Tariff Notices




4 AUGUST
THE NEW ZEALAND GAZETTE
2155

Tariff Notice No. 1977/129—Applications for Approval

Notice is hereby given that applications have been made to the Minister of Customs for concessional entry of the following goods at the rates of Customs Duty shown:

Appn. No. Tariff Item Goods Rates of Duty Part II Ref.
Normal Other Pref.
43715 82.05.002 Press die for forming and blanking from M/S strip and bar for use in the manufacture of 3 way rear van door locks Free* Free* ..
43707 82.06.009 Blades for hydraulic and pneumatic cutters for the removal of animal horns and hocks in freezing works and abattoirs Free* Free* 10.2
42719 82.06.009 Pneumatic dehider blades for meat works dehiding machines Free* Free* 10.2
43726 84.10.009 AB Kelva VP12-010 ink pump, to be used to pump and maintain a fixed level of ink in the ink duct of a flexible packaging printing machine Free* Free* 10.2
43594 84.10.009 Lee Howl 203.2 mm/254 mm (8 in./10 in.) Non-Clog centrifugal pump for sewage, semi-solids, and slurries for use in sewage works, cement works, tanneries, and paper pulp works Free* Free* 10.2
43621 84.11.081 Fan impellers with cooling discs and cowl rings to be assembled with locally made shafts, bearings and housings to produce S.F. PCMA 125 fans Free* Free* ..
43672 84.17.128 “Linco” scald tank for use in preparing poultry prior to plucking on an automatic poultry processing line Free* Free* 10.2
43569 84.17.128 Ophthalmic Spectacle lens chemical strengthening unit—A.I.T. 405 dual chemical hardening unit, for the toughening or strengthening of glass ophthalmic spectacle lenses Free* Free* 10.2
43692 84.18.139 Hanovia ultra-violet water sterilizer, for use in the sterilization of water by ultra-violet rays Free* Free* 10.2
42562 84.21.009 Graco EH 433 GT Hydraspray airless spray units for application of paints, coatings and adhesives Free* Free* 10.2
43663 84.21.009 Plaster spraying machine Free* Free* 10.2
43713 84.22.028 Madill log yarding machine for logging exotic timber Free* Free* 10.2
43564 84.22.028 Conveyor, for use as part of a Pearson twin adjustable six pack machine Free* Free* 10.2
43673 84.22.028 “Linco” Silverlink overhead conveyor system for use on an automatic poultry processing line, for killing, plucking, drawing, cleaning, and chilling poultry Free* Free* 10.2
43724 84.22.048 Jacking unit components for transit ready-mix concrete trucks Free* Free* 10.2
43671 84.22.048 “Linco” foot unloader (automatic), to unload feet from the conveyor onto an automatic poultry processing line Free* Free* 10.2
43675 84.30.005 “Linco” automatic plucking machine, stunning machine, automatic killing machine, head pulling machine, eviscerating machine, hock cutter, scrub washer and spiral chiller machine, for killing, plucking, and drawing poultry Free* Free* 10.2
43563 84.40.159 Jiffy steamer Deluxe model J3, for the steaming of fabrics and articles of fabrics Free* Free* 10.2
43716 84.45.019 TRB 3 wire drawing machine Free* Free* 10.2
43747 84.45.029 3 only Heine punch presses 17, 30–60 ton capacities Free* Free* 10.2
43668 84.47.039 3 only H.M.E. punch presses, 75–100 ton capacities Free* Free* 10.2
Boucherie shaping and profiling machine to shape and profile wooden blocks for painters’ brushware Free* Free* 10.2
43714 84.59.102 Cam presses for use in the manufacture of electrical switches Free* Free* 10.2
43723 84.59.102 High density fully automatic waste paper baling machine for the high density baling of waste paper generated during the manufacture of corrugated cardboard Free* Free* 10.2
43664 84.59.148 Amphenol Tyree connector working tool, for the local assembly of printed circuit board edge connectors Free* Free* 10.2
43559 84.59.148 Kelley 24GF power float for smoothing wet concrete Free* Free* 10.2
43670 84.59.148 Milliken nailing machine for use in the manufacture of brushware Free* Free* 10.2
43719 84.59.148 Omez plastic curving press, models: M2800, M3050, M3800, for curving of post-forming and thermoplastic laminates Free* Free* 10.2
43597 85.01.011 Electric motor exceeding 7 kW, but not exceeding 746W, being associated electrical equipment required as replacement for those parts fitted in the bag filler machine Free* Free* 10.2
43615 85.11.001 Flash butt welding machine, model ML 75 10 KVA, for the butt welding of heating coils for Clayton steam and hot water high pressure cleaners Free* Free* 10.2
43662 85.15.309 Broadcast transmitter to studio-fixed service VHF frequency modulation link equipment, i.e., Mosely model PCL 101 system, for Radio reporter service Free* Free* 10.2
43625 85.17.009 Stone-Chance type ZP20 “Seagull” marine navigation beacon (flashing) to delineate channels, indicate turning points and to indicate the position of hazards, e.g., wrecks, shoals, etc. Free* Free* 10.2
43593 85.22.209 Bird RF peak amplifier for testing and repair of electronic equipment Free* Free* 10.2
43591 85.25.000 Toughened glass insulators, having a dry flashover value in excess of 75 kV and an electro-mechanical strength of 20,000 lbs, for the suspension of high voltage power lines Free* Free* 10.1
43649 90.22.000 B.O.F.S. tyre test machine, to test tyres under load, speed and heat Free* Free* 10.2
43648 90.22.000 Tyre plunger test machine and bead and unseating fixture Free* Free* 10.2
43809 90.26.119 Sprague combination gas meter/regulator, model 175 RM Free* Free* 10.2
43281 90.28.009 Paton miniature electronic indicators, models 200 H and 200 V, used to indicate 4–20 MA signals from process transmitters (pressure, flow, level, etc.) Free* Free* 10.2
43463 92.11.021 Automatic telephone answering sets including those which record the caller’s message, viz, Crown CTA 4100, CTA 4450, CTA 4510, CTA 4610 and CTA 4800, for use as re-sale and rental to end users in medical, professional and commercial fields Free* Free* 10.2

*or such higher rate of duty as the Minister may in any case decide

Any person wishing to lodge an objection to the granting of these applications should do so in writing on or before 25 August 1977. Submissions should include a reference to the application number, Tariff item and description of goods concerned, be addressed to the Comptroller of Customs, Private Bag, Wellington, and supported by information as to:

(a) The range of equivalent goods manufactured locally;
(b) The proportion of New Zealand and imported material used in manufacture;
(c) Present and potential output; and
(d) Details of factory cost in terms of materials, labour, overhead, etc.

Dated at Wellington this 4th day of August 1977.

J. A. KEAN, Comptroller of Customs.



Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1977, No 83


NZLII PDF NZ Gazette 1977, No 83





✨ LLM interpretation of page content

🏭 Applications for Concessional Entry of Goods

🏭 Trade, Customs & Industry
4 August 1977
Tariff, Concessional Entry, Customs Duty, Applications, Goods
  • J. A. Kean, Comptroller of Customs