New Zealand Gazette – 1980 – No. 31

Page 965

✨ Import Control Exemption Notice

2 April THE NEW ZEALAND GAZETTE 965

FIRST SCHEDULE—continued
EXEMPTIONS CREATED—continued

Classes of Goods

Tariff Items
Ex 83.02.009.51c Hinges of base metal peculiar to use in making suitcases and other travel goods.
Ex 83.02.009.69F Base metal fittings when declared—
(a) by a manufacturer for use by him only in the manufacture and repair of saddlery;
(b) by an importer that they will be sold only to manufacturers for use in the manufacture and repair of saddlery.
83.05.001 Staples.
83.05.009.01H Drawing board clips, spring steel, of a kind designed for holding materials to drawing boards.
Ex 83.07.021.19H Lamps, shadowless, specially designed for use in hospital theatres and dentists’ surgeries.
83.09.001 to Frames with clasps of base metal for handbags and the like.
83.09.009
83.09.059 Other, including beads and spangles, of base metal.
83.11.001 Bells and gongs, non-electric, of base metal, and parts thereof of base metal for cycles.
84.03.000 Producer gas and water gas generators, with or without purifiers; acetylene gas generators (water process) and similar
gas generators, with or without purifiers.
84.06.041.01K Vehicle engines for propelling cycles and tractors.
84.06.041.11G Compression ignition engines for propelling vehicles of Tariff Chapter 87.
Ex 84.06.041.29K Other kinds of vehicle engines.
Ex 84.06.061.11H Pistons, cylinder sleeves, piston rings, valves and valve seat inserts, mufflers and other parts suited for use in cycle and
Ex 84.06.061.19C tractor engines on declaration under the Customs Act that they will be so used.
84.06.071.21L
84.06.071.31H
Ex 84.06.061.19C Pins, piston, not being plain unworked metal rods or tubes; piston castings in the rough, as may be approved by the
Minister of Customs under Part II of the Customs Tariff.
84.07.000.01F Vehicle engine carburettors.
84.07.000.01E Hydraulic engines and motors (excluding gear type motors).
Ex 84.07.000.09t
84.07.000.19H
84.08.005 Wind engines (windmills).
84.08.009 Other engines and motors (other than marine jet propulsion units, whether or not mounted on motors).
84.10.021 Pumps, fuel, lubricating oil and water, specially suited for use with vehicle engines.
Ex 84.11.031 Air compressor outfits of a capacity exceeding 128 litres/second (270 cfm) free air delivered (F.A.D.) at 690 kPa
(100 p.s.i.) at inlet condition of 101 kPa (14.7 p.s.i.) and 21.1°C temperature (F.A.D. defined by B.S. 1571, 1949),
and parts thereof.
Ex 84.11.051.01E Other air compressors of a capacity less than 0.94 litres/second (2 cfm) or exceeding 24 litres/second (50cfm) dis-
Ex 84.11.051.09L placement at pressures up to 1.379 MPa (200 p.s.i.), and parts thereof.
84.11.061 Free-piston generators for gas turbines and parts thereof.
84.14.009 Fans and blowers, as may be approved by the Minister.
Ex 84.15.000.29F Evaporators and condensers for household refrigerators.
84.16.000 Calendering and similar rolling machines (other than metal-working and metal-rolling machines and glass-working
machines) and cylinders therefor.
84.19.001 Washing machines for bottles and other containers.
84.19.011 Butter packing or wrapping machines.
84.20.009 Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting and
checking machines; weighing machine weights of all kinds; other than as may be determined by the Minister.
84.21.011 Spray guns and similar appliances.
84.21.021 Steam or sand blasting machines and similar jet projecting machines.
84.22.009.01L Spur gear type chain hoists; chain pulley tackle, manually operated,
to
84.22.009.09F
Ex 84.22.009.39H Bases, self-propelled, crawler tractor type, of machines classified within Tariff Heading 84.22 specifically approved
Ex 84.22.009.89D by the Minister of Customs for admission under Part II of the Customs Tariff.
84.22.009.46L Escalators specially designed for permanent installation in buildings.
84.22.009.49G
84.22.009.79G
Ex 84.22.009.88F Loaders, shovel type, specially designed for use in underground mines.
84.23.021 Stands, drill, being catalogued accessories of portable electric power tools.
84.23.051 Other kinds of excavating machinery, other than as may be determined by the Minister.
84.23.061 Rock boring machinery and coal or rock cutters.
84.23.079.01B Bases, self-propelled, crawler tractor type, of machines classified within Tariff Heading 84.23 (excluding bulldozer
blades, buckets and the like and their actuating equipment) being those specifically approved by the Minister of
Customs as admissible under Part II of the Tariff.
84.23.079.21G Road graders, exceeding 14 514 kg in weight.
84.23.079.22E
84.23.079.51J Snow ploughs, other than self-propelled.
84.24.001.11D Agricultural and horticultural machinery for soil preparation or cultivation; lawn and sports ground rollers viz:
84.24.051.05G designed for use solely with garden tractors.
84.24.051.21J
84.24.051.41C
84.24.051.61H
84.24.051.81B
84.24.061.01K
84.24.011 Parts of ploughs, viz: mould-board plates, unbent; steel shareplates cut to pattern; skeith plates; plough beam
forgings; discs for ploughs.
84.24.031.09F Agricultural and horticultural machinery for soil preparation or cultivation; lawn and sports ground rollers viz:
84.24.041.19A parts.
84.24.051.19G
84.24.051.39A
84.24.051.59F
84.24.051.71E
84.24.051.79C

PDF embedding disabled (Crown copyright)

View this page online at:

VUW Te Waharoa — NZ Gazette 1980, No 31

NZLII — NZ Gazette 1980, No 31

Parliament House (depicted) was completed in 1918 and remains the primary seat of Parliament.

✨ LLM interpretation of page content

🏭 Import Control Exemption Notice (No. 1) 1980 (continued from previous page)

Domain🏭 Trade, Customs & Industry
KeywordsImport control, Exemption, Customs Tariff, Trade regulations, Refractory goods, Ceramic products, Glass fabrics, Precious metals, Iron and steel products, Scaffolding fittings, Welded link chain, Nails, Tacks, Staples, Hook-nails, Corrugated nails, Spiked cramps, Studs, Spikes, Drawing pins, Screw studs, Needles, Sanitary ware, Vitreous enamelled holloware, Crucibles, Chaplets, Solder pots, Mouse traps, Rat traps, Animal traps, Vermin traps, Bobbins, Spools, Reels, Cones, Cops, Capacity measures, Wire rod, Copper wire, Gauze, Cloth, Grill, Netting, Fencing, Reinforcing fabric, Expanded metal, Screw studs, Studding, Electro-plating anodes, Hand knitting needles, Hand knitting pins, Crochet hooks, Aluminium wire, Aluminium gauze, Aluminium cloth, Aluminium grill, Aluminium netting, Aluminium reinforcing fabric, Aluminium expanded metal, Aluminium spools, Aluminium reels, Wrought magnesium, Magnesium wire, Magnesium plates, Magnesium sheets, Magnesium strip, Magnesium foil, Magnesium raspings, Magnesium shavings, Magnesium powders, Magnesium flakes, Magnesium tubes, Magnesium pipes, Magnesium hollow bars, Unwrought lead, Argentiferous lead, Lead waste, Lead scrap, Wrought lead bars, Wrought lead rods, Wrought lead angles, Wrought lead shapes, Wrought lead sections, Lead wire, Wrought lead plates, Wrought lead sheets, Wrought lead strip, Lead foil, Lead powders, Lead flakes, Lead tubes, Lead pipes, Lead hollow bars, Lead tube fittings, Lead pipe fittings, Unwrought tin, Tin waste, Tin scrap, Wrought tin bars, Wrought tin rods, Wrought tin angles, Wrought tin shapes, Wrought tin sections, Tin wire, Tin tubes, Tin pipes, Tin hollow bars, Tin tube fittings, Tin pipe fittings, Spades, Forks, Hacksaw blades, Circular saw blades, Bandsaw blades, Toothed bandsaw strip, Hand saw blades, Machine saw blades, Pliers, Cutting pliers, Pincers, Tweezers, Tinner’s snips, Bolt croppers, Perforating punches, Pipe cutters, Spanners, Wrenches, Files, Rasps, G clamps, Interchangeable tools, Machine tools, Power-operated hand tools, Wire drawing dies, Extrusion dies, Metal drilling bits, Rock drilling bits, Coffee-mills, Mincers, Juice-extractors, Domestic appliances, Knives, Blades, Kitchen knives, Butchers’ knives, Slaughtermen’ss knives, Razors, Razor blades, Spoons, Forks, Fish-eaters, Butter-knives, Ladles, Kitchenware, Tableware, Locks, Padlocks, Fittings for spring blind rollers, Fittings for trunks, Hinges of base metal peculiar to use in making suitcases and other travel goods, Base metal fittings when declared by a manufacturer for use by him only in the manufacture and repair of saddlery, Base metal fittings when declared by an importer that they will be sold only to manufacturers for use in the manufacture and repair of saddlery, Staples, Drawing board clips, spring steel, of a kind designed for holding materials to drawing boards, Lamps, shadowless, specially designed for use in hospital theatres and dentists’ surgeries, Frames with clasps of base metal for handbags and the like, Other, including beads and spangles, of base metal, Bells and gongs, non-electric, of base metal, and parts thereof of base metal for cycles, Producer gas and water gas generators, with or without purifiers, Acetylene gas generators (water process) and similar gas generators, with or without purifiers, Vehicle engines for propelling cycles and tractors, Compression ignition engines for propelling vehicles of Tariff Chapter 87, Other kinds of vehicle engines, Pistons, cylinder sleeves, piston rings, valves and valve seat inserts, mufflers and other parts suited for use in cycle and tractor engines on declaration under the Customs Act that they will be so used, Pins, piston, not being plain unworked metal rods or tubes, Piston castings in the rough, as may be approved by the Minister of Customs under Part II of the Customs Tariff, Vehicle engine carburettors, Hydraulic engines and motors (excluding gear type motors), Wind engines (windmills), Other engines and motors (other than marine jet propulsion units, whether or not mounted on motors), Pumps, fuel, lubricating oil and water, specially suited for use with vehicle engines, Air compressor outfits of a capacity exceeding 128 litres/second (270 cfm) free air delivered (F.A.D.) at 690 kPa (100 p.s.i.) at inlet condition of 101 kPa (14.7 p.s.i.) and 21.1°C temperature (F.A.D. defined by B.S. 1571, 1949), and parts thereof, Other air compressors of a capacity less than 0.94 litres/second (2 cfm) or exceeding 24 litres/second (50cfm) dis-placement at pressures up to 1.379 MPa (200 p.s.i.), and parts thereof, Free-piston generators for gas turbines and parts thereof, Fans and blowers, as may be approved by the Minister, Evaporators and condensers for household refrigerators, Calendering and similar rolling machines (other than metal-working and metal-rolling machines and glass-working machines) and cylinders therefor, Washing machines for bottles and other containers, Butter packing or wrapping machines, Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting and checking machines, weighing machine weights of all kinds, other than as may be determined by the Minister, Spray guns and similar appliances, Steam or sand blasting machines and similar jet projecting machines, Spur gear type chain hoists, chain pulley tackle, manually operated, Bases, self-propelled, crawler tractor type, of machines classified within Tariff Heading 84.22 specifically approved by the Minister of Customs for admission under Part II of the Customs Tariff, Escalators specially designed for permanent installation in buildings, Loaders, shovel type, specially designed for use in underground mines, Stands, drill, being catalogued accessories of portable electric power tools, Other kinds of excavating machinery, other than as may be determined by the Minister, Rock boring machinery and coal or rock cutters, Bases, self-propelled, crawler tractor type, of machines classified within Tariff Heading 84.23 (excluding bulldozer blades, buckets and the like and their actuating equipment) being those specifically approved by the Minister of Customs as admissible under Part II of the Tariff, Road graders, exceeding 14 514 kg in weight, Snow ploughs, other than self-propelled, Agricultural and horticultural machinery for soil preparation or cultivation; lawn and sports ground rollers viz: designed for use solely with garden tractors, Parts of ploughs, viz: mould-board plates, unbent; steel shareplates cut to pattern; skeith plates; plough beam forgings; discs for ploughs, Agricultural and horticultural machinery for soil preparation or cultivation; lawn and sports ground rollers viz: parts

As the Gazette has been published for more than 185 years, copyright status depends on the publication date of each issue:

1840–1925 (Public Domain): Issues of the New Zealand Gazette and Provincial Gazettes from this period are in the public domain, as the term of Crown copyright (100 years) has expired. Mechanical reproductions (e.g., scanned PDFs) of these public domain documents do not attract new copyright.
1926–1999 (Crown Copyright): Issues from this period remain subject to Crown copyright. Usage of these issues in this project is "Fair Dealing" for research purposes and consistent with the spirit of the open-access principles championed by NZGOAL, ie, "The default licensing position under ... NZGOAL is the Creative Commons Attribution 4.0 International licence ... [t]o the greatest extent possible, agencies should apply this licence to copyright material on their websites"
2000–Present (CC-BY 3.0 NZ): Gazette issues published on gazette.govt.nz are Crown copyright but are explicitly licensed by the Department of Internal Affairs under the Creative Commons Attribution 3.0 New Zealand licence (CC-BY 3.0 NZ). This project redistributes this content in accordance with those terms.

Nothing in this project is intended to infringe copyright, trademark law or personal privacy. Please contact me immediately if you have any concerns.

Third-Party Content

Where third-party content (e.g., notices submitted by external organisations) is identified within the Gazette, users should satisfy themselves regarding the copyright status of that specific content, as it may be subject to different ownership terms than the Gazette itself.

Sources and Attribution

NZ Gazette Sources

The primary sources for the issues of the NZ Gazette indexed by this project are:

New Zealand Gazette Archive, provided by Victoria University Library, copyright 2008 LexisNexis NZ Limited, Crown Copyright of New Zealand Gazette Office
- Issues from 1841-2008, including the New Munster, New Ulster, and Provincial Gazettes
New Zealand Gazettes by New Zealand Legal Information Institute (note: "NZLII is not the copyright owner in the source documents published on NZLII")
- Issues from 1913-1999
Gazette.govt.nz, Crown copyright / licensed by the Department of Internal Affairs under CC-BY 3.0 NZ
- Issues from 2000-2017

Additional Sources

Wellington City Recollect have made available a comprehensive and excellent-quality scan of the Wellington Provincial Gazette which was used to fill in a number of issues missing from Victoria University's Gazette Archive; in particular, all 1856 issues, issues 22-34 for 1864 and issues 9-19 for 1870.
27 issues of The New Zealand Advertiser and Bay of Islands Gazette (1840) were sourced from Papers Past (public domain).
Gazette Extraordinary No. 1 (1840), held at the Alexander Turnbull Library, Wellington, New Zealand. Imaged by Luke Howison at the National Library reading rooms; PDF released into the public domain.

PDF Icon

The PDF PDF Icon was made by Good Ware, CC BY-SA 4.0.

Masthead

The logo in the header is an edited version of “Winning Coat of Arms Competition Entry, 1908” by Archives New Zealand, CC BY 2.0 (found via Wikipedia).

Who made this?

I'm Luke Howison, a freelance web developer with an interest in genealogy. I have created several websites for genealogical research, such as NZ Ancestor Search Helper.