17)

BANKRUPTCY NOTICES

In Bankruptcy—Notice of Adjudication and of First Meeting
IN the matter of NELSON HEYWOOD, a bankrupt. Notice is hereby given that Nelson Heywood, of 319 Western Hills Drive, Whangarei, was on 8 October 1982 adjudged bankrupt and I hereby summon a meeting of creditors to be held at Whangarei, on the 9th day of November 1982, at 10.30 o’clock in the forenoon.

All proofs of debt must be filed with me as soon as possible after the date of adjudication and if possible before the first meeting of creditors.

Dated this 14th day of October 1982.

P. R. BRUCE, Official Assignee.

Private Bag, Whangarei.

In Bankruptcy
Notice is hereby given that the following dividends are now payable on all accepted proved claims in the estates listed below:

Arbon, Robert, of 18a Irene Crescent, Hamilton, a first dividend of 57.2c in the dollar.

Clarke, James Hikairo, of 5 Kotuku Street, Hamilton, a first dividend of 63.6c in the dollar.

A. DIBLEY, Official Assignee.

Second Floor, 16–20 Clarence Street, Hamilton.