1526
THE NEW ZEALAND GAZETTE
No. 45

Waimea County Council Bylaw Confirmed

The following certificate has been executed on the sealed copy of the Waimea County Dog Control Bylaw 1978, made by the Waimea County Council on 31 March 1978.

Signed at Wellington this 16th day of May 1978.

KEN COMBER, for Minister of Local Government.

CERTIFICATE OF CONFIRMATION

PURSUANT to the Bylaws Act 1910, I hereby confirm the above written bylaw and declare that the same came into force on the 10th day of April 1978.

Signed at Wellington this 16th day of May 1978.

KEN COMBER, for Minister of Local Government.

(I.A. 103/6/202)

Boundaries of City of Manukau Altered

It is hereby notified that pursuant to section 50 (2) (b) of the Local Government Act 1974, the boundaries of the City of Manukau are altered by including within the city, land reclaimed from Manukau Harbour and described in the Schedule thereto:

SCHEDULE

Lot 1, with an area of 482 m², and Lot 2, with an area of 2088 m², on L.T. plan 78842, C.T. 9B/1172, being lands reclaimed from the bed of Manukau Harbour, situated in Block XIV, Otahuhu Survey District, North Auckland Land Registry.

Signed at Wellington this 16th day of May 1978.

KEN COMBER, for Minister of Local Government.

(I.A. 103/5/290)

Post Office Bonus Bonds Weekly Prize Draw No. 3, May 1978

PURSUANT to the Post Office Act 1959, notice is hereby given that the result of the weekly prize draw No. 3, for 20 May 1978 is as follows:

One prize of $7,500: 996 265375

P. I. WILKINSON, Postmaster-General.

Consent to the Distribution of New Therapeutic Drugs

PURSUANT to section 12 of the Food and Drug Act 1969, the Minister of Health hereby consents to the distribution in New Zealand of the new therapeutic drug set out in the Schedule hereto.

SCHEDULE

Name of Drug Form Active Ingredients (as listed on label) Name of Manufacturer Address
Bancig Solution Silver Nitrate 0.25% W/V .. Frank Stevens Ltd. New Zealand

Dated this 18th day of May 1978.

FRANK GILL, Minister of Health.

Price Order No. 91 (Steel Products Manufactured by Pacific Steel Ltd.)

PURSUANT to the Commerce Act 1975, I, Desmond James Gasson, pursuant to a delegation from the Secretary of Trade and Industry, hereby make the following price order:

PRELIMINARY

1. This order may be cited as Price Order No. 91 and shall come into force on the 26th day of May 1978.

2. (1) Price Order No. 83* is hereby revoked.

3. In this order:

The expression “f.o.r.” means “free on rail”, and the expression “c and f” means “cost and freight”.

APPLICATION OF THIS ORDER

4. This order applies to the following steel products manufactured by Pacific Steel Ltd.:

Rolled and Rerolled Steel Bars

1. Rounds
2. Squares
3. Flats
4. Angles
5. Channels

MAXIMUM PRICES TO BE CHARGED

5. (1) The maximum factory selling prices that may be charged or received by Pacific Steel Ltd. for any steel products to which this order applies shall be the basis price shown in this order, with adjustments in the form of extras as specified hereunder being made as appropriate.

(2) The maximum prices, as aforesaid, are fixed for deliveries as follows:

(a) Within a radius of 40 kilometres of Otahuhu, frec on truck at mill.

(b) “f.o.r.” Whangarei, Hamilton, Rotorua, Tauranga, Gisborne, Napier, Hastings, Palmerston North, New Plymouth, Wanganui, Masterton, Lower Hutt, Wellington Blenheim, Christchurch, and Invercargill.

(c) Landed on wharf or at railhead at Lyttelton, Timaru, Oamaru, Nelson, Greymouth, Dunedin, and Bluff.

(d) For sales to other areas, the approved maximum selling prices may be surcharged with the amount which does not exceed the actual freight incurred for transport of steel from the nearest freight paid point mentioned above.

(3) The maximum basis price shall be $397.05 per tonne, and shall apply to mild steel concrete reinforcing bars made in conformity with New Zealand Standard 3402 P: 1973, angles, channels, flats, squares, and rounds other than reinforcing made in conformity with British Standard 4360: Grades 43A, 43A. 1.

(4) The basis price shall cover the following sizes:

Rounds 20 mm diameter and over
Squares 12 mm to 75 mm
Flats } All shapes and sizes not included in 6 (1)
Angles } below.

(N.B. The company is not making basis size channels—203 mm × 76 mm × 24 kg/m and over.)

(5) The basis price shall cover lengths from 5 m to 10 m.

(6) The basis price shall cover the following quantities:

Rounds, 4 tonnes and over
Squares, 4 tonnes and over
Flats, 4 tonnes and over
Angles, 4 tonnes and over

} In one size and thickness or diameter and in one quality

(7) The basis price shall cover the cold straightening of angles.

EXTRAS

6. The maximum charges for extras as appropriate are as follows:

(1) Size (added to Basis Price)

Rounds—
Reinforcing and engineering: Per Tonne
6.5 mm .. .. .. .. .. .. .. $ c
10 mm .. .. .. .. .. .. .. 10 75
12 mm .. .. .. .. .. .. .. 8 00
16 mm .. .. .. .. .. .. .. 4 00

Squares, 10 mm .. .. .. .. .. 1 00

3 50